[Skiboot] [PATCH V3 13/15] pau: update current opal call functions
Christophe Lombard
clombard at linux.vnet.ibm.com
Fri Oct 15 02:57:02 AEDT 2021
Update the content of three current OPAL API calls to support PAU.
- OPAL_NPU_SPA_SETUP
The Shared Process Area (SPA) is a table containing one entry (a
"Process Element") per memory context which can be accessed by the
OpenCAPI device.
- OPAL_NPU_SPA_CLEAR_CACHE
The PAU keeps a cache of recently accessed memory contexts. When a
Process Element is removed from the SPA, the cache for the link must
be cleared.
- OPAL_NPU_TL_SET
The Transaction Layer specification defines several templates for
messages to be exchanged on the link. During link setup, the host
and device must negotiate what templates are supported on both sides
and at what rates those messages can be sent.
Signed-off-by: Christophe Lombard <clombard at linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat at linux.ibm.com>
---
hw/npu-opal.c | 11 ++++
hw/pau.c | 154 +++++++++++++++++++++++++++++++++++++++++++++
include/pau-regs.h | 13 ++++
include/pau.h | 7 +++
4 files changed, 185 insertions(+)
diff --git a/hw/npu-opal.c b/hw/npu-opal.c
index 73158b1c..cf136901 100644
--- a/hw/npu-opal.c
+++ b/hw/npu-opal.c
@@ -7,6 +7,7 @@
#include <pci.h>
#include <phb4.h>
#include <npu2.h>
+#include <pau.h>
#define TL_RATE_BUF_SIZE 32
@@ -184,6 +185,9 @@ static int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t bdfn,
if (phb->phb_type == phb_type_npu_v2_opencapi)
return npu2_opencapi_spa_setup(phb, bdfn, addr, PE_mask);
+ if (phb->phb_type == phb_type_pau_opencapi)
+ return pau_opencapi_spa_setup(phb, bdfn, addr, PE_mask);
+
return OPAL_PARAMETER;
}
opal_call(OPAL_NPU_SPA_SETUP, opal_npu_spa_setup, 4);
@@ -202,6 +206,9 @@ static int64_t opal_npu_spa_clear_cache(uint64_t phb_id, uint32_t bdfn,
if (phb->phb_type == phb_type_npu_v2_opencapi)
return npu2_opencapi_spa_clear_cache(phb, bdfn, PE_handle);
+ if (phb->phb_type == phb_type_pau_opencapi)
+ return pau_opencapi_spa_clear_cache(phb, bdfn, PE_handle);
+
return OPAL_PARAMETER;
}
opal_call(OPAL_NPU_SPA_CLEAR_CACHE, opal_npu_spa_clear_cache, 3);
@@ -222,6 +229,10 @@ static int64_t opal_npu_tl_set(uint64_t phb_id, uint32_t bdfn,
return npu2_opencapi_tl_set(phb, bdfn, capabilities,
rate);
+ if (phb->phb_type == phb_type_pau_opencapi)
+ return pau_opencapi_tl_set(phb, bdfn, capabilities,
+ rate);
+
return OPAL_PARAMETER;
}
opal_call(OPAL_NPU_TL_SET, opal_npu_tl_set, 5);
diff --git a/hw/pau.c b/hw/pau.c
index 8425567c..83cd6fe9 100644
--- a/hw/pau.c
+++ b/hw/pau.c
@@ -14,6 +14,9 @@
