[PATCH 1/4] dt: omap3: add SoC file for handling i2c controllers

[G, Manjunath Kondaiah]

On Thu, Jul 14, 2011 at 07:58:35AM +0900, Grant Likely wrote:
> On Thu, Jul 14, 2011 at 7:57 AM, Grant Likely <grant.likely at secretlab.ca> wrote:
> > On Thu, Jul 14, 2011 at 7:06 AM, G, Manjunath Kondaiah <manjugk at ti.com> wrote:
> >>
> >> Add omap3 SoC file for handling omap3 SoC i2c controllers existing
> >> on l4-core bus.
> >>
> >> Out of three i2c controllers, first i2c controller is interfaced with
> >> PMIC on all the boards of OMAP3. The clock for i2c controllers are
> >> controlled through omap hwmod framework hence first i2c controller
> >> device registration through dt is disabled till hwmod dependencies
> >> are resolved.
> >>
> >> Signed-off-by: G, Manjunath Kondaiah <manjugk at ti.com>
> >> ---
> >>  arch/arm/boot/dts/omap3-soc.dtsi |   65 ++++++++++++++++++++++++++++++++++++++
> >>  1 files changed, 65 insertions(+), 0 deletions(-)
> >>  create mode 100644 arch/arm/boot/dts/omap3-soc.dtsi
> >>
> >> diff --git a/arch/arm/boot/dts/omap3-soc.dtsi b/arch/arm/boot/dts/omap3-soc.dtsi
> >> new file mode 100644
> >> index 0000000..f186a32
> >> --- /dev/null
> >> +++ b/arch/arm/boot/dts/omap3-soc.dtsi
> >> @@ -0,0 +1,65 @@
> >> +/*
> >> + * Device Tree Source for OMAP3 SoC
> >> + *
> >> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> >> + *
> >> + * This file is licensed under the terms of the GNU General Public License
> >> + * version 2.  This program is licensed "as is" without any warranty of any
> >> + * kind, whether express or implied.
> >> + */
> >> +
> >> +/dts-v1/;
> >> +/include/ "skeleton.dtsi"
> >> +
> >> +/ {
> >> +       #address-cells = <1>;
> >> +       #size-cells = <1>;
> >> +       model = "ti,omap3";
> >
> > You can drop the model property here since this doesn't define a board.
> >
> >> +       compatible = "ti,omap3";
> >> +
> >> +       intc: interrupt-controller at 0x48200000 {
> >> +               compatible = "ti,omap3-intc", "arm,intc";
> >
> > Which arm intc controller?  For any new 'compatible' value you define,
> > the patch needs to include documentation for it in
> > Documentation/devicetree/bindings.
> >
> >> +               interrupt-controller;
> >> +               #interrupt-cells = <1>;
> >> +               reg = <0x48200000 0x1000>;
> >> +       };
> >> +
> >> +       l4-core {
> >> +               compatible = "ti,l4-core";
> >
> > Probably should be "ti,omap3-l4-core"?
> >
> >> +               #address-cells = <1>;
> >> +               #size-cells = <1>;
> >> +               ranges = <0 0x48000000 0x1000000>;
> >> +
> >> +               i2c at 1 {
> 
> This name is wrong.  The address portion of the name must match the
> address in the first entry of the 'reg' property.  So, that would be:
> "i2c at 70000".
> 
> >> +                       #address-cells = <1>;
> >> +                       #size-cells = <0>;
> >> +                       compatible = "ti,omap3-i2c";
> >> +                       reg = <0x70000 0x100>;
> >> +                       interrupts = < 88 >;
> >> +                       status = "disabled";
> >
> > Drop the 'status' properties.  I know the current tegra code does
> > this, but I'd prefer devices to be enabled by default and for boards
> > to explicitly disable them instead of the other way around.
ok. I will use the convention.

-Manjunath