[Skiboot] [RESEND PATCH v2 2/4] Self save API integration
Pratik Rajesh Sampat
psampat at linux.ibm.com
Fri Jan 10 22:50:41 AEDT 2020
The commit makes the self save API available outside the firmware by defining
an OPAL wrapper.
This wrapper has a similar interface to that of self restore and expects the
cpu pir, SPR number, minus the value of that SPR to be passed in its
paramters and returns OPAL_SUCCESS on success.
Signed-off-by: Pratik Rajesh Sampat <psampat at linux.ibm.com>
---
doc/opal-api/opal-slw-self-save-reg-176.rst | 33 ++++++++
hw/slw.c | 89 +++++++++++++++++++++
include/opal-api.h | 3 +-
include/p9_stop_api.H | 17 ++++
include/skiboot.h | 3 +
5 files changed, 144 insertions(+), 1 deletion(-)
create mode 100644 doc/opal-api/opal-slw-self-save-reg-176.rst
diff --git a/doc/opal-api/opal-slw-self-save-reg-176.rst b/doc/opal-api/opal-slw-self-save-reg-176.rst
new file mode 100644
index 00000000..6a4e1a5f
--- /dev/null
+++ b/doc/opal-api/opal-slw-self-save-reg-176.rst
@@ -0,0 +1,33 @@
+.. OPAL_SLW_SELF_SAVE_REG:
+
+OPAL_SLW_SELF_SAVE_REG
+======================
+
+.. code-block:: c
+
+ #define OPAL_SLW_SELF_SAVE_REG 176
+
+ int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
+
+:ref:`OPAL_SLW_SELF_SAVE_REG` is used to inform low-level firmware to save
+the current contents of the SPR before entering a state of loss and
+also restore the content back on waking up from a deep stop state.
+
+Parameters
+----------
+
+``uint64_t cpu_pir``
+ This parameter specifies the pir of the cpu for which the call is being made.
+``uint64_t sprn``
+ This parameter specifies the spr number as mentioned in p9_stop_api.H for
+ Power9 and p8_pore_table_gen_api.H for Power8.
+
+Returns
+-------
+
+:ref:`OPAL_UNSUPPORTED`
+ If spr restore is not supported by pore engine.
+:ref:`OPAL_PARAMETER`
+ Invalid handle for the pir/chip
+:ref:`OPAL_SUCCESS`
+ On success
\ No newline at end of file
diff --git a/hw/slw.c b/hw/slw.c
index 566a1128..14dbce47 100644
--- a/hw/slw.c
+++ b/hw/slw.c
@@ -35,6 +35,43 @@ static bool slw_current_le = false;
enum wakeup_engine_states wakeup_engine_state = WAKEUP_ENGINE_NOT_PRESENT;
bool has_deep_states = false;
+/**
+ * The struct and SPR list is partially consistent with libpore/p9_stop_api.c
+ */
+/**
+ * @brief summarizes attributes associated with a SPR register.
+ */
+typedef struct
+{
+ uint32_t iv_sprId;
+ bool iv_isThreadScope;
+ uint32_t iv_saveMaskPos;
+
+} StopSprReg_t;
+
+/**
+ * @brief a true in the table below means register is of scope thread
+ * whereas a false meanse register is of scope core.
+ * The number is the bit position on a uint32_t mask
+ */
+
+static const StopSprReg_t g_sprRegister[] =
+{
+ { P9_STOP_SPR_DAWR, true, 1 },
+ { P9_STOP_SPR_HSPRG0, true, 3 },
+ { P9_STOP_SPR_LDBAR, true, 4, },
+ { P9_STOP_SPR_LPCR, true, 5 },
+ { P9_STOP_SPR_PSSCR, true, 6 },
+ { P9_STOP_SPR_MSR, true, 7 },
+ { P9_STOP_SPR_HRMOR, false, 255 },
+ { P9_STOP_SPR_HID, false, 21 },
+ { P9_STOP_SPR_HMEER, false, 22 },
+ { P9_STOP_SPR_PMCR, false, 23 },
+ { P9_STOP_SPR_PTCR, false, 24 },
+};
+
+static const uint32_t MAX_SPR_SUPPORTED = ARRAY_SIZE(g_sprRegister);
+
DEFINE_LOG_ENTRY(OPAL_RC_SLW_INIT, OPAL_PLATFORM_ERR_EVT, OPAL_SLW,
OPAL_PLATFORM_FIRMWARE, OPAL_PREDICTIVE_ERR_GENERAL,
OPAL_NA);
@@ -1446,6 +1483,58 @@ int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val)
opal_call(OPAL_SLW_SET_REG, opal_slw_set_reg, 3);
+int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn)
+{
+ struct cpu_thread * c = find_cpu_by_pir(cpu_pir);
+ struct proc_chip * chip;
+ int rc;
+ int index;
+ uint32_t save_reg_vector = 0;
+
+ if (!c) {
+ prlog(PR_DEBUG, "SLW: Unknown thread with pir %x\n",
+ (u32) cpu_pir);
+ return OPAL_PARAMETER;
+ }
+
+ chip = get_chip(c->chip_id);
+ if (!chip) {
+ prlog(PR_DEBUG, "SLW: Unknown chip for thread with pir %x\n",
