March 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Mar 1 04:51:47 AEDT 2024
Ending: Sun Mar 31 05:36:52 AEDT 2024
Messages: 157

• [PATCH v1] ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card   Delphine CC Chiu
• [PATCH v6 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4   Delphine CC Chiu
• [PATCH v6 01/22] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices   Delphine CC Chiu
• [PATCH v6 02/22] ARM: dts: aspeed: yosemite4: Enable adc15   Delphine CC Chiu
• [PATCH v6 03/22] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting   Delphine CC Chiu
• [PATCH v6 04/22] ARM: dts: aspeed: yosemite4: Enable watchdog2   Delphine CC Chiu
• [PATCH v6 05/22] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode   Delphine CC Chiu
• [PATCH v6 06/22] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change   Delphine CC Chiu
• [PATCH v6 07/22] ARM: dts: aspeed: yosemite4: Add gpio pca9506   Delphine CC Chiu
• [PATCH v6 08/22] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible   Delphine CC Chiu
• [PATCH v6 09/22] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555   Delphine CC Chiu
• [PATCH v6 10/22] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading   Delphine CC Chiu
• [PATCH v6 11/22] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use   Delphine CC Chiu
• [PATCH v6 12/22] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v6 13/22] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v6 14/22] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v6 15/22] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection   Delphine CC Chiu
• [PATCH v6 16/22] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state   Delphine CC Chiu
• [PATCH v6 17/22] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config   Delphine CC Chiu
• [PATCH v6 18/22] ARM: dts: aspeed: yosemite4: add mctp config for NIC   Delphine CC Chiu
• [PATCH v6 19/22] ARM: dts: aspeed: yosemite4: support mux to cpld   Delphine CC Chiu
• [PATCH v6 20/22] ARM: dts: aspeed: yosemite4: support medusa board adc sensors   Delphine CC Chiu
• [PATCH v6 21/22] ARM: dts: aspeed: yosemite4: support NIC eeprom   Delphine CC Chiu
• [PATCH v6 22/22] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle   Delphine CC Chiu
• [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630   Delphine CC Chiu
• [PATCH v7 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4   Delphine CC Chiu
• [PATCH v7 01/22] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices   Delphine CC Chiu
• [PATCH v7 02/22] ARM: dts: aspeed: yosemite4: Enable adc15   Delphine CC Chiu
• [PATCH v7 03/22] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting   Delphine CC Chiu
• [PATCH v7 04/22] ARM: dts: aspeed: yosemite4: Enable watchdog2   Delphine CC Chiu
• [PATCH v7 05/22] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode   Delphine CC Chiu
• [PATCH v7 06/22] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change   Delphine CC Chiu
• [PATCH v7 07/22] ARM: dts: aspeed: yosemite4: Add gpio pca9506   Delphine CC Chiu
• [PATCH v7 08/22] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible   Delphine CC Chiu
• [PATCH v7 09/22] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555   Delphine CC Chiu
• [PATCH v7 10/22] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading   Delphine CC Chiu
• [PATCH v7 11/22] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use   Delphine CC Chiu
• [PATCH v7 12/22] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v7 13/22] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v7 14/22] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v7 15/22] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection   Delphine CC Chiu
• [PATCH v7 16/22] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state   Delphine CC Chiu
• [PATCH v7 17/22] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config   Delphine CC Chiu
• [PATCH v7 18/22] ARM: dts: aspeed: yosemite4: add mctp config for NIC   Delphine CC Chiu
• [PATCH v7 19/22] ARM: dts: aspeed: yosemite4: support mux to cpld   Delphine CC Chiu
• [PATCH v7 20/22] ARM: dts: aspeed: yosemite4: support medusa board adc sensors   Delphine CC Chiu
• [PATCH v7 21/22] ARM: dts: aspeed: yosemite4: support NIC eeprom   Delphine CC Chiu
• [PATCH v7 22/22] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle   Delphine CC Chiu
• [PATCH v1] ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k   Delphine CC Chiu
