[PATCH v5 2/4] usb: phy: samsung: Add host phy support to samsung-phy driver
Vivek Gautam
gautam.vivek at samsung.com
Wed Dec 19 01:43:04 EST 2012
This patch adds host phy support to samsung-usbphy.c and
further adds support for samsung's exynos5250 usb-phy.
Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
---
.../devicetree/bindings/usb/samsung-usbphy.txt | 25 +-
drivers/usb/phy/Kconfig | 2 +-
drivers/usb/phy/samsung-usbphy.c | 465 ++++++++++++++++++--
include/linux/usb/samsung_usb_phy.h | 13 +
4 files changed, 454 insertions(+), 51 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
index a7b28b2..2ec5400 100644
--- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -1,23 +1,38 @@
* Samsung's usb phy transceiver
-The Samsung's phy transceiver is used for controlling usb otg phy for
-s3c-hsotg usb device controller.
+The Samsung's phy transceiver is used for controlling usb phy for
+s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers
+across Samsung SOCs.
TODO: Adding the PHY binding with controller(s) according to the under
developement generic PHY driver.
Required properties:
+
+Exynos4210:
- compatible : should be "samsung,exynos4210-usbphy"
- reg : base physical address of the phy registers and length of memory mapped
region.
+Exynos5250:
+- compatible : should be "samsung,exynos5250-usbphy"
+- reg : base physical address of the phy registers and length of memory mapped
+ region.
+
Optional properties:
- samsung,usb-phyhandle : should point to usb-phyhandle sub-node which provides
binding data to enable/disable device PHY handled by
- PMU register.
+ PMU register; or to configure usb2.0 phy handled by
+ SYSREG.
Required properties:
- compatible : should be "samsung,usbdev-phyctrl" for
- DEVICE type phy.
+ DEVICE type phy; or
+ should be "samsung,usbhost-phyctrl" for
+ HOST type phy; or
+ should be "samsung,usb-phycfg" for
+ USB2.0 PHY_CFG.
- samsung,phyhandle-reg: base physical address of
- PHY_CONTROL register in PMU.
+ PHY_CONTROL register in PMU;
+ or USB2.0 PHY_CFG register
+ in SYSREG.
- samsung,enable-mask : should be '1'
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 17ad743..13c0eaf 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -47,7 +47,7 @@ config USB_RCAR_PHY
config SAMSUNG_USBPHY
bool "Samsung USB PHY controller Driver"
- depends on USB_S3C_HSOTG
+ depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
select USB_OTG_UTILS
help
Enable this to support Samsung USB phy controller for samsung
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
index 4ceabe3..621348a 100644
--- a/drivers/usb/phy/samsung-usbphy.c
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -5,7 +5,8 @@
*
* Author: Praveen Paneri <p.paneri at samsung.com>
*
- * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
+ * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
+ * OHCI-EXYNOS controllers.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -24,7 +25,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/usb/otg.h>
+#include <linux/usb/samsung_usb_phy.h>
#include <linux/platform_data/samsung-usbphy.h>
/* Register definitions */
@@ -56,6 +57,103 @@
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
+/* EXYNOS5 */
+#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
+
+#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
+
+#define HOST_CTRL0_REFCLKSEL_MASK (0x3)
+#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
+#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
+#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
+
+#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
+#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
+#define HOST_CTRL0_FSEL_CLKSEL_50M (0x7)
+#define HOST_CTRL0_FSEL_CLKSEL_24M (0x5)
