[PATCH 1/4] dt: fsl-imx-esdhc.txt: Fix gpio number assignment

Sascha Hauer s.hauer at pengutronix.de
Mon Jun 11 16:50:11 EST 2012


On Sun, Jun 10, 2012 at 11:11:13PM -0500, Rob Herring wrote:
> On 06/10/2012 09:03 PM, Fabio Estevam wrote:
> > On Sun, Jun 10, 2012 at 8:11 PM, Rob Herring <robherring2 at gmail.com> wrote:
> >> On 06/10/2012 12:24 PM, Fabio Estevam wrote:
> >>> From: Fabio Estevam <fabio.estevam at freescale.com>
> >>>
> >>> Fix gpio number assignment, so that it can match the number stated in the comment.
> >>>
> >>> Cc:
> >>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> >>> ---
> >>>  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |    4 ++--
> >>>  1 files changed, 2 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> >>> index c7e404b..fea541e 100644
> >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> >>> @@ -29,6 +29,6 @@ esdhc at 70008000 {
> >>>       compatible = "fsl,imx51-esdhc";
> >>>       reg = <0x70008000 0x4000>;
> >>>       interrupts = <2>;
> >>> -     cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
> >>> -     wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
> >>> +     cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
> >>> +     wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
> >>
> >> Are you sure all these aren't just DT is 0 based and the chip is 1 based
> >> numbering?
> > 
> > We start counting gpio number from 0 in i.mx, so the DT number and the
> > GPIO number should match.
> 
> I'm talking about bank numbers, not gpio numbers:
> 
> /* There's a off-by-one betweem the gpio bank number and the gpiochip */
> /* range e.g. GPIO_1_5 is gpio 5 under linux */
> #define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))

Traditionally I started counting at 0 no matter what the datasheet told.
Now we go to match the numbering with the datasheets, which of course
can be confusing while transitioning this.
Fabios patch is correct, there is no gpio0 in the devicetree.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


More information about the devicetree-discuss mailing list