#define PAU_MAX_PE_NUM 16
#define PAU_RESERVED_PE_NUM 15
+#define PAU_TL_MAX_TEMPLATE 63
+#define PAU_TL_RATE_BUF_SIZE 32
+
#define PAU_SLOT_NORMAL PCI_SLOT_STATE_NORMAL
#define PAU_SLOT_LINK PCI_SLOT_STATE_LINK
#define PAU_SLOT_LINK_START (PAU_SLOT_LINK + 1)
@@ -265,6 +268,157 @@ static void pau_device_detect_fixup(struct pau_dev *dev)
dt_add_property_strings(dn, "ibm,pau-link-type", "unknown");
}
+int64_t pau_opencapi_spa_setup(struct phb *phb, uint32_t __unused bdfn,
+ uint64_t addr, uint64_t PE_mask)
+{
+ struct pau_dev *dev = pau_phb_to_opencapi_dev(phb);
+ struct pau *pau = dev->pau;
+ uint64_t reg, val;
+ int64_t rc;
+
+ lock(&pau->lock);
+
+ reg = PAU_XSL_OSL_SPAP_AN(dev->index);
+ val = pau_read(pau, reg);
+ if ((addr && (val & PAU_XSL_OSL_SPAP_AN_EN)) ||
+ (!addr && !(val & PAU_XSL_OSL_SPAP_AN_EN))) {
+ rc = OPAL_BUSY;
+ goto out;
+ }
+
+ /* SPA is disabled by passing a NULL address */
+ val = addr;
+ if (addr)
+ val = addr | PAU_XSL_OSL_SPAP_AN_EN;
+ pau_write(pau, reg, val);
+
+ /*
+ * set the PE mask that the OS uses for PASID -> PE handle
+ * conversion
+ */
+ reg = PAU_OTL_MISC_CFG0(dev->index);
+ val = pau_read(pau, reg);
+ val = SETFIELD(PAU_OTL_MISC_CFG0_PE_MASK, val, PE_mask);
+ pau_write(pau, reg, val);
+ rc = OPAL_SUCCESS;
+out:
+ unlock(&pau->lock);
+ return rc;
+}
+
+int64_t pau_opencapi_spa_clear_cache(struct phb *phb,
+ uint32_t __unused bdfn,
+ uint64_t PE_handle)
+{
+ struct pau_dev *dev = pau_phb_to_opencapi_dev(phb);
+ struct pau *pau = dev->pau;
+ uint64_t reg, val;
+ int64_t rc, retries = 5;
+
+ lock(&pau->lock);
+
+ reg = PAU_XSL_OSL_CCINV;
+ val = pau_read(pau, reg);
+ if (val & PAU_XSL_OSL_CCINV_PENDING) {
+ rc = OPAL_BUSY;
+ goto out;
+ }
+
+ val = PAU_XSL_OSL_CCINV_REMOVE;
+ val |= SETFIELD(PAU_XSL_OSL_CCINV_PE_HANDLE, val, PE_handle);
+ if (dev->index)
+ val |= PAU_XSL_OSL_CCINV_BRICK;
+ pau_write(pau, reg, val);
+
+ rc = OPAL_HARDWARE;
+ while (retries--) {
+ val = pau_read(pau, reg);
+ if (!(val & PAU_XSL_OSL_CCINV_PENDING)) {
+ rc = OPAL_SUCCESS;
+ break;
+ }
+ /* the bit expected to flip in less than 200us */
+ time_wait_us(200);
+ }
+out:
+ unlock(&pau->lock);
+ return rc;
+}
+
+static int pau_opencapi_get_templ_rate(unsigned int templ,
+ char *rate_buf)
+{
+ int shift, idx, val;
+
+ /*
+ * Each rate is encoded over 4 bits (0->15), with 15 being the
+ * slowest. The buffer is a succession of rates for all the
+ * templates. The first 4 bits are for template 63, followed
+ * by 4 bits for template 62, ... etc. So the rate for
+ * template 0 is at the very end of the buffer.