+#define HOST_CTRL0_FSEL_CLKSEL_20M (0x4)
+#define HOST_CTRL0_FSEL_CLKSEL_19200K (0x3)
+#define HOST_CTRL0_FSEL_CLKSEL_12M (0x2)
+#define HOST_CTRL0_FSEL_CLKSEL_10M (0x1)
+#define HOST_CTRL0_FSEL_CLKSEL_9600K (0x0)
+
+#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
+#define HOST_CTRL0_RETENABLE (0x1 << 10)
+#define HOST_CTRL0_COMMONON_N (0x1 << 9)
+#define HOST_CTRL0_SIDDQ (0x1 << 6)
+#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
+#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
+#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
+#define HOST_CTRL0_UTMISWRST (0x1 << 2)
+#define HOST_CTRL0_LINKSWRST (0x1 << 1)
+#define HOST_CTRL0_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
+
+#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
+
+#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
+
+#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
+
+#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
+
+#define HSIC_CTRL_REFCLKSEL_MASK (0x3)
+#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
+
+#define HSIC_CTRL_REFCLKDIV_MASK (0x7f)
+#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
+#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
+#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
+#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
+#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
+#define HSIC_CTRL_REFCLKDIV_20 (0x14)
+
+#define HSIC_CTRL_SIDDQ (0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
+#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
+#define HSIC_CTRL_UTMISWRST (0x1 << 2)
+#define HSIC_CTRL_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
+
+#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
+#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
+#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
+#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
+
+#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
+
+#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
+#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
+#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
+#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_SYS (0x38)
+
+#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
+#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
+#define OTG_SYS_PHY0_SWRST (0x1 << 12)
+
+#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
+#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
+#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
+#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
+
+#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
+#define OTG_SYS_COMMON_ON (0x1 << 7)
+
+#define OTG_SYS_FSEL_MASK (0x7 << 4)
+#define OTG_SYS_FSEL(_x) ((_x) << 4)
+
+#define OTG_SYS_FORCESLEEP (0x1 << 3)
+#define OTG_SYS_OTGDISABLE (0x1 << 2)
+#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
+#define OTG_SYS_FORCESUSPEND (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_TUNE (0x40)
+
#ifndef MHZ
#define MHZ (1000*1000)
#endif
@@ -63,6 +161,7 @@
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
+ TYPE_EXYNOS5250,
};
/*
@@ -73,9 +172,13 @@ enum samsung_cpu_type {
* @clk: usb phy clock
* @regs: usb phy register memory base
* @devctrl_reg: usb device phy-control pmu register memory base
+ * @hostctrl_reg: usb host phy-control pmu register memory base
+ * @phycfg_reg: usb2.0 phy-cfg system register memory base
* @en_mask: enable mask
* @ref_clk_freq: reference clock frequency selection
* @cpu_type: machine identifier
+ * @phy_type: It keeps track of the PHY type.
+ * @host_usage: host_phy usage count.
*/
struct samsung_usbphy {
struct usb_phy phy;
@@ -84,9 +187,13 @@ struct samsung_usbphy {
