[PATCH v6 02/18] sh-pfc: Add DT support
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Jun 17 21:00:38 EST 2013
Hi Simon,
On Monday 17 June 2013 16:03:16 Simon Horman wrote:
> Hi Laurent,
>
> As 3.10-rc6 has been released it is probably now too late for me
> to take this series through the renesas tree for v3.11.
>
> I am happy for Linus to take it if that is what he would like to do.
OK.
Linus, would you like to take the series through your tree, or push it back to
v3.12 ?
> Otherwise I think we need to discuss how this should be handled for v3.12.
>
> On Mon, Jun 17, 2013 at 05:08:25AM +0200, Laurent Pinchart wrote:
> > Hi Linus,
> >
> > Would you be able to review this patch in the near future ? I'd like to
> > push the series to v3.11.
> >
> > On Friday 14 June 2013 01:45:47 Laurent Pinchart wrote:
> > > Support device instantiation through the device tree. The compatible
> > > property is used to select the SoC pinmux information.
> > >
> > > Set the gpio_chip device field to the PFC device to enable automatic
> > > GPIO OF support.
> > >
> > > Cc: devicetree-discuss at lists.ozlabs.org
> > > Signed-off-by: Laurent Pinchart
> > > <laurent.pinchart+renesas at ideasonboard.com>
> > > ---
> > >
> > > .../bindings/pinctrl/renesas,pfc-pinctrl.txt | 135
> > > ++++++++++++++++++
> > > drivers/pinctrl/sh-pfc/core.c | 64 +++++++++-
> > > drivers/pinctrl/sh-pfc/pinctrl.c | 116
> > > ++++++++++++++++++
> > > 3 files changed, 314 insertions(+), 1 deletion(-)
> > > create mode 100644
> > >
> > > Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
> > > b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt new
> > > file mode 100644
> > > index 0000000..8264cbc
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
> > > @@ -0,0 +1,135 @@
> > > +* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
> > > +
> > > +The Pin Function Controller (PFC) is a Pin Mux/Config controller. On
> > > SH7372, +SH73A0, R8A73A4 and R8A7740 it also acts as a GPIO controller.
> > > +
> > > +
> > > +Pin Control
> > > +-----------
> > > +
> > > +Required Properties:
> > > +
> > > + - compatible: should be one of the following.
> > > + - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible
> > > pin-controller. + - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1)
> > > compatible pin-controller. + - "renesas,pfc-r8a7778": for R8A7778
> > > (R-Mobile M1) compatible pin-controller. + - "renesas,pfc-r8a7779":
> > > for
> > > R8A7779 (R-Car H1) compatible pin-controller. + -
> > > "renesas,pfc-r8a7790":
> > > for R8A7790 (R-Car H2) compatible pin-controller. + -
> > > "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible
> > > pin-controller.
> > > + - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible
> > > pin-controller. +
> > > + - reg: Base address and length of each memory resource used by the
> > > pin
> > > + controller hardware module.
> > > +
> > > +Optional properties:
> > > +
> > > + - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO,
> > > forbidden + otherwise. Should be 3.
> > > +
> > > +The PFC node also acts as a container for pin configuration nodes.
> > > Please
> > > refer +to pinctrl-bindings.txt in this directory for the definition of
> > > the
> > > term "pin +configuration node" and for the common pinctrl bindings used
> > > by
> > > client devices. +
> > > +Each pin configuration node represents desired functions to select on a
> > > pin +group or a list of pin groups. The functions and pin groups can be
> > > specified +directly in the pin configuration node, or grouped in child
> > > subnodes. Several +functions can thus be referenced as a single pin
> > > configuration node by client +devices.
> > > +
> > > +A configuration node or subnode must contain a function and reference
> > > at
> > > least +one pin group.
> > > +
> > > +All pin configuration nodes and subnodes names are ignored. All of
> > > those
> > > nodes +are parsed through phandles and processed purely based on their
> > > content. +
> > > +Pin Configuration Node Properties:
> > > +
> > > +- renesas,groups : An array of strings, each string containing the name
> > > of
> > > a pin + group.