• [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630   Delphine_CC_Chiu/WYHQ/Wiwynn
• [PATCH v5 1/2] dt-bindings: arm: aspeed: add ASUS X4TF board   Conor Dooley
• [PATCH v2] dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema   Conor Dooley
• [PATCH v6 1/2] dt-bindings: arm: aspeed: add ASUS X4TF board   Conor Dooley
• [PATCH v6] dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema   Bartosz Golaszewski
• [PATCH v7 0/5] mmc: add hi3798mv200 specific extensions of DWMMC   Ulf Hansson
• [PATCH v6 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4   Rob Herring
• [PATCH v2 4/4] dt-bindings: aspeed: Add eSPI controller   Rob Herring
• [PATCH] i2c: aspeed: Fix the dummy irq expected print   Tommy Huang
• [PATCH v2] i2c: aspeed: Fix the dummy irq expected print   Tommy Huang
• [PATCH v6] dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema   Andrew Jeffery
• [PATCH v5 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project   Andrew Jeffery
• [PATCH v6] dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema   Andrew Jeffery
• [PATCH 5/6] ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void   Andrew Jeffery
• [PATCH v2] pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T   Andrew Jeffery
• [PATCH v6 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4   Andrew Jeffery
• [PATCH 05/64] i2c: aspeed: reword according to newest specification   Andrew Jeffery
• [PATCH v6 0/2] Add Reviewed-by and Acked-by tags   Andrew Jeffery
• [PATCH 0/6] ipmi: Convert to platform remove callback returning void   Uwe Kleine-König
• [PATCH 5/6] ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void   Uwe Kleine-König
• [PATCH 0/4] fsi: Convert to platform remove callback returning void   Uwe Kleine-König
• [PATCH 1/4] fsi: master-aspeed: Convert to platform remove callback returning void   Uwe Kleine-König
• [PATCH 0/2] hwmon: (aspeed-g6-pwm-tacho): Prepare for further pwm core changes   Uwe Kleine-König
• [PATCH 1/2] hwmon: (aspeed-g6-pwm-tacho): Make use of pwmchip_parent() accessor   Uwe Kleine-König
• [PATCH 2/2] hwmon: (aspeed-g6-pwm-tacho): Make use of devm_pwmchip_alloc() function   Uwe Kleine-König
• [PATCH 1/1] ARM:dts:aspeed: Initial device tree for AMD Onyx Platform   Krzysztof Kozlowski
• [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD Onyx Platform   Krzysztof Kozlowski
• [PATCH] ARM: dts: aspeed: asus: Add ASUS X4TF BMC   Krzysztof Kozlowski
• [PATCH v2] drivers: watchdog: ast2600 support bootstatus   Krzysztof Kozlowski
• [PATCH v2 1/4] Add eSPI device driver (flash channel)   Krzysztof Kozlowski
• [PATCH v2 3/4] ARM: dts: aspeed: Add eSPI node   Krzysztof Kozlowski
• [PATCH v2 2/4] mtd: Replace module_init with subsys_initcall   Krzysztof Kozlowski
• [PATCH v2 4/4] dt-bindings: aspeed: Add eSPI controller   Krzysztof Kozlowski
• [PATCH v2 4/4] dt-bindings: aspeed: Add eSPI controller   Krzysztof Kozlowski
• [PATCH v6 1/2] dt-bindings: arm: aspeed: add ASUS X4TF board   Krzysztof Kozlowski
• [PATCH v6 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project   Krzysztof Kozlowski
• [PATCH v2 4/4] dt-bindings: aspeed: Add eSPI controller   Krzysztof Kozlowski
• [PATCH v2 03/14] serial: port: Introduce a common helper to read properties   Greg Kroah-Hartman
• [PATCH AUTOSEL 6.7 19/24] arm: dts: Fix dtc interrupt_provider warnings   Sasha Levin
• [PATCH AUTOSEL 6.6 18/22] arm: dts: Fix dtc interrupt_provider warnings   Sasha Levin
• [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD Onyx Platform   Andrew Lunn
• [PATCH] pinctrl: pinctrl-aspeed-g6: Fix register offset.   Paul Menzel
• [PATCH v2] pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T   Paul Menzel
• [PATCH v2] drivers: watchdog: ast2600 support bootstatus   PeterYin
• [PATCH v5 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   PeterYin
• [PATCH v2 2/4] mtd: Replace module_init with subsys_initcall   Miquel Raynal
• [PATCH v14 1/3] dt-bindings: hwmon: fan: Add fan binding to schema   Guenter Roeck
• [PATCH v14 2/3] dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control   Guenter Roeck
• [PATCH v14 3/3] hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach   Guenter Roeck
• [PATCH v1] drivers: watchdog: ast2600 support bootstatus   Guenter Roeck
• [PATCH 1/2] hwmon: (aspeed-g6-pwm-tacho): Make use of pwmchip_parent() accessor   Guenter Roeck
• [PATCH 2/2] hwmon: (aspeed-g6-pwm-tacho): Make use of devm_pwmchip_alloc() function   Guenter Roeck
• [PATCH v2] drivers: watchdog: ast2600 support bootstatus   Guenter Roeck
