[PATCH 4/5] usb: s5p-ehci: Adding phy driver support
Vivek Gautam
gautam.vivek at samsung.com
Tue Oct 9 01:12:27 EST 2012
Adding the transceiver to ehci driver. Keeping the platform data
for continuing the smooth operation for boards which still uses it
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
---
drivers/usb/host/ehci-s5p.c | 62 +++++++++++++++++++++++++++++-------------
1 files changed, 43 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 85b74be..ac22893 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -18,6 +18,7 @@
#include <linux/of_gpio.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/usb-phy.h>
+#include <linux/usb/phy.h>
#define EHCI_INSNREG00(base) (base + 0x90)
#define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25)
@@ -32,6 +33,8 @@ struct s5p_ehci_hcd {
struct device *dev;
struct usb_hcd *hcd;
struct clk *clk;
+ struct usb_phy *phy;
+ struct s5p_ehci_platdata *pdata;
};
static const struct hc_driver s5p_ehci_hc_driver = {
@@ -65,6 +68,26 @@ static const struct hc_driver s5p_ehci_hc_driver = {
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
+static void s5p_ehci_phy_enable(struct s5p_ehci_hcd *s5p_ehci)
+{
+ struct platform_device *pdev = to_platform_device(s5p_ehci->dev);
+
+ if (s5p_ehci->phy)
+ usb_phy_init(s5p_ehci->phy);
+ else if (s5p_ehci->pdata->phy_init)
+ s5p_ehci->pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+}
+
+static void s5p_ehci_phy_disable(struct s5p_ehci_hcd *s5p_ehci)
+{
+ struct platform_device *pdev = to_platform_device(s5p_ehci->dev);
+
+ if (s5p_ehci->phy)
+ usb_phy_shutdown(s5p_ehci->phy);
+ else if (s5p_ehci->pdata->phy_exit)
+ s5p_ehci->pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+}
+
static void s5p_setup_vbus_gpio(struct platform_device *pdev)
{
int err;
@@ -92,15 +115,10 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct resource *res;
+ struct usb_phy *phy;
int irq;
int err;
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "No platform data defined\n");
- return -EINVAL;
- }
-
/*
* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
@@ -118,6 +136,20 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
if (!s5p_ehci)
return -ENOMEM;
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ /* Fallback to Phy transceiver */
+ phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(phy)) {
+ dev_err(&pdev->dev, "no platform data or transceiver defined\n");
+ return -EPROBE_DEFER;
+ } else {
+ s5p_ehci->phy = phy;
+ }
+ } else {
+ s5p_ehci->pdata = pdata;
+ }
+
s5p_ehci->dev = &pdev->dev;
hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev,
@@ -163,8 +195,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
goto fail_io;
}
- if (pdata->phy_init)
- pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+ s5p_ehci_phy_enable(s5p_ehci);
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
@@ -184,6 +215,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
fail_io:
clk_disable(s5p_ehci->clk);
+ s5p_ehci_phy_disable(s5p_ehci);
fail_clk:
usb_put_hcd(hcd);
return err;
@@ -191,14 +223,12 @@ fail_clk:
static int __devexit s5p_ehci_remove(struct platform_device *pdev)
{
- struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = s5p_ehci->hcd;
usb_remove_hcd(hcd);
- if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+ s5p_ehci_phy_disable(s5p_ehci);
clk_disable(s5p_ehci->clk);
@@ -222,14 +252,11 @@ static int s5p_ehci_suspend(struct device *dev)
struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
struct usb_hcd *hcd = s5p_ehci->hcd;
bool do_wakeup = device_may_wakeup(dev);
- struct platform_device *pdev = to_platform_device(dev);
- struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
int rc;
rc = ehci_suspend(hcd, do_wakeup);
- if (pdata && pdata->phy_exit)
- pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+ s5p_ehci_phy_disable(s5p_ehci);
clk_disable(s5p_ehci->clk);
@@ -240,13 +267,10 @@ static int s5p_ehci_resume(struct device *dev)
{
struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
struct usb_hcd *hcd = s5p_ehci->hcd;
- struct platform_device *pdev = to_platform_device(dev);
- struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
clk_enable(s5p_ehci->clk);
- if (pdata && pdata->phy_init)
- pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+ s5p_ehci_phy_enable(s5p_ehci);
/* DMA burst Enable */
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
--
1.7.6.5
More information about the devicetree-discuss
mailing list