[PATCH v6 02/18] sh-pfc: Add DT support

Simon Horman horms at verge.net.au
Mon Jun 17 17:03:16 EST 2013


Hi Laurent,

As 3.10-rc6 has been released it is probably now too late for me
to take this series through the renesas tree for v3.11.

I am happy for Linus to take it if that is what he would like to do.

Otherwise I think we need to discuss how this should be handled for v3.12.

On Mon, Jun 17, 2013 at 05:08:25AM +0200, Laurent Pinchart wrote:
> Hi Linus,
> 
> Would you be able to review this patch in the near future ? I'd like to push 
> the series to v3.11.
> 
> On Friday 14 June 2013 01:45:47 Laurent Pinchart wrote:
> > Support device instantiation through the device tree. The compatible
> > property is used to select the SoC pinmux information.
> > 
> > Set the gpio_chip device field to the PFC device to enable automatic
> > GPIO OF support.
> > 
> > Cc: devicetree-discuss at lists.ozlabs.org
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> >  .../bindings/pinctrl/renesas,pfc-pinctrl.txt       | 135 ++++++++++++++++++
> >  drivers/pinctrl/sh-pfc/core.c                      |  64 +++++++++-
> >  drivers/pinctrl/sh-pfc/pinctrl.c                   | 116 ++++++++++++++++++
> >  3 files changed, 314 insertions(+), 1 deletion(-)
> >  create mode 100644
> > Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
> > b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt new
> > file mode 100644
> > index 0000000..8264cbc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
> > @@ -0,0 +1,135 @@
> > +* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
> > +
> > +The Pin Function Controller (PFC) is a Pin Mux/Config controller. On
> > SH7372, +SH73A0, R8A73A4 and R8A7740 it also acts as a GPIO controller.
> > +
> > +
> > +Pin Control
> > +-----------
> > +
> > +Required Properties:
> > +
> > +  - compatible: should be one of the following.
> > +    - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible
> > pin-controller. +    - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1)
> > compatible pin-controller. +    - "renesas,pfc-r8a7778": for R8A7778
> > (R-Mobile M1) compatible pin-controller. +    - "renesas,pfc-r8a7779": for
> > R8A7779 (R-Car H1) compatible pin-controller. +    - "renesas,pfc-r8a7790":
> > for R8A7790 (R-Car H2) compatible pin-controller. +    -
> > "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller.
> > +    - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible
> > pin-controller. +
> > +  - reg: Base address and length of each memory resource used by the pin
> > +    controller hardware module.
> > +
> > +Optional properties:
> > +
> > +  - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO,
> > forbidden +    otherwise. Should be 3.
> > +
> > +The PFC node also acts as a container for pin configuration nodes. Please
> > refer +to pinctrl-bindings.txt in this directory for the definition of the
> > term "pin +configuration node" and for the common pinctrl bindings used by
> > client devices. +
> > +Each pin configuration node represents desired functions to select on a pin
> > +group or a list of pin groups. The functions and pin groups can be
> > specified +directly in the pin configuration node, or grouped in child
> > subnodes. Several +functions can thus be referenced as a single pin
> > configuration node by client +devices.
