[PATCH 1/4] dt: omap3: add SoC file for handling i2c controllers

[G, Manjunath Kondaiah]

On Thu, Jul 14, 2011 at 07:57:16AM +0900, Grant Likely wrote:
> On Thu, Jul 14, 2011 at 7:06 AM, G, Manjunath Kondaiah <manjugk at ti.com> wrote:
> >
> > Add omap3 SoC file for handling omap3 SoC i2c controllers existing
> > on l4-core bus.
> >
> > Out of three i2c controllers, first i2c controller is interfaced with
> > PMIC on all the boards of OMAP3. The clock for i2c controllers are
> > controlled through omap hwmod framework hence first i2c controller
> > device registration through dt is disabled till hwmod dependencies
> > are resolved.
> >
> > Signed-off-by: G, Manjunath Kondaiah <manjugk at ti.com>
> > ---
> >  arch/arm/boot/dts/omap3-soc.dtsi |   65 ++++++++++++++++++++++++++++++++++++++
> >  1 files changed, 65 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/omap3-soc.dtsi
> >
> > diff --git a/arch/arm/boot/dts/omap3-soc.dtsi b/arch/arm/boot/dts/omap3-soc.dtsi
> > new file mode 100644
> > index 0000000..f186a32
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/omap3-soc.dtsi
> > @@ -0,0 +1,65 @@
> > +/*
> > + * Device Tree Source for OMAP3 SoC
> > + *
> > + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> > + *
> > + * This file is licensed under the terms of the GNU General Public License
> > + * version 2.  This program is licensed "as is" without any warranty of any
> > + * kind, whether express or implied.
> > + */
> > +
> > +/dts-v1/;
> > +/include/ "skeleton.dtsi"
> > +
> > +/ {
> > +       #address-cells = <1>;
> > +       #size-cells = <1>;
> > +       model = "ti,omap3";
> 
> You can drop the model property here since this doesn't define a board.
ok
> 
> > +       compatible = "ti,omap3";
> > +
> > +       intc: interrupt-controller at 0x48200000 {
> > +               compatible = "ti,omap3-intc", "arm,intc";
> 
> Which arm intc controller?  For any new 'compatible' value you define,
> the patch needs to include documentation for it in
> Documentation/devicetree/bindings.
for time being, I can drop this and introduce later with documentation.
> 
> > +               interrupt-controller;
> > +               #interrupt-cells = <1>;
> > +               reg = <0x48200000 0x1000>;
> > +       };
> > +
> > +       l4-core {
> > +               compatible = "ti,l4-core";
> 
> Probably should be "ti,omap3-l4-core"?
ok.
> 
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +               ranges = <0 0x48000000 0x1000000>;
> > +
> > +               i2c at 1 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       compatible = "ti,omap3-i2c";
> > +                       reg = <0x70000 0x100>;
> > +                       interrupts = < 88 >;
> > +                       status = "disabled";
> 
> Drop the 'status' properties.  I know the current tegra code does
> this, but I'd prefer devices to be enabled by default and for boards
> to explicitly disable them instead of the other way around.
wanted to disable i2c1 by default. i will remove.

-Manjunath