> > > +
> > > +- renesas,function: A string containing the name of the function to mux
> > > to
> > > the + pin group(s) specified by the renesas,groups property
> > > +
> > > + Valid values for pin, group and function names can be found in the
> > > group
> > > and + function arrays of the PFC data file corresponding to the SoC
> > > + (drivers/pinctrl/sh-pfc/pfc-*.c)
> > > +
> > > +
> > > +GPIO
> > > +----
> > > +
> > > +On SH7372, SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO
> > > controller +node.
> > > +
> > > +Required Properties:
> > > +
> > > + - gpio-controller: Marks the device node as a gpio controller.
> > > +
> > > + - #gpio-cells: Should be 2. The first cell is the GPIO number and the
> > > second + cell specifies GPIO flags, as defined in
> > > <dt-bindings/gpio/gpio.h>. Only the + GPIO_ACTIVE_HIGH and
> > > GPIO_ACTIVE_LOW flags are supported.
> > > +
> > > +The syntax of the gpio specifier used by client nodes should be the
> > > following +with values derived from the SoC user manual.
> > > +
> > > + <[phandle of the gpio controller node]
> > > + [pin number within the gpio controller]
> > > + [flags]>
> > > +
> > > +On other mach-shmobile platforms GPIO is handled by the gpio-rcar
> > > driver.
> > > +Please refer to
> > > Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +for
> > > documentation of the GPIO device tree bindings on those platforms. +
> > > +
> > > +Examples
> > > +--------
> > > +
> > > +Example 1: SH73A0 (SH-Mobile AG5) pin controller node
> > > +
> > > + pfc: pfc at e6050000 {
> > > + compatible = "renesas,pfc-sh73a0";
> > > + reg = <0xe6050000 0x8000>,
> > > + <0xe605801c 0x1c>;
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > + };
> > > +
> > > +Example 2: A GPIO LED node that references a GPIO
> > > +
> > > + #include <dt-bindings/gpio/gpio.h>
> > > +
> > > + leds {
> > > + compatible = "gpio-leds";
> > > + led1 {
> > > + gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
> > > + };
> > > + };
> > > +
> > > +Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin
> > > control
> > > maps + for the MMCIF and SCIFA4 devices
> > > +
> > > + &pfc {
> > > + pinctrl-0 = <&scifa4_pins>;
> > > + pinctrl-names = "default";
> > > +
> > > + mmcif_pins: mmcif {
> > > + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
> > > + renesas,function = "mmc0";
> > > + };
> > > +
> > > + scifa4_pins: scifa4 {
> > > + renesas,groups = "scifa4_data", "scifa4_ctrl";
> > > + renesas,function = "scifa4";
> > > + };
> > > + };
> > > +
> > > +Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF
> > > device +
> > > + &mmcif {
> > > + pinctrl-0 = <&mmcif_pins>;
> > > + pinctrl-names = "default";
> > > +
> > > + bus-width = <8>;
> > > + vmmc-supply = <®_1p8v>;
> > > + status = "okay";
> > > + };
> > > diff --git a/drivers/pinctrl/sh-pfc/core.c
> > > b/drivers/pinctrl/sh-pfc/core.c
> > > index ac45084..f3fc66b 100644
> > > --- a/drivers/pinctrl/sh-pfc/core.c
> > > +++ b/drivers/pinctrl/sh-pfc/core.c
> > > @@ -18,6 +18,8 @@
> > >
> > > #include <linux/ioport.h>
> > > #include <linux/kernel.h>
> > > #include <linux/module.h>
> > >
> > > +#include <linux/of.h>
> > > +#include <linux/of_device.h>
> > >
> > > #include <linux/pinctrl/machine.h>
> > > #include <linux/platform_device.h>
> > > #include <linux/slab.h>
> > >
> > > @@ -348,13 +350,72 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned
> > > mark, int pinmux_type) return 0;
> > >
> > > }
> > >
> > > +#ifdef CONFIG_OF