> > +
> > +A configuration node or subnode must contain a function and reference at
> > least +one pin group.
> > +
> > +All pin configuration nodes and subnodes names are ignored. All of those
> > nodes +are parsed through phandles and processed purely based on their
> > content. +
> > +Pin Configuration Node Properties:
> > +
> > +- renesas,groups : An array of strings, each string containing the name of
> > a pin +  group.
> > +
> > +- renesas,function: A string containing the name of the function to mux to
> > the +  pin group(s) specified by the renesas,groups property
> > +
> > +  Valid values for pin, group and function names can be found in the group
> > and +  function arrays of the PFC data file corresponding to the SoC
> > +  (drivers/pinctrl/sh-pfc/pfc-*.c)
> > +
> > +
> > +GPIO
> > +----
> > +
> > +On SH7372, SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO
> > controller +node.
> > +
> > +Required Properties:
> > +
> > +  - gpio-controller: Marks the device node as a gpio controller.
> > +
> > +  - #gpio-cells: Should be 2. The first cell is the GPIO number and the
> > second +    cell specifies GPIO flags, as defined in
> > <dt-bindings/gpio/gpio.h>. Only the +    GPIO_ACTIVE_HIGH and
> > GPIO_ACTIVE_LOW flags are supported.
> > +
> > +The syntax of the gpio specifier used by client nodes should be the
> > following +with values derived from the SoC user manual.
> > +
> > +  <[phandle of the gpio controller node]
> > +   [pin number within the gpio controller]
> > +   [flags]>
> > +
> > +On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
> > +Please refer to
> > Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +for
> > documentation of the GPIO device tree bindings on those platforms. +
> > +
> > +Examples
> > +--------
> > +
> > +Example 1: SH73A0 (SH-Mobile AG5) pin controller node
> > +
> > +	pfc: pfc at e6050000 {
> > +		compatible = "renesas,pfc-sh73a0";
> > +		reg = <0xe6050000 0x8000>,
> > +		      <0xe605801c 0x1c>;
> > +		gpio-controller;
> > +		#gpio-cells = <2>;
> > +	};
> > +
> > +Example 2: A GPIO LED node that references a GPIO
> > +
> > +	#include <dt-bindings/gpio/gpio.h>
> > +
> > +	leds {
> > +		compatible = "gpio-leds";
> > +		led1 {
> > +			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
> > +		};
> > +	};
> > +
> > +Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control
> > maps +           for the MMCIF and SCIFA4 devices
> > +
> > +	&pfc {
> > +		pinctrl-0 = <&scifa4_pins>;
> > +		pinctrl-names = "default";
> > +
> > +		mmcif_pins: mmcif {
> > +			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
> > +			renesas,function = "mmc0";
> > +		};
> > +
> > +		scifa4_pins: scifa4 {
> > +			renesas,groups = "scifa4_data", "scifa4_ctrl";
> > +			renesas,function = "scifa4";
> > +		};
> > +	};
> > +
> > +Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
> > +
> > +	&mmcif {
> > +		pinctrl-0 = <&mmcif_pins>;
> > +		pinctrl-names = "default";
> > +
> > +		bus-width = <8>;
> > +		vmmc-supply = <&reg_1p8v>;
> > +		status = "okay";
> > +	};
> > diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
> > index ac45084..f3fc66b 100644
> > --- a/drivers/pinctrl/sh-pfc/core.c
> > +++ b/drivers/pinctrl/sh-pfc/core.c
> > @@ -18,6 +18,8 @@
> >  #include <linux/ioport.h>
> >  #include <linux/kernel.h>