+ (u32) cpu_pir);
+ return OPAL_PARAMETER;
+ }
+ if (proc_gen != proc_gen_p9 || !has_deep_states) {
+ prlog(PR_DEBUG, "SLW: Does not support deep states\n");
+ return OPAL_UNSUPPORTED;
+ }
+ if (wakeup_engine_state != WAKEUP_ENGINE_PRESENT) {
+ log_simple_error(&e_info(OPAL_RC_SLW_REG),
+ "SLW: wakeup_engine in bad state=%d chip=%x\n",
+ wakeup_engine_state, chip->id);
+ return OPAL_INTERNAL_ERROR;
+ }
+ for (index = 0; index < MAX_SPR_SUPPORTED; ++index) {
+ if (sprn == (CpuReg_t) g_sprRegister[index].iv_sprId) {
+ save_reg_vector = PPC_BIT32(
+ g_sprRegister[index].iv_saveMaskPos);
+ break;
+ }
+ }
+ if (save_reg_vector == 0)
+ return OPAL_INTERNAL_ERROR;
+ rc = p9_stop_save_cpureg_control((void *) chip->homer_base,
+ cpu_pir, save_reg_vector);
+
+ if (rc) {
+ log_simple_error(&e_info(OPAL_RC_SLW_REG),
+ "SLW: Failed to save vector %x for CPU %x\n",
+ save_reg_vector, c->pir);
+ return OPAL_INTERNAL_ERROR;
+ }
+ return OPAL_SUCCESS;
+}
+opal_call(OPAL_SLW_SELF_SAVE_REG, opal_slw_self_save_reg, 2);
+
void slw_init(void)
{
struct proc_chip *chip;
diff --git a/include/opal-api.h b/include/opal-api.h
index d92ecf54..af2c2476 100644
--- a/include/opal-api.h
+++ b/include/opal-api.h
@@ -227,7 +227,8 @@
#define OPAL_SECVAR_ENQUEUE_UPDATE 178
#define OPAL_PHB_SET_OPTION 179
#define OPAL_PHB_GET_OPTION 180
-#define OPAL_LAST 180
+#define OPAL_SLW_SELF_SAVE_REG 181
+#define OPAL_LAST 181
#define QUIESCE_HOLD 1 /* Spin all calls at entry */
#define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */
diff --git a/include/p9_stop_api.H b/include/p9_stop_api.H
index 9d3bc1e5..c304f70f 100644
--- a/include/p9_stop_api.H
+++ b/include/p9_stop_api.H
@@ -34,6 +34,8 @@
///
/// @file p9_stop_api.H
/// @brief describes STOP API which create/manipulate STOP image.
+/// This header need not be consistent, however is a subset of the
+/// libpore/p9_stop_api.H counterpart
///
// *HWP HW Owner : Greg Still <stillgs at us.ibm.com>
// *HWP FW Owner : Prem Shanker Jha <premjha2 at in.ibm.com>
@@ -58,6 +60,7 @@ typedef enum
P9_STOP_SPR_HRMOR = 313, // core register
P9_STOP_SPR_LPCR = 318, // thread register
P9_STOP_SPR_HMEER = 337, // core register
+ P9_STOP_SPR_PTCR = 464, // core register
P9_STOP_SPR_LDBAR = 850, // thread register
P9_STOP_SPR_PSSCR = 855, // thread register
P9_STOP_SPR_PMCR = 884, // core register
@@ -230,6 +233,20 @@ StopReturnCode_t p9_stop_save_scom( void* const i_pImage,
const ScomOperation_t i_operation,
const ScomSection_t i_section );
+/**
+ * @brief Facilitates self save and restore of a list of SPRs of a thread.
+ * @param[in] i_pImage points to the start of HOMER image of P9 chip.
+ * @param[in] i_pir PIR associated with thread
+ * @param[in] i_saveRegVector bit vector representing SPRs that needs to be restored.
+ * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise.
+ * @note SPR save vector is a bit vector. For each SPR supported,
+ * there is an associated bit position in the bit vector.Refer
+ * to definition of SprBitPositionList_t to determine bit position
+ * associated with a particular SPR.
+ */
+StopReturnCode_t
+p9_stop_save_cpureg_control( void* i_pImage, const uint64_t i_pir,
+ const uint32_t i_saveRegVector );
#ifdef __cplusplus
} // extern "C"
}; // namespace stopImageSection ends
diff --git a/include/skiboot.h b/include/skiboot.h
index e9d57dec..1ed8464e 100644
--- a/include/skiboot.h
+++ b/include/skiboot.h
@@ -306,6 +306,9 @@ extern void nx_p9_rng_late_init(void);
/* SLW reinit function for switching core settings */
extern int64_t slw_reinit(uint64_t flags);
+/* Self save SPR before entering the stop state */
+extern int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
+
/* Patch SPR in SLW image */
extern int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
--
2.24.1
More information about the Skiboot
mailing list