[PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data

[Koen Kooi]

Op 25 jul. 2012, om 14:23 heeft AnilKumar Ch <anilkumar at ti.com> het volgende geschreven:

> Add Bosch D_CAN controller device tree data to AM33XX dtsi file
> by adding d_can device node with all the necessary parameters.
> 
> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
> ---
> arch/arm/boot/dts/am33xx.dtsi |    5 +++++
> 1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 9b974dc..2db2ffb 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -163,5 +163,10 @@
> 			#size-cells = <0>;
> 			ti,hwmods = "i2c3";
> 		};
> +
> +		dcan1: d_can at 481D0000 {
> +			compatible = "bosch,d_can";
> +			ti,hwmods = "d_can1";
> +		};
> 	};

I scanned the linux-networking mailinglist and l-o-ml, but I can't find the patchset that actually adds the d_can drivers, could you provide a link to that? I have 2 different CAN capes I'd like to test on beaglebone.

regards,

Koen