+ */
+ idx = (PAU_TL_MAX_TEMPLATE - templ) / 2;
+ shift = 4 * (1 - ((PAU_TL_MAX_TEMPLATE - templ) % 2));
+ val = rate_buf[idx] >> shift;
+ return val;
+}
+
+static bool pau_opencapi_is_templ_supported(unsigned int templ,
+ long capabilities)
+{
+ return !!(capabilities & (1ull << templ));
+}
+
+int64_t pau_opencapi_tl_set(struct phb *phb, uint32_t __unused bdfn,
+ long capabilities, char *rate_buf)
+{
+ struct pau_dev *dev = pau_phb_to_opencapi_dev(phb);
+ struct pau *pau;
+ uint64_t reg, val, templ_rate;
+ int i, rate_pos;
+
+ if (!dev)
+ return OPAL_PARAMETER;
+ pau = dev->pau;
+
+ /* The 'capabilities' argument defines what TL template the
+ * device can receive. OpenCAPI 5.0 defines 64 templates, so
+ * that's one bit per template.
+ *
+ * For each template, the device processing time may vary, so
+ * the device advertises at what rate a message of a given
+ * template can be sent. That's encoded in the 'rate' buffer.
+ *
+ * On P10, PAU only knows about TL templates 0 -> 3.
+ * Per the spec, template 0 must be supported.
+ */
+ if (!pau_opencapi_is_templ_supported(0, capabilities))
+ return OPAL_PARAMETER;
+
+ reg = PAU_OTL_MISC_CFG_TX(dev->index);
+ val = pau_read(pau, reg);
+ val &= ~PAU_OTL_MISC_CFG_TX_TEMP1_EN;
+ val &= ~PAU_OTL_MISC_CFG_TX_TEMP2_EN;
+ val &= ~PAU_OTL_MISC_CFG_TX_TEMP3_EN;
+
+ for (i = 0; i < 4; i++) {
+ /* Skip template 0 as it is implicitly enabled.
+ * Enable other template If supported by AFU
+ */
+ if (i && pau_opencapi_is_templ_supported(i, capabilities))
+ val |= PAU_OTL_MISC_CFG_TX_TEMP_EN(i);
+ /* The tx rate should still be set for template 0 */
+ templ_rate = pau_opencapi_get_templ_rate(i, rate_buf);
+ rate_pos = 8 + i * 4;
+ val = SETFIELD(PAU_OTL_MISC_CFG_TX_TEMP_RATE(rate_pos, rate_pos + 3),
+ val, templ_rate);
+ }
+ pau_write(pau, reg, val);
+ PAUDEVDBG(dev, "OTL configuration register set to %llx\n", val);
+
+ return OPAL_SUCCESS;
+}
+
#define CQ_CTL_STATUS_TIMEOUT 10 /* milliseconds */
static int pau_opencapi_set_fence_control(struct pau_dev *dev,
diff --git a/include/pau-regs.h b/include/pau-regs.h
index 7a5aaa5f..57c2d723 100644
--- a/include/pau-regs.h
+++ b/include/pau-regs.h
@@ -118,6 +118,7 @@
#define PAU_OTL_MISC_CFG0_EN PPC_BIT(0)
#define PAU_OTL_MISC_CFG0_BLOCK_PE_HANDLE PPC_BIT(1)
#define PAU_OTL_MISC_CFG0_BRICKID PPC_BITMASK(2, 3)
+#define PAU_OTL_MISC_CFG0_PE_MASK PPC_BITMASK(4, 7)
#define PAU_OTL_MISC_CFG0_ENABLE_4_0 PPC_BIT(51)
#define PAU_OTL_MISC_CFG0_XLATE_RELEASE PPC_BIT(62)
