[PATCH v3 1/4] drivers: usb: phy: add a new driver for usb part of control module

[Felipe Balbi]

On Thu, Jan 24, 2013 at 09:32:46PM -0800, Stephen Warren wrote:
> On 01/24/2013 06:19 PM, Kishon Vijay Abraham I wrote:
> > Added a new driver for the usb part of control module. This has an API
> > to power on the USB2 phy and an API to write to the mailbox depending on
> > whether MUSB has to act in host mode or in device mode.
> > 
> > Writing to control module registers for doing the above task which was
> > previously done in omap glue and in omap-usb2 phy will be removed.
> 
> > diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
> 
> This file seems to be specific to the TI USB PHYs, not all USB PHYs;
> shouldn't it be renamed ti-usb-phy.txt, or even better renamed to match
> the compatible value it documents, giving ti,omap-usb2.txt?

could be, but that can be done as a separate patch. It's not part of
$SUBJECT.

> >  add the address of control module dev conf register until a driver for
> >  control module is added
> >  
> > +Optional properties:
> > + - ctrl_module : phandle of the control module used by PHY driver to power on
> > +   the PHY.
> 
> DT property names generally use - not _ as the word separator.

fair enough, Kishon, can you fix this up ?

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130125/ec99a099/attachment.sig>