• [PATCH v2] drivers: watchdog: ast2600 support bootstatus   Guenter Roeck
• [PATCH v3 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Guenter Roeck
• [PATCH v4 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Guenter Roeck
• [PATCH] i2c: aspeed: Fix the dummy irq expected print   Wolfram Sang
• [PATCH 00/64] i2c: reword i2c_algorithm according to newest specification   Wolfram Sang
• [PATCH 05/64] i2c: aspeed: reword according to newest specification   Wolfram Sang
• [PATCH v2 03/14] serial: port: Introduce a common helper to read properties   Andy Shevchenko
• [PATCH v3 00/14] serial: Add a helper to parse device properties and more   Andy Shevchenko
• [PATCH v3 01/14] serial: core: Move struct uart_port::quirks closer to possible values   Andy Shevchenko
• [PATCH v3 02/14] serial: core: Add UPIO_UNKNOWN constant for unknown port type   Andy Shevchenko
• [PATCH v3 03/14] serial: port: Introduce a common helper to read properties   Andy Shevchenko
• [PATCH v3 04/14] serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 05/14] serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 06/14] serial: 8250_bcm7271: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 07/14] serial: 8250_dw: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 08/14] serial: 8250_ingenic: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 09/14] serial: 8250_lpc18xx: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 10/14] serial: 8250_of: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 11/14] serial: 8250_omap: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 12/14] serial: 8250_pxa: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 13/14] serial: 8250_tegra: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v3 14/14] serial: 8250_uniphier: Switch to use uart_read_port_properties()   Andy Shevchenko
• [PATCH v2] i2c: aspeed: Fix the dummy irq expected print   Andi Shyti
• [PATCH 00/64] i2c: reword i2c_algorithm according to newest specification   Andi Shyti
• [PATCH 05/64] i2c: aspeed: reword according to newest specification   Andi Shyti
• [PATCH 00/64] i2c: reword i2c_algorithm according to newest specification   Andi Shyti
• [PATCH] pinctrl: pinctrl-aspeed-g6: Fix register offset.   Billy Tsai
• [PATCH v2] pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T   Billy Tsai
• [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD Onyx Platform   Supreeth Venkatesh
• [PATCH v2] pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T   Linus Walleij
• [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630   Linus Walleij
• [PATCH v4 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Chia Hsing Yin
• [PATCH v1] drivers: watchdog: ast2600 support bootstatus   Peter Yin
• [PATCH v2] drivers: watchdog: ast2600 support bootstatus   Peter Yin
• [PATCH v3 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v3 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register   Peter Yin
• [PATCH v3 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register   Peter Yin
• [PATCH v3 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu   Peter Yin
• [PATCH v3 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v4 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v4 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register   Peter Yin
• [PATCH v4 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register   Peter Yin
• [PATCH v4 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu   Peter Yin
• [PATCH v4 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v5 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v5 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v5 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register   Peter Yin
• [PATCH v5 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register   Peter Yin
• [PATCH v5 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu   Peter Yin
• [PATCH v5 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v6 0/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin
• [PATCH v6 1/4] ARM: dts: aspeed: Add the AST2500 WDT with SCU register   Peter Yin
• [PATCH v6 2/4] ARM: dts: aspeed: Add the AST2600 WDT with SCU register   Peter Yin
• [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu   Peter Yin
• [PATCH v6 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus   Peter Yin

Last message date: Sun Mar 31 05:36:52 AEDT 2024
Archived on: Sun Mar 31 05:37:06 AEDT 2024

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...