> > > +static const struct of_device_id sh_pfc_of_table[] = {
> > > +#ifdef CONFIG_PINCTRL_PFC_R8A73A4
> > > + {
> > > + .compatible = "renesas,pfc-r8a73a4",
> > > + .data = &r8a73a4_pinmux_info,
> > > + },
> > > +#endif
> > > +#ifdef CONFIG_PINCTRL_PFC_R8A7740
> > > + {
> > > + .compatible = "renesas,pfc-r8a7740",
> > > + .data = &r8a7740_pinmux_info,
> > > + },
> > > +#endif
> > > +#ifdef CONFIG_PINCTRL_PFC_R8A7778
> > > + {
> > > + .compatible = "renesas,pfc-r8a7778",
> > > + .data = &r8a7778_pinmux_info,
> > > + },
> > > +#endif
> > > +#ifdef CONFIG_PINCTRL_PFC_R8A7779
> > > + {
> > > + .compatible = "renesas,pfc-r8a7779",
> > > + .data = &r8a7779_pinmux_info,
> > > + },
> > > +#endif
> > > +#ifdef CONFIG_PINCTRL_PFC_R8A7790
> > > + {
> > > + .compatible = "renesas,pfc-r8a7790",
> > > + .data = &r8a7790_pinmux_info,
> > > + },
> > > +#endif
> > > +#ifdef CONFIG_PINCTRL_PFC_SH7372
> > > + {
> > > + .compatible = "renesas,pfc-sh7372",
> > > + .data = &sh7372_pinmux_info,
> > > + },
> > > +#endif
> > > +#ifdef CONFIG_PINCTRL_PFC_SH73A0
> > > + {
> > > + .compatible = "renesas,pfc-sh73a0",
> > > + .data = &sh73a0_pinmux_info,
> > > + },
> > > +#endif
> > > + { },
> > > +};
> > > +MODULE_DEVICE_TABLE(of, sh_pfc_of_table);
> > > +#endif
> > > +
> > >
> > > static int sh_pfc_probe(struct platform_device *pdev)
> > > {
> > >
> > > + const struct platform_device_id *platid =
> > > platform_get_device_id(pdev);
> > > +#ifdef CONFIG_OF
> > > + struct device_node *np = pdev->dev.of_node;
> > > +#endif
> > >
> > > const struct sh_pfc_soc_info *info;
> > > struct sh_pfc *pfc;
> > > int ret;
> > >
> > > - info = (void *)pdev->id_entry->driver_data;
> > > +#ifdef CONFIG_OF
> > > + if (np)
> > > + info = of_match_device(sh_pfc_of_table, &pdev->dev)->data;
> > > + else
> > > +#endif
> > > + info = platid ? (const void *)platid->driver_data : NULL;
> > > +
> > >
> > > if (info == NULL)
> > >
> > > return -ENODEV;
> > >
> > > @@ -500,6 +561,7 @@ static struct platform_driver sh_pfc_driver = {
> > >
> > > .driver = {
> > >
> > > .name = DRV_NAME,
> > > .owner = THIS_MODULE,
> > >
> > > + .of_match_table = of_match_ptr(sh_pfc_of_table),
> > >
> > > },
> > >
> > > };
> > >
> > > diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c
> > > b/drivers/pinctrl/sh-pfc/pinctrl.c index 3492ec9..7e32bb8 100644
> > > --- a/drivers/pinctrl/sh-pfc/pinctrl.c
> > > +++ b/drivers/pinctrl/sh-pfc/pinctrl.c
> > > @@ -14,7 +14,9 @@
> > >
> > > #include <linux/err.h>
> > > #include <linux/init.h>
> > > #include <linux/module.h>
> > >
> > > +#include <linux/of.h>
> > >
> > > #include <linux/pinctrl/consumer.h>
> > >
> > > +#include <linux/pinctrl/machine.h>
> > >
> > > #include <linux/pinctrl/pinconf.h>
> > > #include <linux/pinctrl/pinconf-generic.h>
> > > #include <linux/pinctrl/pinctrl.h>
> > >
> > > @@ -72,11 +74,125 @@ static void sh_pfc_pin_dbg_show(struct pinctrl_dev
> > > *pctldev, struct seq_file *s, seq_printf(s, "%s", DRV_NAME);
> > >
> > > }
> > >
> > > +static int sh_pfc_dt_subnode_to_map(struct device *dev, struct
> > > device_node
> > > *np, + struct pinctrl_map **map,
> > > + unsigned int *num_maps, unsigned int *index)
> > > +{
> > > + struct pinctrl_map *maps = *map;
> > > + unsigned int nmaps = *num_maps;
> > > + unsigned int idx = *index;
> > > + const char *function = NULL;
> > > + struct property *prop;
> > > + const char *group;
> > > + int ret;
> > > +
> > > + /* Parse the function and configuration properties. At least a
> > > function
> > > + * or one configuration must be specified.
