[RESEND PATCH 05/11] ARM: OMAP: USB: Host: usb host Device tree node Adaptation

[Felipe Balbi]

On Thu, Nov 01, 2012 at 09:19:48AM +0100, Munegowda, Keshava wrote:
> 
> ________________________________________
> From: Tony Lindgren [tony at atomide.com]
> Sent: Wednesday, October 31, 2012 11:59 PM
> To: Munegowda, Keshava
> Cc: linux-omap at vger.kernel.org; devicetree-discuss at lists.ozlabs.org; linux-doc at vger.kernel.org; linux-usb at vger.kernel.org; Balbi, Felipe; sameo at linux.intel.com; Cousson, Benoit
> Subject: Re: [RESEND PATCH 05/11] ARM: OMAP: USB: Host: usb host Device tree node Adaptation
> 
> * Keshava Munegowda <keshava_mgowda at ti.com> [121031 07:29]:
> > The USB2 Host device node is extracted and used in the probe
> > of the driver to initialize the usb ports and controller. The
> > platform specific initialization is also performed.
> >
> > Signed-off-by: Keshava Munegowda <keshava_mgowda at ti.com>
> > ---
> >  arch/arm/mach-omap2/usb-host.c         |    2 -
> >  drivers/mfd/omap-usb-host.c            |  163 +++++++++++++++++++++++---------
> >  include/linux/platform_data/usb-omap.h |   19 +++-
> >  3 files changed, 133 insertions(+), 51 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
> > index d1dbe12..239c175 100644
> > --- a/arch/arm/mach-omap2/usb-host.c
> > +++ b/arch/arm/mach-omap2/usb-host.c
> > @@ -502,8 +502,6 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
> >       }
> >       ehci_data.phy_reset = pdata->phy_reset;
> >       ohci_data.es2_compatibility = pdata->es2_compatibility;
> > -     usbhs_data.ehci_data = &ehci_data;
> > -     usbhs_data.ohci_data = &ohci_data;
> >
> >       if (cpu_is_omap34xx()) {
> >               setup_ehci_io_mux(pdata->port_mode);
> 
> Just checking.. Have you tested that these patches also
> still work without device tree?
> 
> Regards,
> 
> Tony
> 
> 
> No ! with out device tree enabled , these patches does not work.
> do I need to make a code such way that it works with and without
> device tree..?

yes. OMAP3/4 still have lots of legacy platform_data-only board support
;-)

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20121101/e1c3b13a/attachment.sig>