Help with SPI node
Joe Shmo
spamreceptor at yahoo.com
Fri Oct 2 02:19:49 EST 2009
I'm attempting to get SPI to work on my embedded design
that is based on the mpc8313erbd reference board wiht a
2.6.27 kernel. I cannot open the SPI device.
Tracing through the kernel code, it looks like the device is
not being found in the DTB file. However there is a
SPI node in there already described. Our boards is a
SPI master, and the device we will attach is a SPI
slave. Could someone elaborate on what is needed in
the DTS file to have our SPI driver work and respond to an
open() call?
I've attached our latest attempt at modifying the DTS
file.
> /*
> * MPC8313E RDB Device Tree Source
> *
> * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
> *
> * This program is free software; you can
> redistribute it and/or modify it
> * under the terms of the GNU General
> Public License as published by the
> * Free Software Foundation; either version 2 of
> the License, or (at your
> * option) any later version.
> */
> /dts-v1/;
> / {
> model = "MPC8313ERDB";
> compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
> #address-cells = <1>;
> #size-cells = <1>;
> aliases {
> ethernet0 = &enet0;
> ethernet1 = &enet1;
> serial0 = &serial0;
> serial1 = &serial1;
> pci0 = &pci0;
> };
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> PowerPC,8313 at 0 {
> device_type = "cpu";
> reg = <0x0>;
> d-cache-line-size = <32>;
> i-cache-line-size = <32>;
> d-cache-size = <16384>;
> i-cache-size = <16384>;
> timebase-frequency = <0>; // from
> bootloader
> bus-frequency = <0>; // from
> bootloader
> clock-frequency = <0>; //
> from bootloader
> };
> };
> memory {
> device_type = "memory";
> reg = <0x00000000 0x08000000>; // 128MB at 0
> };
> localbus at e0005000 {
> #address-cells = <2>;
> #size-cells = <1>;
> compatible = "fsl,mpc8313-elbc", "fsl,elbc",
> "simple-bus";
> reg = <0xe0005000 0x1000>;
> interrupts = <77 0x8>;
> interrupt-parent = <&ipic>;
> // CS0 and CS1 are swapped when
> // booting from nand, but the
> // addresses are the same.
> ranges = <0x0 0x0 0xfe000000 0x00200000
> 0x1 0x0
> 0xc0000000 0x02000000
> 0x2 0x0
> 0xf0000000 0x00020000
> 0x3 0x0
> 0xfa000000 0x00008000>;
> /* remapped for our part */
> flash at 0,0 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "cfi-flash";
> reg = <0x0 0x0 0x200000>;
> bank-width = <2>;
> device-width = <1>;
>
> u-boot at 0 {
> reg = <0x0 0x40000>;
> };
> u-boot-env at 40000 {
> reg = <0x40000 0x10000>;
> };
> kernel at 50000 {
> reg = <0x50000 0x1A0000>;
> };
> dtb at 1F0000 {
> reg = <0x1f0000 0x10000>;
> };
> };
> /* DCC - remapped for our part */
> nand at 1,0 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "fsl,mpc8313-fcm-nand",
>
> "fsl,elbc-fcm-nand";
> reg = <0x1 0x0 0x02000000>;
> fs1 at 0 {
> reg = <0x0 0x10000000>;
> };
> fs2 at 10000000 {
> reg = <0x10000000 0x10000000>;
> };
> };
> };
> soc8313 at e0000000 {
> #address-cells = <1>;
> #size-cells = <1>;
> device_type = "soc";
> compatible = "simple-bus";
> ranges = <0x0 0xe0000000 0x00100000>;
> reg = <0xe0000000 0x00000200>;
> bus-frequency = <0>;
> wdt at 200 {
> device_type = "watchdog";
> compatible = "mpc83xx_wdt";
> reg = <0x200 0x100>;
> };
> /*
> * FPGA-TNG device
> * used 4 external interrupts
> * IRQ0 - magnetec stripe image writer/reader
> * IRQ1 - picture image writer
> * IRQ2 - RFID reader -
> * IRQ3 - MiniPCI?
