[PATCH 1/3] uacce: supports device isolation feature
Zhangfei Gao
zhangfei.gao at linaro.org
Wed Jun 15 00:14:38 AEST 2022
On 2022/6/14 下午8:29, Kai Ye wrote:
> UACCE add the hardware error isolation API. Users can configure
> the error frequency threshold by this vfs node. This API interface
> certainly supports the configuration of user protocol strategy. Then
> parse it inside the device driver. UACCE only reports the device
> isolate state. When the error frequency is exceeded, the device
> will be isolated. The isolation strategy should be defined in each
> driver module.
>
> Signed-off-by: Kai Ye <yekai13 at huawei.com>
> Reviewed-by: Zhou Wang <wangzhou1 at hisilicon.com>
> ---
> drivers/misc/uacce/uacce.c | 51 ++++++++++++++++++++++++++++++++++++++
> include/linux/uacce.h | 15 ++++++++++-
> 2 files changed, 65 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c
> index b6219c6bfb48..4d9d9aeb145a 100644
> --- a/drivers/misc/uacce/uacce.c
> +++ b/drivers/misc/uacce/uacce.c
> @@ -12,6 +12,20 @@ static dev_t uacce_devt;
> static DEFINE_MUTEX(uacce_mutex);
> static DEFINE_XARRAY_ALLOC(uacce_xa);
>
> +static int cdev_get(struct device *dev, void *data)
> +{
> + struct uacce_device *uacce;
> + struct device **t_dev = data;
> +
> + uacce = container_of(dev, struct uacce_device, dev);
> + if (uacce->parent == *t_dev) {
> + *t_dev = dev;
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> static int uacce_start_queue(struct uacce_queue *q)
> {
> int ret = 0;
> @@ -346,12 +360,47 @@ static ssize_t region_dus_size_show(struct device *dev,
> uacce->qf_pg_num[UACCE_QFRT_DUS] << PAGE_SHIFT);
> }
>
> +static ssize_t isolate_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct uacce_device *uacce = to_uacce_device(dev);
> +
> + return sysfs_emit(buf, "%d\n", uacce->ops->get_isolate_state(uacce));
Are these two isolate ops required or optional?
Do we need consider NULL pointer?
Thanks
More information about the Linux-accelerators
mailing list