[PATCH v11 0/3] Add DRM FIMD DT support for Exynos4 DT Machines

[Vikas Sajjan]

Thank you.


On 8 April 2013 12:53, Kukjin Kim <kgene.kim at samsung.com> wrote:

> Vikas Sajjan wrote:
> >
> > This patch series adds support for DRM FIMD DT for Exynos4 DT Machines,
> > specifically for Exynos4412 SoC.
> >
> > changes since v10:
> >       - addressed comments from Sylwester Nawrocki
> > <sylvester.nawrocki at gmail.com>
> >
> > changes since v9:
> >       - dropped the patch "ARM: dts: Add lcd pinctrl node entries for
> > EXYNOS4412 SoC"
> >       as the gpios in the newly added nodes "lcd_en" and "lcd_sync" in
> > this patch
> >       were already PULLed high by existing "lcd_clk" node.
> >       - addressed comments from Sylwester Nawrocki
> > <sylvester.nawrocki at gmail.com>
> >       and Thomas Abraham <thomas.abraham at linaro.org>
> >
> > changes since v8:
> >       - addressed comments to add missing documentation for clock and
> > clock-names
> >       properties as pointed out by Sachin Kamat <sachin.kamat at linaro.org
> >
> >
> > changes since v7:
> >       - rebased to kgene's "for-next"
> >       - Migrated to Common Clock Framework
> >       - removed the patch "ARM: dts: Add FIMD AUXDATA node entry for
> > exynos4 DT",
> >       as migration to Common Clock Framework will NOT need this.
> >       - addressed the comments raised by Sachin Kamat
> > <sachin.kamat at linaro.org>
> >
> > changes since v6:
> >       - addressed comments and added interrupt-names = "fifo", "vsync",
> > "lcd_sys"
> >       in exynos4.dtsi and re-ordered the interrupt numbering to match the
> > order in
> >       interrupt combiner IP as suggested by Sylwester Nawrocki
> > <sylvester.nawrocki at gmail.com>.
> >
> > changes since v5:
> >       - renamed the fimd binding documentation file name as "samsung-
> > fimd.txt",
> >       since it not only talks about exynos display controller but also
> > about
> >       previous samsung display controllers.
> >       - rephrased an abmigious statement about the interrupt combiner in
> > the
> >       fimd binding documentation as pointed out by
> >       Sachin Kamat <sachin.kamat at linaro.org>
> >
> > changes since v4:
> >       - moved the fimd binding documentation to
> > Documentation/devicetree/bindings/video/
> >       as suggested by Sylwester Nawrocki <sylvester.nawrocki at gmail.com>
> >
> >       - added more fimd compatiblity strings in fimd documentation as
> >       discussed at  https://patchwork.kernel.org/patch/2144861/ with
> >       Sylwester Nawrocki <sylvester.nawrocki at gmail.com> and
> >       Tomasz Figa <tomasz.figa at gmail.com>
> >
> >       - modified compatible string for exynos4 fimd as "exynos4210-fimd"
> >       exynos5 fimd as "exynos5250-fimd" to stick to the rule that
> > compatible
> >       value should be named after first specific SoC model in which this
> >       particular IP version was included as discussed at
> >       https://patchwork.kernel.org/patch/2144861/
> >
> >       - documented more about the interrupt combiner and their order as
> >       suggested by Sylwester Nawrocki <sylvester.nawrocki at gmail.com>
> >
> > changes since v3:
> >       - rebased on
> >       http://git.kernel.org/?p=linux/kernel/git/kgene/linux-
> > samsung.git;a=shortlog;h=refs/heads/for-next-next
> >
> > changes since v2:
> >       - added alias to 'fimd at 11c00000' node
> >               (reported by: Rahul Sharma <r.sh.open at gmail.com>)
> >       - removed 'lcd0_data' node as there was already a similar node
> > lcd_data24
> >               (reported by: Jingoo Han <jg1.han at samsung.com>
> >       - replaced spaces with tabs in display-timing node
> >
> > changes since v1:
> >       - added new patch to add FIMD DT binding Documentation
> >       - removed patch enabling SAMSUNG_DEV_BACKLIGHT and SAMSUNG_DEV_PMW
> >       for mach-exynos4 DT
> >       - added 'status' property to fimd DT node
> >
> > Is based on branch kgene's "for-next"
> > https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-
> > samsung.git/log/?h=for-next
> >
> > Vikas Sajjan (3):
> >   ARM: dts: Add FIMD node to exynos4
> >   ARM: dts: Add FIMD node and display timing node to
> >     exynos4412-origen.dts
> >   ARM: dts: Add FIMD DT binding Documentation
> >
> >  .../devicetree/bindings/video/samsung-fimd.txt     |   65
> > ++++++++++++++++++++
> >  arch/arm/boot/dts/exynos4.dtsi                     |   12 ++++
> >  arch/arm/boot/dts/exynos4412-origen.dts            |   21 +++++++
> >  3 files changed, 98 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/video/samsung-
> > fimd.txt
> >
> > --
> > 1.7.9.5
>
> Looks good to me, applied.
>
> Thanks.
>
> - Kukjin
>
>


-- 
Thanks and Regards
 Vikas Sajjan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130408/8a891a03/attachment.html>