[PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data

AnilKumar, Chimata anilkumar at ti.com
Thu Jul 26 19:03:27 EST 2012


On Thu, Jul 26, 2012 at 14:16:33, Koen Kooi wrote:
> 
> Op 25 jul. 2012, om 14:23 heeft AnilKumar Ch <anilkumar at ti.com> het volgende geschreven:
> 
> > Add Bosch D_CAN controller device tree data to AM33XX dtsi file
> > by adding d_can device node with all the necessary parameters.
> > 
> > Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
> > ---
> > arch/arm/boot/dts/am33xx.dtsi |    5 +++++
> > 1 file changed, 5 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> > index 9b974dc..2db2ffb 100644
> > --- a/arch/arm/boot/dts/am33xx.dtsi
> > +++ b/arch/arm/boot/dts/am33xx.dtsi
> > @@ -163,5 +163,10 @@
> > 			#size-cells = <0>;
> > 			ti,hwmods = "i2c3";
> > 		};
> > +
> > +		dcan1: d_can at 481D0000 {
> > +			compatible = "bosch,d_can";
> > +			ti,hwmods = "d_can1";
> > +		};
> > 	};
> 
> I scanned the linux-networking mailinglist and l-o-ml, but I can't find the patchset that actually adds the d_can drivers, could you provide a link to that? I have 2 different CAN capes I'd like to test on beaglebone.
> 

You can find it from linux-next or net-next trees, D_CAN support is added
to C_CAN driver.

http://git.kernel.org/?p=linux/kernel/git/davem/net-next.git;
a=commitdiff;h=69927fccd96b15bd228bb82d356a7a2a0cfaeefb

Regards
AnilKumar


More information about the devicetree-discuss mailing list