[PATCH V3 2/2] dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver

[Jon Hunter]

Vinod, Tony, Benoit,

On 02/26/2013 12:27 PM, Jon Hunter wrote:
> If the device-tree blob is present during boot, then register the SDMA
> controller with the device-tree DMA driver so that we can use device-tree
> to look-up DMA client information.
> 
> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
> Reviewed-by: Felipe Balbi <balbi at ti.com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Tested-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> ---
>  arch/arm/mach-omap2/dma.c |    4 ++++
>  drivers/dma/omap-dma.c    |   38 ++++++++++++++++++++++++++++++++++++--
>  2 files changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
> index dab9fc0..49fd0d5 100644
> --- a/arch/arm/mach-omap2/dma.c
> +++ b/arch/arm/mach-omap2/dma.c
> @@ -28,6 +28,7 @@
>  #include <linux/init.h>
>  #include <linux/device.h>
>  #include <linux/dma-mapping.h>
> +#include <linux/of.h>
>  #include <linux/omap-dma.h>
>  
>  #include "soc.h"
> @@ -304,6 +305,9 @@ static int __init omap2_system_dma_init(void)
>  	if (res)
>  		return res;
>  
> +	if (of_have_populated_dt())
> +		return res;
> +
>  	pdev = platform_device_register_full(&omap_dma_dev_info);
>  	if (IS_ERR(pdev))
>  		return PTR_ERR(pdev);
> diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
> index c4b4fd2..2ea3d7e 100644
> --- a/drivers/dma/omap-dma.c
> +++ b/drivers/dma/omap-dma.c
> @@ -16,6 +16,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/slab.h>
>  #include <linux/spinlock.h>
> +#include <linux/of_dma.h>
> +#include <linux/of_device.h>
>  
>  #include "virt-dma.h"
>  
> @@ -67,6 +69,10 @@ static const unsigned es_bytes[] = {
>  	[OMAP_DMA_DATA_TYPE_S32] = 4,
>  };
>  
> +static struct of_dma_filter_info omap_dma_info = {
> +	.filter_fn = omap_dma_filter_fn,
> +};
> +
>  static inline struct omap_dmadev *to_omap_dma_dev(struct dma_device *d)
>  {
>  	return container_of(d, struct omap_dmadev, ddev);
> @@ -621,8 +627,22 @@ static int omap_dma_probe(struct platform_device *pdev)
>  		pr_warn("OMAP-DMA: failed to register slave DMA engine device: %d\n",
>  			rc);
>  		omap_dma_free(od);
> -	} else {
> -		platform_set_drvdata(pdev, od);
> +		return rc;
> +	}
> +
> +	platform_set_drvdata(pdev, od);
> +
> +	if (pdev->dev.of_node) {
> +		omap_dma_info.dma_cap = od->ddev.cap_mask;
> +
> +		/* Device-tree DMA controller registration */
> +		rc = of_dma_controller_register(pdev->dev.of_node,
> +				of_dma_simple_xlate, &omap_dma_info);
> +		if (rc) {
> +			pr_warn("OMAP-DMA: failed to register DMA controller\n");
> +			dma_async_device_unregister(&od->ddev);
> +			omap_dma_free(od);
> +		}
>  	}
>  
>  	dev_info(&pdev->dev, "OMAP DMA engine driver\n");
> @@ -634,18 +654,32 @@ static int omap_dma_remove(struct platform_device *pdev)
>  {
>  	struct omap_dmadev *od = platform_get_drvdata(pdev);
>  
> +	if (pdev->dev.of_node)
> +		of_dma_controller_free(pdev->dev.of_node);
> +
>  	dma_async_device_unregister(&od->ddev);
>  	omap_dma_free(od);
>  
>  	return 0;
>  }
>  
> +static const struct of_device_id omap_dma_match[] = {
> +	{ .compatible = "ti,omap2420-sdma", },
> +	{ .compatible = "ti,omap2430-sdma", },
> +	{ .compatible = "ti,omap3430-sdma", },
> +	{ .compatible = "ti,omap3630-sdma", },
> +	{ .compatible = "ti,omap4430-sdma", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, omap_dma_match);
> +
>  static struct platform_driver omap_dma_driver = {
>  	.probe	= omap_dma_probe,
>  	.remove	= omap_dma_remove,
>  	.driver = {
>  		.name = "omap-dma-engine",
>  		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(omap_dma_match),
>  	},
>  };

Who's tree does it make most sense for this patch to go through?

Benoit has queued up patch 1/2 and so I am not sure if this should go
via Benoit tree to Tony or directly via Vinod's tree. What are your
thoughts?

It would be great if this could make v3.10.

Cheers
Jon