[PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data

[Koen Kooi]

Op 26 jul. 2012, om 11:03 heeft "AnilKumar, Chimata" <anilkumar at ti.com> het volgende geschreven:

> On Thu, Jul 26, 2012 at 14:16:33, Koen Kooi wrote:
>> 
>> Op 25 jul. 2012, om 14:23 heeft AnilKumar Ch <anilkumar at ti.com> het volgende geschreven:
>> 
>>> Add Bosch D_CAN controller device tree data to AM33XX dtsi file
>>> by adding d_can device node with all the necessary parameters.
>>> 
>>> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
>>> ---
>>> arch/arm/boot/dts/am33xx.dtsi |    5 +++++
>>> 1 file changed, 5 insertions(+)
>>> 
>>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>>> index 9b974dc..2db2ffb 100644
>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>> @@ -163,5 +163,10 @@
>>> 			#size-cells = <0>;
>>> 			ti,hwmods = "i2c3";
>>> 		};
>>> +
>>> +		dcan1: d_can at 481D0000 {
>>> +			compatible = "bosch,d_can";
>>> +			ti,hwmods = "d_can1";
>>> +		};
>>> 	};
>> 
>> I scanned the linux-networking mailinglist and l-o-ml, but I can't find the patchset that actually adds the d_can drivers, could you provide a link to that? I have 2 different CAN capes I'd like to test on beaglebone.
>> 
> 
> You can find it from linux-next or net-next trees, D_CAN support is added
> to C_CAN driver.
> 
> http://git.kernel.org/?p=linux/kernel/git/davem/net-next.git;
> a=commitdiff;h=69927fccd96b15bd228bb82d356a7a2a0cfaeefb

Thanks! I'll try merging net-next into l-o master and see if I can get the CAN boards to work.

regards,

Koen