[Cbe-oss-dev] Fwd: [PATCH] Add QPACE as a separated Cell platform
Arnd Bergmann
arnd at arndb.de
Fri Nov 28 02:40:42 EST 2008
From: Benjamin Krill <ben at codiert.org>
Since the QPACE (Chromodynamics Parallel Computing on the
Cell Broadband Engine) platform doesn't use a iommu, doesn't
have PCI devices and a MPIC much lesser setup and
configurations are needed. So far all devices are detected
as OF device. A notifier function is used to set the dma_ops
for the of_platform bus. Further this patch splits the
PPC_CELL_NATIVE into PPC_CELL_COMMON which are parts that are
shared with the QPACE platform and the rest.
Signed-off-by: Benjamin Krill <ben at codiert.org>
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
arch/powerpc/boot/Makefile | 1 +
arch/powerpc/platforms/cell/Kconfig | 19 +++--
arch/powerpc/platforms/cell/Makefile | 17 ++--
arch/powerpc/platforms/cell/qpace_setup.c | 141 +++++++++++++++++++++++++++++
4 files changed, 163 insertions(+), 15 deletions(-)
create mode 100644 arch/powerpc/platforms/cell/qpace_setup.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8fc6d72..75412aa 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -193,6 +193,7 @@ image-$(CONFIG_PPC_MAPLE) += zImage.pseries
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
image-$(CONFIG_PPC_PS3) += dtbImage.ps3
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
+image-$(CONFIG_PPC_CELL_QPACE) += zImage.pseries
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index c14d7d8..56ae9c5 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -2,13 +2,18 @@ config PPC_CELL
bool
default n
-config PPC_CELL_NATIVE
+config PPC_CELL_COMMON
bool
select PPC_CELL
select PPC_DCR_MMIO
- select PPC_OF_PLATFORM_PCI
select PPC_INDIRECT_IO
select PPC_NATIVE
+ select PPC_RTAS
+
+config PPC_CELL_NATIVE
+ bool
+ select PPC_CELL_COMMON
+ select PPC_OF_PLATFORM_PCI
select MPIC
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
@@ -20,7 +25,6 @@ config PPC_IBM_CELL_BLADE
bool "IBM Cell Blade"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL_NATIVE
- select PPC_RTAS
select MMIO_NVRAM
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
@@ -28,16 +32,17 @@ config PPC_IBM_CELL_BLADE
config PPC_CELLEB
bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
depends on PPC_MULTIPLATFORM && PPC64
- select PPC_CELL
select PPC_CELL_NATIVE
- select PPC_RTAS
- select PPC_INDIRECT_IO
- select PPC_OF_PLATFORM_PCI
select HAS_TXX9_SERIAL
select PPC_UDBG_BEAT
select USB_OHCI_BIG_ENDIAN_MMIO
select USB_EHCI_BIG_ENDIAN_MMIO
+config PPC_CELL_QPACE
+ bool "IBM Cell - QPACE"
+ depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL_COMMON
+
menu "Cell Broadband Engine options"
depends on PPC_CELL
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 7fd8308..43eccb2 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -1,7 +1,7 @@
-obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \
- cbe_regs.o spider-pic.o \
- pervasive.o pmu.o io-workarounds.o \
- spider-pci.o
+obj-$(CONFIG_PPC_CELL_COMMON) += cbe_regs.o interrupt.o pervasive.o
+
+obj-$(CONFIG_PPC_CELL_NATIVE) += iommu.o setup.o spider-pic.o \
+ pmu.o io-workarounds.o spider-pci.o
obj-$(CONFIG_CBE_RAS) += ras.o
obj-$(CONFIG_CBE_THERM) += cbe_thermal.o
@@ -14,13 +14,12 @@ obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o
ifeq ($(CONFIG_SMP),y)
obj-$(CONFIG_PPC_CELL_NATIVE) += smp.o
+obj-$(CONFIG_PPC_CELL_QPACE) += smp.o
endif
# needed only when building loadable spufs.ko
-spu-priv1-$(CONFIG_PPC_CELL_NATIVE) += spu_priv1_mmio.o
-
-spu-manage-$(CONFIG_PPC_CELLEB) += spu_manage.o
