[PATCH v2 2/2] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM

AnilKumar Ch anilkumar at ti.com
Wed Jul 25 22:23:32 EST 2012


Add D_CAN1 pinctrl node to am3358_pinmux master node to export
D_CAN functionality on AM335x EVM according to pinctrl-single
driver.

Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e4e1ccb..7f0fd6c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -46,3 +46,16 @@
 	regulator-boot-on;
 	regulator-always-on;
 };
+
+&am3358_pinmux {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&d_can1_pins>;
+
+	d_can1_pins: pinmux_d_can_pins {
+		pinctrl-single,pins = <
+			0x168 0x2	/* uart0_ctsn.d_can1_tx, OUTPUT | MODE2 */
+			0x16C 0x32	/* uart0_rtsn.d_can1_rx, INPUT_PULLUP | MODE2 */
+		>;
+	};
+};
-- 
1.7.9.5



More information about the devicetree-discuss mailing list