struct clk *clk;
void __iomem *regs;
void __iomem *devctrl_reg;
+ void __iomem *hostctrl_reg;
+ void __iomem *phycfg_reg;
u32 en_mask;
int ref_clk_freq;
int cpu_type;
+ enum samsung_usb_phy_type phy_type;
+ atomic_t host_usage;
};
#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
@@ -96,26 +203,49 @@ static int samsung_usbphy_parse_dt_param(struct samsung_usbphy *sphy)
struct device_node *usb_phyctrl;
u32 reg;
int lenp;
+ int count = 0;
if (!sphy->dev->of_node) {
sphy->devctrl_reg = NULL;
return -ENODEV;
}
- if (of_get_property(sphy->dev->of_node, "samsung,usb-phyhandle", &lenp)) {
- usb_phyctrl = of_parse_phandle(sphy->dev->of_node,
- "samsung,usb-phyhandle", 0);
- if (!usb_phyctrl) {
- dev_warn(sphy->dev, "Can't get usb-phy handle\n");
- sphy->devctrl_reg = NULL;
- }
-
- of_property_read_u32(usb_phyctrl, "samsung,phyhandle-reg", ®);
+ if (of_get_property(sphy->dev->of_node,
+ "samsung,usb-phyhandle", &lenp)) {
+ do {
+ usb_phyctrl = of_parse_phandle(sphy->dev->of_node,
+ "samsung,usb-phyhandle",
+ count++);
+ if (!usb_phyctrl) {
+ dev_warn(sphy->dev,
+ "Can't get usb-phy handle\n");
+ sphy->devctrl_reg = NULL;
+ }
+
+ of_property_read_u32(usb_phyctrl,
+ "samsung,phyhandle-reg", ®);
+
+ /*
+ * Considering here the maximum number of configurable
+ * register settings: DEVICE_PHY_CONTROL
+ * HOST_PHY_CONTROL
+ * PHY20_CFG
+ */
+ if (of_device_is_compatible(usb_phyctrl,
+ "samsung,usbdev-phyctrl"))
+ sphy->devctrl_reg = ioremap(reg, SZ_4);
+ else if (of_device_is_compatible(usb_phyctrl,
+ "samsung,usbhost-phyctrl"))
+ sphy->hostctrl_reg = ioremap(reg, SZ_4);
+ else if (of_device_is_compatible(usb_phyctrl,
+ "samsung,usb-phycfg"))
+ sphy->phycfg_reg = ioremap(reg, SZ_4);
+
+ of_property_read_u32(sphy->dev->of_node,
+ "samsung,enable-mask", &sphy->en_mask);
+ } while (of_parse_phandle(sphy->dev->of_node,
+ "samsung,usb-phyhandle", count));
- sphy->devctrl_reg = ioremap(reg, SZ_4);
-
- of_property_read_u32(sphy->dev->of_node, "samsung,enable-mask",
- &sphy->en_mask);
of_node_put(usb_phyctrl);
} else {
dev_warn(sphy->dev, "Can't get usb-phy handle\n");
@@ -129,13 +259,18 @@ static int samsung_usbphy_parse_dt_param(struct samsung_usbphy *sphy)
* Set isolation here for phy.
* SOCs control this by controlling corresponding PMU registers
*/
-static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, int on)
+static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy,
+ int on, int type)
{
- void __iomem *usb_phyctrl_reg;
+ void __iomem *usb_phyctrl_reg = NULL;
u32 en_mask = sphy->en_mask;
u32 reg;
- usb_phyctrl_reg = sphy->devctrl_reg;
+ if (type == USB_PHY_TYPE_DEVICE) {
+ usb_phyctrl_reg = sphy->devctrl_reg;
+ } else if (type == USB_PHY_TYPE_HOST) {
+ usb_phyctrl_reg = sphy->hostctrl_reg;
+ }
if (!usb_phyctrl_reg) {
dev_warn(sphy->dev, "Can't set pmu isolation\n");
@@ -151,6 +286,47 @@ static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, int on)
}
/*
+ * Configure the mode of working og usb-phy here: HOST/DEVICE.
+ * SOCs control this by controlling corresponding system register
+ */
+static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy, int type)
+{
+ void __iomem *usb_phycfg_reg;
+ u32 en_mask = sphy->en_mask;
+ u32 reg;
+
+ usb_phycfg_reg = sphy->phycfg_reg;
+
+ if (!usb_phycfg_reg) {
+ dev_warn(sphy->dev, "Can't select specified phy mode\n");
+ return;
+ }
+
+ reg = readl(usb_phycfg_reg);
+
+ if (type == USB_PHY_TYPE_DEVICE)
+ writel(reg & ~en_mask, usb_phycfg_reg);
+ else if (type == USB_PHY_TYPE_HOST)
+ writel(reg | en_mask, usb_phycfg_reg);
+}
+
+/*
+ * PHYs are different for USB Device and USB Host. Controllers can make
+ * sure that the correct PHY type is selected by calling this function
+ * before any PHY operation.
