[PATCH 1/4] dt: fsl-imx-esdhc.txt: Fix gpio number assignment

[Rob Herring]

On 06/10/2012 09:03 PM, Fabio Estevam wrote:
> On Sun, Jun 10, 2012 at 8:11 PM, Rob Herring <robherring2 at gmail.com> wrote:
>> On 06/10/2012 12:24 PM, Fabio Estevam wrote:
>>> From: Fabio Estevam <fabio.estevam at freescale.com>
>>>
>>> Fix gpio number assignment, so that it can match the number stated in the comment.
>>>
>>> Cc:
>>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>>> ---
>>>  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |    4 ++--
>>>  1 files changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
>>> index c7e404b..fea541e 100644
>>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
>>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
>>> @@ -29,6 +29,6 @@ esdhc at 70008000 {
>>>       compatible = "fsl,imx51-esdhc";
>>>       reg = <0x70008000 0x4000>;
>>>       interrupts = <2>;
>>> -     cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
>>> -     wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
>>> +     cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
>>> +     wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
>>
>> Are you sure all these aren't just DT is 0 based and the chip is 1 based
>> numbering?
> 
> We start counting gpio number from 0 in i.mx, so the DT number and the
> GPIO number should match.

I'm talking about bank numbers, not gpio numbers:

/* There's a off-by-one betweem the gpio bank number and the gpiochip */
/* range e.g. GPIO_1_5 is gpio 5 under linux */
#define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))


Rob