> * IRQ4 - motion devices
> */
> fpga-tng at f0000000 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "fpga-tng";
> ranges;
> /* IRQ 0 level */
> magstripe at 00 {
> device_type = "magstripe";
> compatible = "ms_tng";
> reg = <0x00 0x4>;
> interrupts = <48 0x8>;
> interrupt-parent = < &ipic >;
> };
> /* IRQ 1 level */
> tph at 5e {
> device_type = "tph";
> compatible = "tph_tng";
> reg = <0x5e 0x4>;
> interrupts = <17 0x8>;
> interrupt-parent = < &ipic >;
> };
> motion at 8e {
> device_type = "motion";
> compatible = "motion_tng";
> reg = <0x8e 0x4>;
> interrupts = <20 0x8>;
> interrupt-parent = < &ipic >;
> };
> };
> sleep-nexus {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "simple-bus";
> sleep = <&pmc 0x03000000>;
> ranges;
> pit at 400 {
> device_type = "pit";
> compatible = "mpc_pit";
> reg = <0x400 0x100>;
> interrupts = <65 0x8>;
> interrupt-parent = < &ipic >;
> clock-frequency = <133333330>;
> };
> i2c at 3000 {
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <0>;
> compatible = "fsl-i2c";
> reg = <0x3000 0x100>;
> interrupts = <14 0x8>;
> interrupt-parent = <&ipic>;
> dfsrr;
> sensor at 48 {
> compatible = "national,lm75";
> reg = <0x48>;
> };
> rtc at 68 {
> compatible = "dallas,ds1339";
> reg = <0x68>;
> };
>
> };
> spi at 7000 {
> device_type = "spi";
> cell-index = <0>;
> compatible =
> "fsl,spi","fsl,mpc83xx-spi","fsl,mpc83xx_spi";
> reg = <0x7000 0x1000>;
> interrupts = <21 0x8>;
> interrupt-parent = <&ipic>;
> mode = "cpu";
>
> fsl_m25p80 at 0 {
> compatible = "fsl,spi";
> reg = <0>;
> voltage-ranges = <3300
> 3300>;
> spi-max-frequency =
> <6000000>;
> };
> };
> crypto at 30000 {
> compatible = "fsl,sec2.2", "fsl,sec2.1",
>
> "fsl,sec2.0";
> reg = <0x30000 0x10000>;
> interrupts = <11 0x8>;
> interrupt-parent = <&ipic>;
> fsl,num-channels = <1>;
> fsl,channel-fifo-len = <24>;
> fsl,exec-units-mask = <0x4c>;
> fsl,descriptor-types-mask =
> <0x0122003f>;
> };
> };
> i2c at 3100 {
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <1>;
> compatible = "fsl-i2c";
> reg = <0x3100 0x100>;
> interrupts = <15 0x8>;
> interrupt-parent = <&ipic>;
> dfsrr;
> };
> spi at 7000 {
> device_type = "spi";
> cell-index = <0>;
> compatible =
> "fsl,spi","fsl,mpc83xx_spi";
> reg = <0x7000 0x1000>;
> interrupts = <16 0x8>;
> interrupt-parent = <&ipic>;
> mode = "cpu";
>
> mp85p20 at 0 {
> compatible = "fsl,spi";
> reg = <0>;
> voltage-ranges = <3300
> 3300>;
> spi-max-frequency =
> <6000000>;
> };
> };
> dma at 82a8 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "fsl,mpc8313-dma",
> "fsl,elo-dma";
> reg = <0x82a8 4>;
> ranges = <0 0x8100 0x1a8>;
> interrupt-parent = <&ipic>;
> interrupts = <71 8>;
> cell-index = <0>;
> dma-channel at 0 {
> compatible = "fsl,mpc8313-dma-channel",
> "fsl,elo-dma-channel";
> reg = <0 0x80>;
> interrupt-parent = <&ipic>;
> interrupts = <71 8>;
> };
> dma-channel at 80 {
> compatible = "fsl,mpc8313-dma-channel",
> "fsl,elo-dma-channel";
> reg = <0x80 0x80>;
> interrupt-parent = <&ipic>;
> interrupts = <71 8>;
> };
> dma-channel at 100 {
> compatible = "fsl,mpc8313-dma-channel",
> "fsl,elo-dma-channel";
> reg = <0x100 0x80>;
> interrupt-parent = <&ipic>;
> interrupts = <71 8>;
> };
> dma-channel at 180 {
> compatible = "fsl,mpc8313-dma-channel",
> "fsl,elo-dma-channel";
> reg = <0x180 0x28>;
> interrupt-parent = <&ipic>;
> interrupts = <71 8>;
> };
> };
> /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
> usb at 23000 {
> compatible = "fsl-usb2-dr";
> reg = <0x23000 0x1000>;
> #address-cells = <1>;
> #size-cells = <0>;
> interrupt-parent = <&ipic>;
> interrupts = <38 0x8>;
> phy_type = "utmi_wide";
> dr_mode = "peripheral";
> sleep = <&pmc 0x00300000>;
> };
> enet0: ethernet at 24000 {
> #address-cells = <1>;
> #size-cells = <1>;
