[Skiboot] [PATCH 00/16] OpenCAPI 5.0 Support for P10

[Frederic Barrat]

On 20/08/2021 11:45, Christophe Lombard wrote:
> The Open Coherently Attached Processor Interface (OCAPI) is used to
> allow an Attached Functional Unit (AFU) to connect to the Processor
> Chip's system bus in a high speed and cache coherent manner.
> 
> This series implements OpenCAPI support for P10.


We shouldn't use "OpenCAPI 5.0", since it really is not. Arguably 4.0.
I would just say "OpenCAPI support for P10".

All the patches in this series have "[PATCH x/y]" duplicated in their title.

   Fred


> The series is divided as follows:
> 
>   - Patches 1-3: general refactoring
> 
>     Add various structs and fields we'll need later.
> 
>   - Patch 4: Detect devices on Rainier platform
> 
>   - Patches 5-9: setting up the PAU
> 
>   - Patch 10: create OpenCAPI PHBs
> 
>   - Patch 11: dumping hmi scoms
> 
>   - Patch 12-13: Link training and Phy configuration
> 
>   - Patch 14: OPAL API calls
> 
>     We define three new API calls for handling the Shared Process Area and
>     setting OpenCAPI TL template capabilities.
> 
>   - Patch 15: mmio invalidates. Use MMIO registers to perform TLB
>     operations.
>    
>   - Patch 16: lpc memory support.
> 
> This series has been tested on a Rainier system with a HMS/Bono and
> TresHombres cards
> 
> Christophe Lombard (16):
>    opencapi5: move opal api
>    opencapi5: update npu3
>    opencapi5: introduce support
>    opencapi5: rainier detect device
>    opencapi5: assing bars
>    opencapi5: create phb
>    opencapi5: enabling opencapi
>    opencapi5: translation layer configuration
>    opencapi5: enable interrupt on error
>    opencapi5: complete phb ops
>    opencapi5: hmi scom dump
>    opencapi5: phy init
>    opencapi5: link training
>    opencapi5: add opal functions
>    opencapi5: mmio invalidates
>    opencapi5: Add support for OpenCAPI Persistent Memory devices.
> 
>   core/hmi.c                 |  263 +++--
>   core/init.c                |    3 +
>   core/pci-opal.c            |    9 +-
>   core/pci.c                 |    4 +-
>   hdata/spira.c              |  140 ++-
>   hdata/spira.h              |    2 +-
>   hw/Makefile.inc            |    2 +-
>   hw/npu-opal.c              |  113 ++
>   hw/npu2-common.c           |   30 +-
>   hw/npu2-opencapi.c         |   53 +-
>   hw/npu3.c                  |    4 +-
>   hw/pau-hw-procedures.c     |  310 ++++++
>   hw/pau.c                   | 2073 ++++++++++++++++++++++++++++++++++++
>   hw/phys-map.c              |   49 +-
>   include/npu2-regs.h        |    5 +
>   include/npu2.h             |   12 +-
>   include/pau-regs.h         |  223 ++++
>   include/pau.h              |  222 ++++
>   include/pci.h              |    1 +
>   include/phys-map.h         |    4 +
>   include/platform.h         |    9 +
>   include/skiboot.h          |    1 +
>   include/xscom-p10-regs.h   |   49 +
>   platforms/astbmc/rainier.c |  181 ++++
>   24 files changed, 3530 insertions(+), 232 deletions(-)
>   create mode 100644 hw/pau-hw-procedures.c
>   create mode 100644 hw/pau.c
>   create mode 100644 include/pau-regs.h
>   create mode 100644 include/pau.h
>