[Skiboot] [PATCH v2 01/11] xive/p9: Introduce XIVE_INT_ORDER
Cédric Le Goater
clg at kaod.org
Fri Jun 12 21:37:22 AEST 2020
The size of the interrupt number space is constrained by the block and
index fields of the trigger data exchanged between source units and
the XIVE IC. These are respectively 4 and 28 bits, which gives us a 32
bits interrupt number space. But the XICS emulation requires 8 bits to
encode the CPPR value. The system interrupt number space is therefore
constrained to 24 bits and on a chip, to 20 bits because the XIVE
driver configures the HW to use one block per chip.
XIVE_INT_ORDER defines the size of the interrupt number space : 1M per
chip.
To control these interrupts, the driver defines in the VC BAR of the
controller a range of 384G of ESB pages giving access to 3M interrupts.
The VSD for the memory table is smaller than the index and accesses to
some ESB pages are not backed by a memory table structure. If such an
access occurred, it would result in a FIR.
It never happened but this is something to fix with a finer configuration
of the VC BAR.
Signed-off-by: Cédric Le Goater <clg at kaod.org>
---
hw/xive.c | 34 ++++++++++++++++++++--------------
1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/hw/xive.c b/hw/xive.c
index 9c9123fb6f3c..68504cc3b7c7 100644
--- a/hw/xive.c
+++ b/hw/xive.c
@@ -146,18 +146,24 @@
* so we could potentially make the IVT size twice as big, but for now
* we will simply share it and ensure we don't hand out IPIs that
* overlap the HW interrupts.
+ *
+ * TODO: adjust the VC BAR range for IPI ESBs on this value
*/
-#define MAX_INT_ENTRIES (1 * 1024 * 1024)
+
+#define XIVE_INT_ORDER 20 /* 1M interrupts */
+#define XIVE_INT_COUNT (1ul << XIVE_INT_ORDER)
/*
* First interrupt number, also the first logical interrupt number
- * allocated by Linux
+ * allocated by Linux (the first numbers are reserved for ISA)
*/
#define XIVE_INT_FIRST 0x10
/* Corresponding direct table sizes */
-#define SBE_SIZE (MAX_INT_ENTRIES / 4)
-#define IVT_SIZE (MAX_INT_ENTRIES * 8)
+
+#define SBE_PER_BYTE 4 /* PQ bits couples */
+#define SBE_SIZE (XIVE_INT_COUNT / SBE_PER_BYTE)
+#define IVT_SIZE (XIVE_INT_COUNT * sizeof(struct xive_ive))
/* Max number of EQs. We allocate an indirect table big enough so
* that when fully populated we can have that many EQs.
@@ -376,7 +382,7 @@ struct xive {
* and partially populated.
*
* Currently, the ESB/SBE and the EAS/IVT tables are direct and
- * fully pre-allocated based on MAX_INT_ENTRIES.
+ * fully pre-allocated based on XIVE_INT_COUNT.
*
* The other tables are indirect, we thus pre-allocate the indirect
* table (ie, pages of pointers) and populate enough of the pages
@@ -760,7 +766,7 @@ static struct xive_ive *xive_get_ive(struct xive *x, unsigned int isn)
xive_err(x, "xive_get_ive, ISN 0x%x not on right chip\n", isn);
return NULL;
}
- assert (idx < MAX_INT_ENTRIES);
+ assert (idx < XIVE_INT_COUNT);
/* If we support >1 block per chip, this should still work as
* we are likely to make the table contiguous anyway
@@ -1624,7 +1630,7 @@ static bool xive_prealloc_tables(struct xive *x)
}
/* SBEs are initialized to 0b01 which corresponds to "ints off" */
memset(x->sbe_base, 0x55, SBE_SIZE);
- xive_dbg(x, "SBE at %p size 0x%x\n", x->sbe_base, SBE_SIZE);
+ xive_dbg(x, "SBE at %p size 0x%lx\n", x->sbe_base, SBE_SIZE);
/* EAS/IVT entries are 8 bytes */
x->ivt_base = local_alloc(x->chip_id, IVT_SIZE, IVT_SIZE);
@@ -1636,7 +1642,7 @@ static bool xive_prealloc_tables(struct xive *x)
* when actually used
*/
memset(x->ivt_base, 0, IVT_SIZE);
- xive_dbg(x, "IVT at %p size 0x%x\n", x->ivt_base, IVT_SIZE);
+ xive_dbg(x, "IVT at %p size 0x%lx\n", x->ivt_base, IVT_SIZE);
/* Indirect EQ table. (XXX Align to 64K until I figure out the
* HW requirements)
@@ -2595,7 +2601,7 @@ static struct xive *init_one_xive(struct dt_node *np)
* so that HW sources land outside of ESB space...
*/
x->int_base = BLKIDX_TO_GIRQ(x->block_id, 0);
- x->int_max = x->int_base + MAX_INT_ENTRIES;
+ x->int_max = x->int_base + XIVE_INT_COUNT;
x->int_hw_bot = x->int_max;
x->int_ipi_top = x->int_base;
@@ -2611,9 +2617,9 @@ static struct xive *init_one_xive(struct dt_node *np)
/* Make sure we don't hand out 0 */
bitmap_set_bit(*x->eq_map, 0);
- x->int_enabled_map = zalloc(BITMAP_BYTES(MAX_INT_ENTRIES));
+ x->int_enabled_map = zalloc(BITMAP_BYTES(XIVE_INT_COUNT));
assert(x->int_enabled_map);
- x->ipi_alloc_map = zalloc(BITMAP_BYTES(MAX_INT_ENTRIES));
+ x->ipi_alloc_map = zalloc(BITMAP_BYTES(XIVE_INT_COUNT));
assert(x->ipi_alloc_map);
xive_dbg(x, "Handling interrupts [%08x..%08x]\n",
@@ -3382,7 +3388,7 @@ static bool check_misrouted_ipi(struct cpu_thread *me, uint32_t irq)
if (!x)
continue;
ive = x->ivt_base;
- for (i = 0; i < MAX_INT_ENTRIES; i++) {
+ for (i = 0; i < XIVE_INT_COUNT; i++) {
if (xive_get_field64(IVE_EQ_DATA, ive[i].w) == irq) {
eq_blk = xive_get_field64(IVE_EQ_BLOCK, ive[i].w);
eq_idx = xive_get_field64(IVE_EQ_INDEX, ive[i].w);
@@ -4397,7 +4403,7 @@ static void xive_reset_one(struct xive *x)
lock(&x->lock);
/* Check all interrupts are disabled */
- i = bitmap_find_one_bit(*x->int_enabled_map, 0, MAX_INT_ENTRIES);
+ i = bitmap_find_one_bit(*x->int_enabled_map, 0, XIVE_INT_COUNT);
if (i >= 0)
xive_warn(x, "Interrupt %d (and maybe more) not disabled"
" at reset !\n", i);
@@ -4405,7 +4411,7 @@ static void xive_reset_one(struct xive *x)
/* Reset IPI allocation */
xive_dbg(x, "freeing alloc map %p/%p\n",
x->ipi_alloc_map, *x->ipi_alloc_map);
- memset(x->ipi_alloc_map, 0, BITMAP_BYTES(MAX_INT_ENTRIES));
+ memset(x->ipi_alloc_map, 0, BITMAP_BYTES(XIVE_INT_COUNT));
xive_dbg(x, "Resetting EQs...\n");
--
2.25.4
More information about the Skiboot
mailing list