+ */
+int samsung_usbphy_set_type(struct usb_phy *phy,
+ enum samsung_usb_phy_type phy_type)
+{
+ struct samsung_usbphy *sphy = phy_to_sphy(phy);
+
+ if (sphy->phy_type != phy_type)
+ sphy->phy_type = phy_type;
+
+ return 0;
+}
+
+/*
* Returns reference clock frequency selection value
*/
static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
@@ -158,34 +334,178 @@ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
struct clk *ref_clk;
int refclk_freq = 0;
- ref_clk = clk_get(sphy->dev, "xusbxti");
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ ref_clk = clk_get(sphy->dev, "ext_xtal");
+ else
+ ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
- switch (clk_get_rate(ref_clk)) {
- case 12 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_24M;
- break;
- case 48 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_48M;
- break;
- default:
- if (sphy->cpu_type == TYPE_S3C64XX)
- refclk_freq = PHYCLK_CLKSEL_48M;
- else
+ if (sphy->cpu_type == TYPE_EXYNOS5250) {
+ /* set clock frequency for PLL */
+ switch (clk_get_rate(ref_clk)) {
+ case 96 * 100000:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_12M;
+ break;
+ case 192 * 100000:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_20M;
+ break;
+ case 50 * MHZ:
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_50M;
+ break;
+ case 24 * MHZ:
+ default:
+ /* default reference clock */
+ refclk_freq |= HOST_CTRL0_FSEL_CLKSEL_24M;
+ break;
+ }
+ } else {
+ switch (clk_get_rate(ref_clk)) {
+ case 12 * MHZ:
+ refclk_freq = PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
refclk_freq = PHYCLK_CLKSEL_24M;
- break;
+ break;
+ case 48 * MHZ:
+ refclk_freq = PHYCLK_CLKSEL_48M;
+ break;
+ default:
+ if (sphy->cpu_type == TYPE_S3C64XX)
+ refclk_freq = PHYCLK_CLKSEL_48M;
+ else
+ refclk_freq = PHYCLK_CLKSEL_24M;
+ break;
+ }
}
clk_put(ref_clk);
return refclk_freq;
}
+static int exynos5_phyhost_is_on(void *regs)
+{
+ u32 reg;
+
+ reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ return !(reg & HOST_CTRL0_SIDDQ);
+}
+
+static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyclk = sphy->ref_clk_freq;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+ u32 ehcictrl;
+ u32 ohcictrl;
+
+ atomic_inc(&sphy->host_usage);
+
+ if (exynos5_phyhost_is_on(regs)) {
+ dev_info(sphy->dev, "Already power on PHY\n");
+ return;
+ }
+
+ /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
+ samsung_usbphy_cfg_sel(sphy, USB_PHY_TYPE_HOST);
+
+ /* Host configuration */
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* phy reference clock configuration */
+ phyhost &= ~HOST_CTRL0_FSEL_MASK;
+ phyhost |= HOST_CTRL0_FSEL(phyclk);
+
+ /* host phy reset */
+ phyhost &= ~(HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL |
+ HOST_CTRL0_SIDDQ |
+ /* Enable normal mode of operation */
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP);
+
+ /* Link reset */
+ phyhost |= (HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST |
+ /* COMMON Block configuration during suspend */
+ HOST_CTRL0_COMMONON_N);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+ udelay(10);
+ phyhost &= ~(HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* OTG configuration */
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* phy reference clock configuration */
+ phyotg &= ~OTG_SYS_FSEL_MASK;
+ phyotg |= OTG_SYS_FSEL(phyclk);
+
+ /* Enable normal mode of operation */
+ phyotg &= ~(OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP |
+ OTG_SYS_REFCLKSEL_MASK |
+ /* COMMON Block configuration during suspend */
+ OTG_SYS_COMMON_ON);
+
+ /* OTG phy & link reset */
+ phyotg |= (OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET |
+ OTG_SYS_OTGDISABLE |
+ /* Set phy refclk */
+ OTG_SYS_REFCLKSEL_CLKCORE);
+
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+ udelay(10);
+ phyotg &= ~(OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* HSIC phy configuration */
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_PHYSWRST);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+ udelay(10);
+ phyhsic &= ~HSIC_CTRL_PHYSWRST;
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ udelay(80);
+
+ /* enable EHCI DMA burst */
+ ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
+ ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
+ HOST_EHCICTRL_ENAINCR4 |
+ HOST_EHCICTRL_ENAINCR8 |
+ HOST_EHCICTRL_ENAINCR16);
+ writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
+
+ /* set ohci_suspend_on_n */
+ ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
+ ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
+ writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
+}
+
static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
@@ -221,6 +541,41 @@ static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
writel(rstcon, regs + SAMSUNG_RSTCON);
}
+static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+
+ if (atomic_dec_return(&sphy->host_usage) > 0) {
+ dev_info(sphy->dev, "still being used\n");
+ return;
+ }
+
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_SIDDQ |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_FORCESUSPEND);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+ phyhost |= (HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP |
+ HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+ phyotg |= (OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+}
+
static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
@@ -263,10 +618,13 @@ static int samsung_usbphy_init(struct usb_phy *phy)
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
else
- samsung_usbphy_set_isolation(sphy, false);
+ samsung_usbphy_set_isolation(sphy, false, sphy->phy_type);
/* Initialize usb phy registers */
- samsung_usbphy_enable(sphy);
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usbphy_enable(sphy);
+ else
+ samsung_usbphy_enable(sphy);
/* Disable the phy clock */
clk_disable_unprepare(sphy->clk);
@@ -288,13 +646,16 @@ static void samsung_usbphy_shutdown(struct usb_phy *phy)
}
/* De-initialize usb phy registers */
- samsung_usbphy_disable(sphy);
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usbphy_disable(sphy);
+ else
+ samsung_usbphy_disable(sphy);
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(true);
else
- samsung_usbphy_set_isolation(sphy, true);
+ samsung_usbphy_set_isolation(sphy, true, sphy->phy_type);
clk_disable_unprepare(sphy->clk);
}
@@ -339,12 +700,6 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
if (!sphy)
return -ENOMEM;
- clk = devm_clk_get(dev, "otg");
- if (IS_ERR(clk)) {
- dev_err(dev, "Failed to get otg clock\n");
- return PTR_ERR(clk);
- }
-
sphy->dev = &pdev->dev;
ret = samsung_usbphy_parse_dt_param(sphy);
@@ -361,7 +716,6 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
sphy->plat = pdata;
sphy->regs = phy_base;
- sphy->clk = clk;
sphy->phy.dev = sphy->dev;
sphy->phy.label = "samsung-usbphy";
sphy->phy.init = samsung_usbphy_init;
@@ -371,6 +725,17 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, sphy);
+ if (sphy->cpu_type == TYPE_EXYNOS5250)
+ clk = devm_clk_get(dev, "usbhost");
+ else
+ clk = devm_clk_get(dev, "otg");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Failed to get otg clock\n");
+ return PTR_ERR(clk);
+ }
+
+ sphy->clk = clk;
+
return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
}
@@ -382,6 +747,10 @@ static int __exit samsung_usbphy_remove(struct platform_device *pdev)
if (sphy->devctrl_reg)
iounmap(sphy->devctrl_reg);
+ if (sphy->hostctrl_reg)
+ iounmap(sphy->hostctrl_reg);
+ if (sphy->phycfg_reg)
+ iounmap(sphy->phycfg_reg);
return 0;
}
@@ -394,6 +763,9 @@ static const struct of_device_id samsung_usbphy_dt_match[] = {
}, {
.compatible = "samsung,exynos4210-usbphy",
.data = (void *)TYPE_EXYNOS4210,
+ }, {
+ .compatible = "samsung,exynos5250-usbphy",
+ .data = (void *)TYPE_EXYNOS5250,
},
{},
};
@@ -407,6 +779,9 @@ static struct platform_device_id samsung_usbphy_driver_ids[] = {
}, {
.name = "exynos4210-usbphy",
.driver_data = TYPE_EXYNOS4210,
+ }, {
+ .name = "exynos5250-usbphy",
+ .driver_data = TYPE_EXYNOS5250,
},
{},
};
diff --git a/include/linux/usb/samsung_usb_phy.h b/include/linux/usb/samsung_usb_phy.h
index 9167826..aecefaf 100644
--- a/include/linux/usb/samsung_usb_phy.h
+++ b/include/linux/usb/samsung_usb_phy.h
@@ -10,7 +10,20 @@
* option) any later version.
*/
+#include <linux/usb/phy.h>
+
enum samsung_usb_phy_type {
USB_PHY_TYPE_DEVICE,
USB_PHY_TYPE_HOST,
};
+
+#ifdef CONFIG_SAMSUNG_USBPHY
+extern int samsung_usbphy_set_type(struct usb_phy *phy,
+ enum samsung_usb_phy_type phy_type);
+#else
+static inline int samsung_usbphy_set_type(struct usb_phy *phy,
+ enum samsung_usb_phy_type phy_type)
+{
+ return 0;
+}
+#endif /* CONFIG_SAMSUNG_USBPHY */
--
1.7.6.5
More information about the devicetree-discuss
mailing list