> > > + */
> > > + ret = of_property_read_string(np, "renesas,function", &function);
> > > + if (ret < 0 && ret != -EINVAL) {
> > > + dev_err(dev, "Invalid function in DT\n");
> > > + return ret;
> > > + }
> > > +
> > > + if (!function) {
> > > + dev_err(dev, "DT node must contain at least one function\n");
> > > + goto done;
> > > + }
> > > +
> > > + /* Count the number of groups and reallocate mappings. */
> > > + ret = of_property_count_strings(np, "renesas,groups");
> > > + if (ret < 0 && ret != -EINVAL) {
> > > + dev_err(dev, "Invalid pin groups list in DT\n");
> > > + goto done;
> > > + }
> > > +
> > > + if (!ret) {
> > > + dev_err(dev, "No group provided in DT node\n");
> > > + ret = -ENODEV;
> > > + goto done;
> > > + }
> > > +
> > > + nmaps += ret;
> > > +
> > > + maps = krealloc(maps, sizeof(*maps) * nmaps, GFP_KERNEL);
> > > + if (maps == NULL) {
> > > + ret = -ENOMEM;
> > > + goto done;
> > > + }
> > > +
> > > + *map = maps;
> > > + *num_maps = nmaps;
> > > +
> > > + /* Iterate over pins and groups and create the mappings. */
> > > + of_property_for_each_string(np, "renesas,groups", prop, group) {
> > > + maps[idx].type = PIN_MAP_TYPE_MUX_GROUP;
> > > + maps[idx].data.mux.group = group;
> > > + maps[idx].data.mux.function = function;
> > > + idx++;
> > > + }
> > > +
> > > + ret = 0;
> > > +
> > > +done:
> > > + *index = idx;
> > > + return ret;
> > > +}
> > > +
> > > +static void sh_pfc_dt_free_map(struct pinctrl_dev *pctldev,
> > > + struct pinctrl_map *map, unsigned num_maps)
> > > +{
> > > + kfree(map);
> > > +}
> > > +
> > > +static int sh_pfc_dt_node_to_map(struct pinctrl_dev *pctldev,
> > > + struct device_node *np,
> > > + struct pinctrl_map **map, unsigned *num_maps)
> > > +{
> > > + struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
> > > + struct device *dev = pmx->pfc->dev;
> > > + struct device_node *child;
> > > + unsigned int index;
> > > + int ret;
> > > +
> > > + *map = NULL;
> > > + *num_maps = 0;
> > > + index = 0;
> > > +
> > > + for_each_child_of_node(np, child) {
> > > + ret = sh_pfc_dt_subnode_to_map(dev, child, map, num_maps,
> > > + &index);
> > > + if (ret < 0)
> > > + goto done;
> > > + }
> > > +
> > > + /* If no mapping has been found in child nodes try the config node.
*/
> > > + if (*num_maps == 0) {
> > > + ret = sh_pfc_dt_subnode_to_map(dev, np, map, num_maps, &index);
> > > + if (ret < 0)
> > > + goto done;
> > > + }
> > > +
> > > + if (*num_maps)
> > > + return 0;
> > > +
> > > + dev_err(dev, "no mapping found in node %s\n", np->full_name);
> > > + ret = -EINVAL;
> > > +
> > > +done:
> > > + if (ret < 0)
> > > + sh_pfc_dt_free_map(pctldev, *map, *num_maps);
> > > +
> > > + return ret;
> > > +}
> > > +
> > >
> > > static const struct pinctrl_ops sh_pfc_pinctrl_ops = {
> > >
> > > .get_groups_count = sh_pfc_get_groups_count,
> > > .get_group_name = sh_pfc_get_group_name,
> > > .get_group_pins = sh_pfc_get_group_pins,
> > > .pin_dbg_show = sh_pfc_pin_dbg_show,
> > >
> > > + .dt_node_to_map = sh_pfc_dt_node_to_map,
> > > + .dt_free_map = sh_pfc_dt_free_map,
> > >
> > > };
> > >
> > > static int sh_pfc_get_functions_count(struct pinctrl_dev *pctldev)
--
Regards,
Laurent Pinchart
More information about the devicetree-discuss
mailing list