[PATCH 3/5] ARM: Exynos5250: Enabling samsung-usbphy driver

Vivek Gautam gautam.vivek at samsung.com
Tue Oct 9 01:12:26 EST 2012


Adding usbphy node for Exynos5250 along with the platform data.

Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
---
 .../devicetree/bindings/usb/samsung-usbphy.txt     |   12 ++++-
 arch/arm/boot/dts/exynos5250.dtsi                  |    5 ++
 arch/arm/mach-exynos/Kconfig                       |    1 +
 arch/arm/mach-exynos/include/mach/map.h            |    1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c             |   10 ++++
 arch/arm/mach-exynos/setup-usb-phy.c               |   45 ++++++++++++++++----
 arch/arm/plat-samsung/include/plat/usb-phy.h       |    3 +-
 7 files changed, 66 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
index 7d54d59..35aaf91 100644
--- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -1,11 +1,19 @@
 * Samsung's usb phy transceiver
 
-The Samsung's phy transceiver is used for controlling usb otg phy for
-s3c-hsotg usb device controller.
+The Samsung's phy transceiver is used for controlling usb phy for
+s3c-hsotg as well as s5p-ehci and exynos-ohci device controllers
+across Samsung SOCs.
 TODO: Adding the PHY binding with controller(s) according to the under 
 developement generic PHY driver.
 
+Exynos4210:
 Required properties:
 - compatible : should be "samsung,exynos4210-usbphy"
 - reg : base physical address of the phy registers and length of memory mapped
 	region.
+
+Exynos5250:
+Required properties:
+- compatible : should be "samsung,exynos5250-usbphy"
+- reg : base physical address of the phy registers and length of memory mapped
+	region.
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dddfd6e..82bf042 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -218,6 +218,11 @@
 		#size-cells = <0>;
 	};
 
+	usbphy {
+		compatible = "samsung,exynos5250-usbphy";
+		reg = <0x12130000 0x100>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4372075..e8e3d7b 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -422,6 +422,7 @@ config MACH_EXYNOS5_DT
 	select SOC_EXYNOS5250
 	select USE_OF
 	select ARM_AMBA
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
 	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 9694424..7f5eb03 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -195,6 +195,7 @@
 #define EXYNOS4_PA_EHCI			0x12580000
 #define EXYNOS4_PA_OHCI			0x12590000
 #define EXYNOS4_PA_HSPHY		0x125B0000
+#define EXYNOS5_PA_HSPHY		0x12130000
 #define EXYNOS4_PA_MFC			0x13400000
 
 #define EXYNOS4_PA_UART			0x13800000
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index db1cd8e..6d9528a 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,6 +11,7 @@
 
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/samsung-usbphy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -18,9 +19,16 @@
 
 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
+#include <plat/usb-phy.h>
 
 #include "common.h"
 
+static struct samsung_usbphy_data exynos5_usbphy_pdata = {
+	.pmu_isolation = s5p_usb_phy_pmu_isolation,
+	.phy_cfg_sel = s5p_usb_phy_cfg_sel,
+	.type = TYPE_HOST,
+};
+
 /*
  * The following lookup table is used to override device names when devices
  * are registered from device tree. This is temporarily added to enable
@@ -72,6 +80,8 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos-gsc.2", NULL),
 	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
 				"exynos-gsc.3", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-usbphy", EXYNOS5_PA_HSPHY,
+					"s3c-usbphy", &exynos5_usbphy_pdata),
 	{},
 };
 
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 1c62d20..039d246 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -14,10 +14,14 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/samsung-usbphy.h>
 #include <mach/regs-pmu.h>
 #include <mach/regs-usb-phy.h>
 #include <plat/cpu.h>
 #include <plat/usb-phy.h>
+#include <plat/map-base.h>
+
+#define EXYNOS5_USB_CFG			(S3C_VA_SYS + (0x230))
 
 static atomic_t host_usage;
 
@@ -222,15 +226,40 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
 	return -EINVAL;
 }
 
-void s5p_usb_phy_pmu_isolation(int on)
+void s5p_usb_phy_pmu_isolation(int on, int type)
 {
-	if (on) {
-		writel(readl(S5P_USBDEVICE_PHY_CONTROL)
-			& ~S5P_USBDEVICE_PHY_ENABLE,
-				S5P_USBDEVICE_PHY_CONTROL);
+	if (type == TYPE_HOST) {
+		if (on) {
+			writel(readl(S5P_USBHOST_PHY_CONTROL)
+				& ~S5P_USBHOST_PHY_ENABLE,
+					S5P_USBHOST_PHY_CONTROL);
+		} else {
+			writel(readl(S5P_USBHOST_PHY_CONTROL)
+				| S5P_USBHOST_PHY_ENABLE,
+					S5P_USBHOST_PHY_CONTROL);
+		}
 	} else {
-		writel(readl(S5P_USBDEVICE_PHY_CONTROL)
-			| S5P_USBDEVICE_PHY_ENABLE,
-				S5P_USBDEVICE_PHY_CONTROL);
+		if (on) {
+			writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+				& ~S5P_USBDEVICE_PHY_ENABLE,
+					S5P_USBDEVICE_PHY_CONTROL);
+		} else {
+			writel(readl(S5P_USBDEVICE_PHY_CONTROL)
+				| S5P_USBDEVICE_PHY_ENABLE,
+					S5P_USBDEVICE_PHY_CONTROL);
+		}
 	}
 }
+
+/* Switch between HOST or OTG link from PHY_CFG */
+void s5p_usb_phy_cfg_sel(struct device *dev, int type)
+{
+	u32 is_host;
+
+	is_host = readl(EXYNOS5_USB_CFG);
+	writel(type, EXYNOS5_USB_CFG);
+
+	if (is_host != type)
+		dev_dbg(dev, "Changed USB MUX from %s to %s",
+			is_host ? "Host" : "Device", type ? "Host" : "Device");
+}
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h
index 165ffe7..a57b8bb 100644
--- a/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ b/arch/arm/plat-samsung/include/plat/usb-phy.h
@@ -18,6 +18,7 @@ enum s5p_usb_phy_type {
 
 extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
 extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
-extern void s5p_usb_phy_pmu_isolation(int on);
+extern void s5p_usb_phy_pmu_isolation(int on, int type);
+extern void s5p_usb_phy_cfg_sel(struct device *dev, int type);
 
 #endif /* __PLAT_SAMSUNG_USB_PHY_H */
-- 
1.7.6.5



More information about the devicetree-discuss mailing list