> >  #include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> >  #include <linux/pinctrl/machine.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/slab.h>
> > @@ -348,13 +350,72 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned
> > mark, int pinmux_type) return 0;
> >  }
> > 
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id sh_pfc_of_table[] = {
> > +#ifdef CONFIG_PINCTRL_PFC_R8A73A4
> > +	{
> > +		.compatible = "renesas,pfc-r8a73a4",
> > +		.data = &r8a73a4_pinmux_info,
> > +	},
> > +#endif
> > +#ifdef CONFIG_PINCTRL_PFC_R8A7740
> > +	{
> > +		.compatible = "renesas,pfc-r8a7740",
> > +		.data = &r8a7740_pinmux_info,
> > +	},
> > +#endif
> > +#ifdef CONFIG_PINCTRL_PFC_R8A7778
> > +	{
> > +		.compatible = "renesas,pfc-r8a7778",
> > +		.data = &r8a7778_pinmux_info,
> > +	},
> > +#endif
> > +#ifdef CONFIG_PINCTRL_PFC_R8A7779
> > +	{
> > +		.compatible = "renesas,pfc-r8a7779",
> > +		.data = &r8a7779_pinmux_info,
> > +	},
> > +#endif
> > +#ifdef CONFIG_PINCTRL_PFC_R8A7790
> > +	{
> > +		.compatible = "renesas,pfc-r8a7790",
> > +		.data = &r8a7790_pinmux_info,
> > +	},
> > +#endif
> > +#ifdef CONFIG_PINCTRL_PFC_SH7372
> > +	{
> > +		.compatible = "renesas,pfc-sh7372",
> > +		.data = &sh7372_pinmux_info,
> > +	},
> > +#endif
> > +#ifdef CONFIG_PINCTRL_PFC_SH73A0
> > +	{
> > +		.compatible = "renesas,pfc-sh73a0",
> > +		.data = &sh73a0_pinmux_info,
> > +	},
> > +#endif
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, sh_pfc_of_table);
> > +#endif
> > +
> >  static int sh_pfc_probe(struct platform_device *pdev)
> >  {
> > +	const struct platform_device_id *platid = platform_get_device_id(pdev);
> > +#ifdef CONFIG_OF
> > +	struct device_node *np = pdev->dev.of_node;
> > +#endif
> >  	const struct sh_pfc_soc_info *info;
> >  	struct sh_pfc *pfc;
> >  	int ret;
> > 
> > -	info = (void *)pdev->id_entry->driver_data;
> > +#ifdef CONFIG_OF
> > +	if (np)
> > +		info = of_match_device(sh_pfc_of_table, &pdev->dev)->data;
> > +	else
> > +#endif
> > +		info = platid ? (const void *)platid->driver_data : NULL;
> > +
> >  	if (info == NULL)
> >  		return -ENODEV;
> > 
> > @@ -500,6 +561,7 @@ static struct platform_driver sh_pfc_driver = {
> >  	.driver		= {
> >  		.name	= DRV_NAME,
> >  		.owner	= THIS_MODULE,
> > +		.of_match_table = of_match_ptr(sh_pfc_of_table),
> >  	},
> >  };
> > 
> > diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c
> > b/drivers/pinctrl/sh-pfc/pinctrl.c index 3492ec9..7e32bb8 100644
> > --- a/drivers/pinctrl/sh-pfc/pinctrl.c
> > +++ b/drivers/pinctrl/sh-pfc/pinctrl.c
> > @@ -14,7 +14,9 @@
> >  #include <linux/err.h>
> >  #include <linux/init.h>
> >  #include <linux/module.h>
> > +#include <linux/of.h>
> >  #include <linux/pinctrl/consumer.h>
> > +#include <linux/pinctrl/machine.h>
> >  #include <linux/pinctrl/pinconf.h>
> >  #include <linux/pinctrl/pinconf-generic.h>
> >  #include <linux/pinctrl/pinctrl.h>
> > @@ -72,11 +74,125 @@ static void sh_pfc_pin_dbg_show(struct pinctrl_dev
> > *pctldev, struct seq_file *s, seq_printf(s, "%s", DRV_NAME);
> >  }
> > 
> > +static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node
> > *np, +				    struct pinctrl_map **map,
> > +				    unsigned int *num_maps, unsigned int *index)
> > +{
> > +	struct pinctrl_map *maps = *map;
> > +	unsigned int nmaps = *num_maps;
> > +	unsigned int idx = *index;
> > +	const char *function = NULL;