> sleep = <&pmc 0x20000000>;
> ranges;
> cell-index = <0>;
> device_type = "network";
> model = "eTSEC";
> compatible = "gianfar", "simple-bus";
> reg = <0x24000 0x1000>;
> local-mac-address = [ 00 00 00 00 00 00
> ];
> interrupts = <32 0x8 33 0x8 34
> 0x8>;
> interrupt-parent = <&ipic>;
> phy-handle = < &phy3 >;
> fsl,magic-packet;
> mdio at 24520 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "fsl,gianfar-mdio";
> reg = <0x24520 0x20>;
> phy3: ethernet-phy at 3 {
> interrupt-parent =
> <&ipic>;
> reg = <0x3>;
> device_type = "ethernet-phy";
> };
> phy1: ethernet-phy at 1 {
> interrupt-parent =
> <&ipic>;
> reg = <0x1>;
> device_type = "ethernet-phy";
> };
> };
> };
> enet1: ethernet at 25000 {
> cell-index = <1>;
> device_type = "network";
> model = "eTSEC";
> compatible = "gianfar";
> reg = <0x25000 0x1000>;
> local-mac-address = [ 00 00 00 00 00 00
> ];
> interrupts = <35 0x8 36 0x8 37
> 0x8>;
> interrupt-parent = <&ipic>;
> phy-handle = < &phy1 >;
> sleep = <&pmc 0x10000000>;
> fsl,magic-packet;
> };
> serial0: serial at 4500 {
> cell-index = <0>;
> device_type = "serial";
> compatible = "ns16550";
> reg = <0x4500 0x100>;
> clock-frequency = <0>;
> interrupts = <9 0x8>;
> interrupt-parent = <&ipic>;
> };
> serial1: serial at 4600 {
> cell-index = <1>;
> device_type = "serial";
> compatible = "ns16550";
> reg = <0x4600 0x100>;
> clock-frequency = <0>;
> interrupts = <10 0x8>;
> interrupt-parent = <&ipic>;
> };
> /* IPIC
> * interrupts cell = <intr #,
> sense>
> * sense values match linux
> IORESOURCE_IRQ_* defines:
> * sense == 8: Level, low assertion
> * sense == 2: Edge, high-to-low change
> */
> ipic: pic at 700 {
> interrupt-controller;
> #address-cells = <0>;
> #interrupt-cells = <2>;
> reg = <0x700 0x100>;
> device_type = "ipic";
> };
> pmc: power at b00 {
> compatible = "fsl,mpc8313-pmc",
> "fsl,mpc8349-pmc";
> reg = <0xb00 0x100 0xa00 0x100>;
> interrupts = <80 8>;
> interrupt-parent = <&ipic>;
> fsl,mpc8313-wakeup-timer =
> <>m1>;
> /* Remove this (or change to "okay") if
> you have
> * a REVA3 or later board, if you apply one of
> the
> * workarounds listed in section 8.5 of the
> board
> * manual, or if you are adapting this device
> tree
> * to a different board.
> */
> status = "fail";
> };
> gtm1: timer at 500 {
> compatible = "fsl,mpc8313-gtm",
> "fsl,gtm";
> reg = <0x500 0x100>;
> interrupts = <90 8 78 8 84 8 72
> 8>;
> interrupt-parent = <&ipic>;
> };
> timer at 600 {
> compatible = "fsl,mpc8313-gtm",
> "fsl,gtm";
> reg = <0x600 0x100>;
> interrupts = <91 8 79 8 85 8 73
> 8>;
> interrupt-parent = <&ipic>;
> };
> };
> sleep-nexus {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "simple-bus";
> sleep = <&pmc 0x00010000>;
> ranges;
> pci0: pci at e0008500 {
> cell-index = <1>;
> interrupt-map-mask = <0xf800 0x0 0x0
> 0x7>;
> interrupt-map = <
> /* IDSEL 0x0E -mini PCI */
> 0x7000 0x0 0x0 0x1 &ipic 18 0x8
> 0x7000 0x0 0x0 0x2 &ipic 18 0x8
> 0x7000 0x0 0x0 0x3 &ipic 18 0x8
> 0x7000 0x0 0x0 0x4 &ipic 18 0x8
> /* IDSEL 0x0F - PCI slot */
> 0x7800 0x0 0x0 0x1 &ipic 17 0x8
> 0x7800 0x0 0x0 0x2 &ipic 18 0x8
> 0x7800 0x0 0x0 0x3 &ipic 17 0x8
> 0x7800 0x0 0x0 0x4 &ipic 18
> 0x8>;
> interrupt-parent = <&ipic>;
> interrupts = <66 0x8>;
> bus-range = <0x0 0x0>;
> ranges = <0x02000000 0x0 0x90000000
> 0x90000000 0x0 0x10000000
> 0x42000000 0x0 0x80000000 0x80000000
> 0x0 0x10000000
> 0x01000000 0x0 0x00000000 0xe2000000
> 0x0 0x00100000>;
> clock-frequency = <66666666>;
> #interrupt-cells = <1>;
> #size-cells = <2>;
> #address-cells = <3>;
> reg = <0xe0008500 0x100>;
> compatible = "fsl,mpc8349-pci";
> device_type = "pci";
> };
> };
> };
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20091001/c379d29e/attachment-0001.htm>
More information about the devicetree-discuss
mailing list