[PATCH v5 0/3] ARM: Exynos5250: Enabling dwc3-exynos driver

[Vivek Gautam]

Hi Kukjin,


On Fri, Mar 15, 2013 at 1:32 PM, Vivek Gautam <gautam.vivek at samsung.com> wrote:
> This patch-set is in continuation with patch-series:
> [PATCH v4 0/4] Enable ehci, ohci and dwc3 devices on exynos5250
> out of which follwowing patches have been picked up:
> ARM: Exynos5250: Enabling ehci-s5p driver
> ARM: Exynos5250: Enabling ohci-exynos driver
>
> Based on following patch-set for Samsung's usb PHY enablement:
> [PATCH v4 0/2] ARM: Exynos5250: Enabling samsung usb phy
>
> and further depends on dwc3-exynos driver patch-set:
> [PATCH 0/2] dwc3: exynos: Device tree fixes
>
> Changes from v4:
>  - Aligning with the recently merged common clock framework, thereby
>    no place for clock file changes. ;-)
>  - Adding proper binding documentation as per latest bindings changes in
>    dwc3 driver (dwc3/core.c as well as for dwc3-exynos.c change reflected
>    by above patch-set.
>  - Bifurcating the patch to separate our Documentation, arch and dts changes.
>
> Vivek Gautam (3):
>   usb: Add device tree bindings for dwc3-exynos
>   ARM: exynos5250: dts: Enabling dwc3-exynos driver
>   ARM: exynos5: Enable XHCI support on exynos5
>
>  .../devicetree/bindings/usb/exynos-usb.txt         |   34 ++++++++++++++++++++
>  arch/arm/boot/dts/exynos5250.dtsi                  |   20 ++++++++++-
>  arch/arm/mach-exynos/Kconfig                       |    1 +
>  3 files changed, 53 insertions(+), 2 deletions(-)

Waiting for your review on this patch-set. :-)


-- 
Thanks & Regards
Vivek