#define PAU_OTL_MISC_CFG0_ENABLE_5_0 PPC_BIT(63)
@@ -132,11 +133,16 @@
#define PAU_OTL_MISC_CFG_TLX_CREDITS_DCP2 PPC_BITMASK(48, 55)
#define PAU_OTL_MISC_CFG_TLX_CREDITS_DCP3 PPC_BITMASK(56, 63)
#define PAU_OTL_MISC_CFG_TX(brk) (PAU_BLOCK_OTL(brk) + 0x058)
+#define PAU_OTL_MISC_CFG_TX_TEMP1_EN PPC_BIT(1)
+#define PAU_OTL_MISC_CFG_TX_TEMP2_EN PPC_BIT(2)
+#define PAU_OTL_MISC_CFG_TX_TEMP3_EN PPC_BIT(3)
+#define PAU_OTL_MISC_CFG_TX_TEMP_EN(n) PPC_BIT(n)
#define PAU_OTL_MISC_CFG_TX_DRDY_WAIT PPC_BITMASK(5, 7)
#define PAU_OTL_MISC_CFG_TX_TEMP0_RATE PPC_BITMASK(8, 11)
#define PAU_OTL_MISC_CFG_TX_TEMP1_RATE PPC_BITMASK(12, 15)
#define PAU_OTL_MISC_CFG_TX_TEMP2_RATE PPC_BITMASK(16, 19)
#define PAU_OTL_MISC_CFG_TX_TEMP3_RATE PPC_BITMASK(20, 23)
+#define PAU_OTL_MISC_CFG_TX_TEMP_RATE(nib0, nib1) PPC_BITMASK(nib0, nib1)
#define PAU_OTL_MISC_CFG_TX_CRET_FREQ PPC_BITMASK(32, 34)
#define PAU_OTL_MISC_OTL_REM0(brk) (PAU_BLOCK_OTL(brk) + 0x068)
#define PAU_OTL_MISC_ERROR_SIG_RXI(brk) (PAU_BLOCK_OTL(brk) + 0x070)
@@ -150,11 +156,18 @@
#define PAU_OTL_MISC_PSL_PEHANDLE_AN(brk) (PAU_BLOCK_OTL_PSL(brk) + 0x018)
/* XSL block registers */
+#define PAU_XSL_OSL_SPAP_AN(brk) (PAU_BLOCK_XSL + 0x000 + (brk) * 8)
+#define PAU_XSL_OSL_SPAP_AN_EN PPC_BIT(63)
#define PAU_XSL_WRAP_CFG (PAU_BLOCK_XSL + 0x100)
#define PAU_XSL_WRAP_CFG_CLOCK_ENABLE PPC_BIT(0)
#define PAU_XSL_OSL_XLATE_CFG(brk) (PAU_BLOCK_XSL + 0x040 + (brk) * 8)
#define PAU_XSL_OSL_XLATE_CFG_AFU_DIAL PPC_BIT(0)
#define PAU_XSL_OSL_XLATE_CFG_OPENCAPI3 PPC_BIT(32)
+#define PAU_XSL_OSL_CCINV (PAU_BLOCK_XSL + 0x070)
+#define PAU_XSL_OSL_CCINV_REMOVE PPC_BIT(15)
+#define PAU_XSL_OSL_CCINV_PENDING PPC_BIT(16)
+#define PAU_XSL_OSL_CCINV_BRICK PPC_BIT(47)
+#define PAU_XSL_OSL_CCINV_PE_HANDLE PPC_BITMASK(48, 62)
/* XTS block registers */
#define PAU_XTS_CFG (PAU_BLOCK_PAU_XTS + 0x020)
diff --git a/include/pau.h b/include/pau.h
index c0a09401..894007d0 100644
--- a/include/pau.h
+++ b/include/pau.h
@@ -200,6 +200,13 @@ static inline uint64_t pau_read(struct pau *pau, uint64_t reg)
}
void pau_opencapi_dump_scoms(struct pau *pau);
+int64_t pau_opencapi_spa_setup(struct phb *phb, uint32_t __unused bdfn,
+ uint64_t addr, uint64_t PE_mask);
+int64_t pau_opencapi_spa_clear_cache(struct phb *phb,
+ uint32_t __unused bdfn,
+ uint64_t PE_handle);
+int64_t pau_opencapi_tl_set(struct phb *phb, uint32_t __unused bdfn,
+ long capabilities, char *rate_buf);
/* PHY */
int pau_dev_phy_reset(struct pau_dev *dev);
--
2.31.1
More information about the Skiboot
mailing list