[PATCH v3 4/4] ARM: Exynos4: Add device tree support for gpio wakeup interrupt controller

Rob Herring robherring2 at gmail.com
Thu Feb 23 04:38:16 EST 2012


On 02/22/2012 06:14 AM, Thomas Abraham wrote:
> Add device tree support for gpio wakeup source interrupt controller
> on Exynos4.
> 
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>

For the series:

Acked-by: Rob Herring <rob.herring at calxeda.com>

Rob

> ---
>  .../bindings/arm/samsung/wakeup-eint.txt           |   37 +++++++++++++++++
>  arch/arm/mach-exynos/common.c                      |   43 +++++++++++++------
>  2 files changed, 66 insertions(+), 14 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt b/Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt
> new file mode 100644
> index 0000000..ac9db41
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt
> @@ -0,0 +1,37 @@
> +* Samsung Exynos4 GPIO Wakeup Interrupt Source Controller
> +
> +Samsung Exynos4 processor supports 32 external wakeup interrupt sources. First
> +16 of these interrupts are directly connected to GIC and the rest 16 of the
> +interrupts are grouped together to deliver a single interrupt to GIC.
> +
> +Required properties:
> +
> +- compatible: should be "samsung,exynos4210-wakeup-eint".
> +- interrupt-controller: Identifies the node as an interrupt controller.
> +- interrupt-cells: Specifies the number of cells required to specify the
> +  interrupt source number. The value of should be <2>. The first cell
> +  represents the wakeup interrupt source number and the second cell
> +  should be zero (currently unused).
> +- interrupts: List of interrupts generated by the gpio wakeup interrupt
> +    controller which are connected to a parent interrupt controller. The
> +    format of the interrupt specifier depends on the interrupt parent
> +    controller.
> +
> +Optional properties:
> +- interrupt-parent: phandle of the parent interrupt controller, required if
> +  not inheriting the interrupt parent from the parent node.
> +
> +Example:
> +
> +	The following example is from the Exynos4210 dtsi file.
> +
> +	wakeup_eint: interrupt-controller-wakeup-eint {
> +		compatible = "samsung,exynos4210-wakeup-eint";
> +		#interrupt-cells = <2>;
> +		interrupt-controller;
> +		interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
> +				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
> +				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
> +				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
> +				<0 32 0>;
> +	};
> diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
> index 888e703..615168e 100644
> --- a/arch/arm/mach-exynos/common.c
> +++ b/arch/arm/mach-exynos/common.c
> @@ -49,6 +49,9 @@
>  
>  #include "common.h"
>  
> +static int exynos4_init_irq_eint(struct device_node *np,
> +					struct device_node *parent);
> +
>  static const char name_exynos4210[] = "EXYNOS4210";
>  static const char name_exynos4212[] = "EXYNOS4212";
>  static const char name_exynos4412[] = "EXYNOS4412";
> @@ -81,8 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = {
>  	},
>  };
>  
> -static int exynos4_init_irq_eint(void);
> -
>  /* Initial IO mappings */
>  
>  static struct map_desc exynos_iodesc[] __initdata = {
> @@ -461,6 +462,8 @@ static const struct of_device_id exynos4_dt_irq_match[] = {
>  	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
>  	{ .compatible = "samsung,exynos4210-combiner",
>  			.data = combiner_of_init, },
> +	{ .compatible = "samsung,exynos4210-wakeup-eint",
> +		.data = exynos4_init_irq_eint, },
>  	{},
>  };
>  #endif
> @@ -478,8 +481,10 @@ void __init exynos4_init_irq(void)
>  		of_irq_init(exynos4_dt_irq_match);
>  #endif
>  
> -	if (!of_have_populated_dt())
> +	if (!of_have_populated_dt()) {
>  		combiner_init(S5P_VA_COMBINER_BASE, NULL);
> +		exynos4_init_irq_eint(NULL, NULL);
> +	}
>  
>  	/*
>  	 * The parameters of s5p_init_irq() are for VIC init.
> @@ -487,7 +492,6 @@ void __init exynos4_init_irq(void)
>  	 * uses GIC instead of VIC.
>  	 */
>  	s5p_init_irq(NULL, 0);
> -	exynos4_init_irq_eint();
>  }
>  
>  struct bus_type exynos4_subsys = {
> @@ -745,9 +749,20 @@ static struct irq_domain_ops exynos4_eint_irq_domain_ops = {
>  	.map = exynos4_eint_irq_domain_map,
>  };
>  
> -static int __init exynos4_init_irq_eint(void)
> +static int __init exynos4_eint_to_irq(struct device_node *np, int hwirq)
> +{
> +#ifdef CONFIG_OF
> +	return np ? irq_of_parse_and_map(np, hwirq) :
> +			exynos4_irq_eint_to_gic_irq(hwirq);
> +#else
> +	return exynos4_irq_eint_to_gic_irq(hwirq);
> +#endif
> +}
> +
> +static int __init exynos4_init_irq_eint(struct device_node *np,
> +						struct device_node *parent)
>  {
> -	int eint, irq_base;
> +	int eint, irq_base, irq;
>  	struct irq_domain *irq_domain;
>  
>  	irq_base = irq_alloc_descs(IRQ_EINT(0), 1, EXYNOS4_EINT_NR, 0);
> @@ -757,7 +772,7 @@ static int __init exynos4_init_irq_eint(void)
>  			"Continuing with %d as linux irq base\n", irq_base);
>  	}
>  
> -	irq_domain = irq_domain_add_legacy(NULL, EXYNOS4_EINT_NR, irq_base, 0,
> +	irq_domain = irq_domain_add_legacy(np, EXYNOS4_EINT_NR, irq_base, 0,
>  					&exynos4_eint_irq_domain_ops, NULL);
>  	if (WARN_ON(!irq_domain)) {
>  		pr_warning("exynos4_init_irq_eint: irq domain init failed\n");
> @@ -765,16 +780,16 @@ static int __init exynos4_init_irq_eint(void)
>  	}
>  
>  	eint_data.irq_domain = irq_domain;
> -	eint_data.gic_irq_base = exynos4_irq_eint_to_gic_irq(0);
> +	eint_data.gic_irq_base = exynos4_eint_to_irq(np, 0);
>  
>  	for (eint = 0 ; eint <= 15 ; eint++) {
> -		irq_set_handler_data(exynos4_irq_eint_to_gic_irq(eint),
> -					&eint_data);
> -		irq_set_chained_handler(exynos4_irq_eint_to_gic_irq(eint),
> -					exynos4_irq_eint0_15);
> +		irq = exynos4_eint_to_irq(np, eint);
> +		irq_set_handler_data(irq, &eint_data);
> +		irq_set_chained_handler(irq, exynos4_irq_eint0_15);
>  	}
>  
> -	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
> -	irq_set_handler_data(IRQ_EINT16_31, &eint_data);
> +	irq = exynos4_eint_to_irq(np, eint);
> +	irq_set_chained_handler(irq, exynos4_irq_demux_eint16_31);
> +	irq_set_handler_data(irq, &eint_data);
>  	return 0;
>  }



More information about the devicetree-discuss mailing list