[PATCH v5 0/3] ARM: Exynos5250: Enabling dwc3-exynos driver

[Kukjin Kim]

Vivek Gautam wrote:
> 
> This patch-set is in continuation with patch-series:
> [PATCH v4 0/4] Enable ehci, ohci and dwc3 devices on exynos5250
> out of which follwowing patches have been picked up:
> ARM: Exynos5250: Enabling ehci-s5p driver
> ARM: Exynos5250: Enabling ohci-exynos driver
> 
> Based on following patch-set for Samsung's usb PHY enablement:
> [PATCH v4 0/2] ARM: Exynos5250: Enabling samsung usb phy
> 
> and further depends on dwc3-exynos driver patch-set:
> [PATCH 0/2] dwc3: exynos: Device tree fixes
> 
> Changes from v4:
>  - Aligning with the recently merged common clock framework, thereby
>    no place for clock file changes. ;-)
>  - Adding proper binding documentation as per latest bindings changes in
>    dwc3 driver (dwc3/core.c as well as for dwc3-exynos.c change reflected
>    by above patch-set.
>  - Bifurcating the patch to separate our Documentation, arch and dts
> changes.
> 
> Vivek Gautam (3):
>   usb: Add device tree bindings for dwc3-exynos
>   ARM: exynos5250: dts: Enabling dwc3-exynos driver
>   ARM: exynos5: Enable XHCI support on exynos5
> 
>  .../devicetree/bindings/usb/exynos-usb.txt         |   34
> ++++++++++++++++++++
>  arch/arm/boot/dts/exynos5250.dtsi                  |   20 ++++++++++-
>  arch/arm/mach-exynos/Kconfig                       |    1 +
>  3 files changed, 53 insertions(+), 2 deletions(-)
> 
> --
> 1.7.6.5

Applied this series, thanks.

- Kukjin