[PATCH V3 1/2] of: Add generic device tree DMA helpers

Arnd Bergmann arnd at arndb.de
Tue May 22 04:18:45 EST 2012


On Monday 21 May 2012, Stephen Warren wrote:
> > 
> > The point with the direction was that it covers most cases and makes
> > them rather simple, while for the rare case where you need more than
> > two channels, you just use the otherwise optional named interface
> > rather than the numbered one. My feeling is that this also makes a
> > lot of sense at the driver API level: most dirvers just ask for the
> > read and write channels using a very simple interface, and those drivers
> > that have more than two will want to name them anyway.
> 
> How are you thinking of representing the direction in DT - as part of
> the DMA request specifier, so in a DMAC-specific way?
> 
> If so, that seems a little odd; you have to request a DMA channel for
> "TX", but then end up having the common code check all the entries in
> the dmas property since it can't know which are TX, and then have the
> wrong ones almost accidentally fail, since the DMAC will then determine
> that it can't support TX on the RX DMA request IDs.

I think the direction must be encoded in a way that does not depend on
the binding for the specific controller. There are two ways I can see
how we might do it:

1. have separate property names for tx and rx channels, and probably
   one for combined rx/tx channels
2. define the second cell in each channel specifier to be the direction
   in a predefined format, followed by the other (controller specific)
   attributes, if any.
 

	Arnd



More information about the devicetree-discuss mailing list