-spu-manage-$(CONFIG_PPC_CELL_NATIVE) += spu_manage.o
+spu-priv1-$(CONFIG_PPC_CELL_COMMON) += spu_priv1_mmio.o
+spu-manage-$(CONFIG_PPC_CELL_COMMON) += spu_manage.o
obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \
spu_notify.o \
@@ -31,6 +30,8 @@ obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \
obj-$(CONFIG_PCI_MSI) += axon_msi.o
+# qpace setup
+obj-$(CONFIG_PPC_CELL_QPACE) += qpace_setup.o
# celleb stuff
ifeq ($(CONFIG_PPC_CELLEB),y)
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
new file mode 100644
index 0000000..c724fb2
--- /dev/null
+++ b/arch/powerpc/platforms/cell/qpace_setup.c
@@ -0,0 +1,141 @@
+/*
+ * linux/arch/powerpc/platforms/cell/qpace_setup.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Adapted from 'alpha' version by Gary Thomas
+ * Modified by Cort Dougan (cort at cs.nmt.edu)
+ * Modified by PPC64 Team, IBM Corp
+ * Modified by Cell Team, IBM Deutschland Entwicklung GmbH
+ * Modified by Benjamin Krill <ben at codiert.org>, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/console.h>
+#include <linux/of_platform.h>
+
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/kexec.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/cputable.h>
+#include <asm/irq.h>
+#include <asm/spu.h>
+#include <asm/spu_priv1.h>
+#include <asm/udbg.h>
+#include <asm/cell-regs.h>
+
+#include "interrupt.h"
+#include "pervasive.h"
+#include "ras.h"
+#include "io-workarounds.h"
+
+static void qpace_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ const char *model = "";
+
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ seq_printf(m, "machine\t\t: CHRP %s\n", model);
+ of_node_put(root);
+}
+
+static void qpace_progress(char *s, unsigned short hex)
+{
+ printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+static int __init qpace_publish_devices(void)
+{
+ /* Publish OF platform devices for southbridge IOs */
+ of_platform_bus_probe(NULL, NULL, NULL);
+
+ return 0;
+}
+machine_subsys_initcall(qpace, qpace_publish_devices);
+
+extern int qpace_notify(struct device *dev)
+{
+ /* set dma_ops for of_platform bus */
+ if (dev->bus && dev->bus->name
+ && !strcmp(dev->bus->name, "of_platform"))
+ set_dma_ops(dev, &dma_direct_ops);
+
+ return 0;
+}
+
+static void __init qpace_setup_arch(void)
+{
+#ifdef CONFIG_SPU_BASE
+ spu_priv1_ops = &spu_priv1_mmio_ops;
+ spu_management_ops = &spu_management_of_ops;
+#endif
+
+ cbe_regs_init();
+
+#ifdef CONFIG_CBE_RAS
+ cbe_ras_init();
+#endif
+
+#ifdef CONFIG_SMP
+ smp_init_cell();
+#endif
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ cbe_pervasive_init();
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
+ /* set notifier function */
+ platform_notify = &qpace_notify;
+}
+
+static int __init qpace_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "IBM,QPACE"))
+ return 0;
+
+ hpte_init_native();
+
+ return 1;
+}
+
+define_machine(qpace) {
+ .name = "QPACE",
+ .probe = qpace_probe,
+ .setup_arch = qpace_setup_arch,
+ .show_cpuinfo = qpace_show_cpuinfo,
+ .restart = rtas_restart,
+ .power_off = rtas_power_off,
+ .halt = rtas_halt,
+ .get_boot_time = rtas_get_boot_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = qpace_progress,
+ .init_IRQ = iic_init_IRQ,
+#ifdef CONFIG_KEXEC
+ .machine_kexec = default_machine_kexec,
+ .machine_kexec_prepare = default_machine_kexec_prepare,
+ .machine_crash_shutdown = default_machine_crash_shutdown,
+#endif
+};
--
1.6.0.3
-------------------------------------------------------
More information about the cbe-oss-dev
mailing list