[RESEND PATCH 05/11] ARM: OMAP: USB: Host: usb host Device tree node Adaptation

[Munegowda, Keshava]

________________________________________
From: Tony Lindgren [tony at atomide.com]
Sent: Wednesday, October 31, 2012 11:59 PM
To: Munegowda, Keshava
Cc: linux-omap at vger.kernel.org; devicetree-discuss at lists.ozlabs.org; linux-doc at vger.kernel.org; linux-usb at vger.kernel.org; Balbi, Felipe; sameo at linux.intel.com; Cousson, Benoit
Subject: Re: [RESEND PATCH 05/11] ARM: OMAP: USB: Host: usb host Device tree node Adaptation

* Keshava Munegowda <keshava_mgowda at ti.com> [121031 07:29]:
> The USB2 Host device node is extracted and used in the probe
> of the driver to initialize the usb ports and controller. The
> platform specific initialization is also performed.
>
> Signed-off-by: Keshava Munegowda <keshava_mgowda at ti.com>
> ---
>  arch/arm/mach-omap2/usb-host.c         |    2 -
>  drivers/mfd/omap-usb-host.c            |  163 +++++++++++++++++++++++---------
>  include/linux/platform_data/usb-omap.h |   19 +++-
>  3 files changed, 133 insertions(+), 51 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
> index d1dbe12..239c175 100644
> --- a/arch/arm/mach-omap2/usb-host.c
> +++ b/arch/arm/mach-omap2/usb-host.c
> @@ -502,8 +502,6 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
>       }
>       ehci_data.phy_reset = pdata->phy_reset;
>       ohci_data.es2_compatibility = pdata->es2_compatibility;
> -     usbhs_data.ehci_data = &ehci_data;
> -     usbhs_data.ohci_data = &ohci_data;
>
>       if (cpu_is_omap34xx()) {
>               setup_ehci_io_mux(pdata->port_mode);

Just checking.. Have you tested that these patches also
still work without device tree?

Regards,

Tony


No ! with out device tree enabled , these patches does not work.
do I need to make a code such way that it works with and without
device tree..?

regards
keshava