[PATCH v3 4/4] ARM: Exynos4: Add device tree support for gpio wakeup interrupt controller

Thomas Abraham thomas.abraham at linaro.org
Wed Feb 22 23:14:18 EST 2012


Add device tree support for gpio wakeup source interrupt controller
on Exynos4.

Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
 .../bindings/arm/samsung/wakeup-eint.txt           |   37 +++++++++++++++++
 arch/arm/mach-exynos/common.c                      |   43 +++++++++++++------
 2 files changed, 66 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt

diff --git a/Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt b/Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt
new file mode 100644
index 0000000..ac9db41
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/wakeup-eint.txt
@@ -0,0 +1,37 @@
+* Samsung Exynos4 GPIO Wakeup Interrupt Source Controller
+
+Samsung Exynos4 processor supports 32 external wakeup interrupt sources. First
+16 of these interrupts are directly connected to GIC and the rest 16 of the
+interrupts are grouped together to deliver a single interrupt to GIC.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-wakeup-eint".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-cells: Specifies the number of cells required to specify the
+  interrupt source number. The value of should be <2>. The first cell
+  represents the wakeup interrupt source number and the second cell
+  should be zero (currently unused).
+- interrupts: List of interrupts generated by the gpio wakeup interrupt
+    controller which are connected to a parent interrupt controller. The
+    format of the interrupt specifier depends on the interrupt parent
+    controller.
+
+Optional properties:
+- interrupt-parent: phandle of the parent interrupt controller, required if
+  not inheriting the interrupt parent from the parent node.
+
+Example:
+
+	The following example is from the Exynos4210 dtsi file.
+
+	wakeup_eint: interrupt-controller-wakeup-eint {
+		compatible = "samsung,exynos4210-wakeup-eint";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+				<0 32 0>;
+	};
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 888e703..615168e 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -49,6 +49,9 @@
 
 #include "common.h"
 
+static int exynos4_init_irq_eint(struct device_node *np,
+					struct device_node *parent);
+
 static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
 static const char name_exynos4412[] = "EXYNOS4412";
@@ -81,8 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 	},
 };
 
-static int exynos4_init_irq_eint(void);
-
 /* Initial IO mappings */
 
 static struct map_desc exynos_iodesc[] __initdata = {
@@ -461,6 +462,8 @@ static const struct of_device_id exynos4_dt_irq_match[] = {
 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
 	{ .compatible = "samsung,exynos4210-combiner",
 			.data = combiner_of_init, },
+	{ .compatible = "samsung,exynos4210-wakeup-eint",
+		.data = exynos4_init_irq_eint, },
 	{},
 };
 #endif
@@ -478,8 +481,10 @@ void __init exynos4_init_irq(void)
 		of_irq_init(exynos4_dt_irq_match);
 #endif
 
-	if (!of_have_populated_dt())
+	if (!of_have_populated_dt()) {
 		combiner_init(S5P_VA_COMBINER_BASE, NULL);
+		exynos4_init_irq_eint(NULL, NULL);
+	}
 
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
@@ -487,7 +492,6 @@ void __init exynos4_init_irq(void)
 	 * uses GIC instead of VIC.
 	 */
 	s5p_init_irq(NULL, 0);
-	exynos4_init_irq_eint();
 }
 
 struct bus_type exynos4_subsys = {
@@ -745,9 +749,20 @@ static struct irq_domain_ops exynos4_eint_irq_domain_ops = {
 	.map = exynos4_eint_irq_domain_map,
 };
 
-static int __init exynos4_init_irq_eint(void)
+static int __init exynos4_eint_to_irq(struct device_node *np, int hwirq)
+{
+#ifdef CONFIG_OF
+	return np ? irq_of_parse_and_map(np, hwirq) :
+			exynos4_irq_eint_to_gic_irq(hwirq);
+#else
+	return exynos4_irq_eint_to_gic_irq(hwirq);
+#endif
+}
+
+static int __init exynos4_init_irq_eint(struct device_node *np,
+						struct device_node *parent)
 {
-	int eint, irq_base;
+	int eint, irq_base, irq;
 	struct irq_domain *irq_domain;
 
 	irq_base = irq_alloc_descs(IRQ_EINT(0), 1, EXYNOS4_EINT_NR, 0);
@@ -757,7 +772,7 @@ static int __init exynos4_init_irq_eint(void)
 			"Continuing with %d as linux irq base\n", irq_base);
 	}
 
-	irq_domain = irq_domain_add_legacy(NULL, EXYNOS4_EINT_NR, irq_base, 0,
+	irq_domain = irq_domain_add_legacy(np, EXYNOS4_EINT_NR, irq_base, 0,
 					&exynos4_eint_irq_domain_ops, NULL);
 	if (WARN_ON(!irq_domain)) {
 		pr_warning("exynos4_init_irq_eint: irq domain init failed\n");
@@ -765,16 +780,16 @@ static int __init exynos4_init_irq_eint(void)
 	}
 
 	eint_data.irq_domain = irq_domain;
-	eint_data.gic_irq_base = exynos4_irq_eint_to_gic_irq(0);
+	eint_data.gic_irq_base = exynos4_eint_to_irq(np, 0);
 
 	for (eint = 0 ; eint <= 15 ; eint++) {
-		irq_set_handler_data(exynos4_irq_eint_to_gic_irq(eint),
-					&eint_data);
-		irq_set_chained_handler(exynos4_irq_eint_to_gic_irq(eint),
-					exynos4_irq_eint0_15);
+		irq = exynos4_eint_to_irq(np, eint);
+		irq_set_handler_data(irq, &eint_data);
+		irq_set_chained_handler(irq, exynos4_irq_eint0_15);
 	}
 
-	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-	irq_set_handler_data(IRQ_EINT16_31, &eint_data);
+	irq = exynos4_eint_to_irq(np, eint);
+	irq_set_chained_handler(irq, exynos4_irq_demux_eint16_31);
+	irq_set_handler_data(irq, &eint_data);
 	return 0;
 }
-- 
1.6.6.rc2



More information about the devicetree-discuss mailing list