> > +	struct property *prop;
> > +	const char *group;
> > +	int ret;
> > +
> > +	/* Parse the function and configuration properties. At least a function
> > +	 * or one configuration must be specified.
> > +	 */
> > +	ret = of_property_read_string(np, "renesas,function", &function);
> > +	if (ret < 0 && ret != -EINVAL) {
> > +		dev_err(dev, "Invalid function in DT\n");
> > +		return ret;
> > +	}
> > +
> > +	if (!function) {
> > +		dev_err(dev, "DT node must contain at least one function\n");
> > +		goto done;
> > +	}
> > +
> > +	/* Count the number of groups and reallocate mappings. */
> > +	ret = of_property_count_strings(np, "renesas,groups");
> > +	if (ret < 0 && ret != -EINVAL) {
> > +		dev_err(dev, "Invalid pin groups list in DT\n");
> > +		goto done;
> > +	}
> > +
> > +	if (!ret) {
> > +		dev_err(dev, "No group provided in DT node\n");
> > +		ret = -ENODEV;
> > +		goto done;
> > +	}
> > +
> > +	nmaps += ret;
> > +
> > +	maps = krealloc(maps, sizeof(*maps) * nmaps, GFP_KERNEL);
> > +	if (maps == NULL) {
> > +		ret = -ENOMEM;
> > +		goto done;
> > +	}
> > +
> > +	*map = maps;
> > +	*num_maps = nmaps;
> > +
> > +	/* Iterate over pins and groups and create the mappings. */
> > +	of_property_for_each_string(np, "renesas,groups", prop, group) {
> > +		maps[idx].type = PIN_MAP_TYPE_MUX_GROUP;
> > +		maps[idx].data.mux.group = group;
> > +		maps[idx].data.mux.function = function;
> > +		idx++;
> > +	}
> > +
> > +	ret = 0;
> > +
> > +done:
> > +	*index = idx;
> > +	return ret;
> > +}
> > +
> > +static void sh_pfc_dt_free_map(struct pinctrl_dev *pctldev,
> > +			       struct pinctrl_map *map, unsigned num_maps)
> > +{
> > +	kfree(map);
> > +}
> > +
> > +static int sh_pfc_dt_node_to_map(struct pinctrl_dev *pctldev,
> > +				 struct device_node *np,
> > +				 struct pinctrl_map **map, unsigned *num_maps)
> > +{
> > +	struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
> > +	struct device *dev = pmx->pfc->dev;
> > +	struct device_node *child;
> > +	unsigned int index;
> > +	int ret;
> > +
> > +	*map = NULL;
> > +	*num_maps = 0;
> > +	index = 0;
> > +
> > +	for_each_child_of_node(np, child) {
> > +		ret = sh_pfc_dt_subnode_to_map(dev, child, map, num_maps,
> > +					       &index);
> > +		if (ret < 0)
> > +			goto done;
> > +	}
> > +
> > +	/* If no mapping has been found in child nodes try the config node. */
> > +	if (*num_maps == 0) {
> > +		ret = sh_pfc_dt_subnode_to_map(dev, np, map, num_maps, &index);
> > +		if (ret < 0)
> > +			goto done;
> > +	}
> > +
> > +	if (*num_maps)
> > +		return 0;
> > +
> > +	dev_err(dev, "no mapping found in node %s\n", np->full_name);
> > +	ret = -EINVAL;
> > +
> > +done:
> > +	if (ret < 0)
> > +		sh_pfc_dt_free_map(pctldev, *map, *num_maps);
> > +
> > +	return ret;
> > +}
> > +
> >  static const struct pinctrl_ops sh_pfc_pinctrl_ops = {
> >  	.get_groups_count	= sh_pfc_get_groups_count,
> >  	.get_group_name		= sh_pfc_get_group_name,
> >  	.get_group_pins		= sh_pfc_get_group_pins,
> >  	.pin_dbg_show		= sh_pfc_pin_dbg_show,
> > +	.dt_node_to_map		= sh_pfc_dt_node_to_map,
> > +	.dt_free_map		= sh_pfc_dt_free_map,
> >  };
> > 
> >  static int sh_pfc_get_functions_count(struct pinctrl_dev *pctldev)
> -- 
> Regards,
> 
> Laurent Pinchart
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


More information about the devicetree-discuss mailing list