[Skiboot] [PATCH v5 4/4] Advertise the self-save and self-restore attributes in the device tree
Pratik Rajesh Sampat
psampat at linux.ibm.com
Mon Feb 24 22:35:08 AEDT 2020
Support for self save and self restore interface is advertised in the
device tree, along with the list of SPRs it supports for each.
The Special Purpose Register identification is encoded in a 2048 bitmask
structure, where each bit signifies the identification key of that SPR
which is consistent with that of the POWER architecture set for that
register.
Signed-off-by: Pratik Rajesh Sampat <psampat at linux.ibm.com>
---
.../ibm,opal/power-mgt/self-restore.rst | 25 ++++
.../ibm,opal/power-mgt/self-save.rst | 25 ++++
hw/slw.c | 112 ++++++++++++++++++
include/skiboot.h | 1 +
4 files changed, 163 insertions(+)
create mode 100644 doc/device-tree/ibm,opal/power-mgt/self-restore.rst
create mode 100644 doc/device-tree/ibm,opal/power-mgt/self-save.rst
diff --git a/doc/device-tree/ibm,opal/power-mgt/self-restore.rst b/doc/device-tree/ibm,opal/power-mgt/self-restore.rst
new file mode 100644
index 00000000..2b2e62fe
--- /dev/null
+++ b/doc/device-tree/ibm,opal/power-mgt/self-restore.rst
@@ -0,0 +1,25 @@
+ibm,opal/power-mgt/self-restore device tree entries
+===================================================
+
+This node exports the bitmask representing the special purpose registers that
+the self-restore API currently supports.
+
+Example:
+
+.. code-block:: dts
+
+ self-restore {
+ sprn-bitmask = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x42010000 0x0 0x0
+ 0x20000 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x100000 0x900000 0x0 0x0 0x530000 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x10000>;
+ phandle = <0x1c7>;
+ };
+
+sprn-bitmask
+------------
+
+This property is a bitmask of of all the existing SPRs and if the SPR is
+supported, the corresponding bit of the SPR number is set to 1.
diff --git a/doc/device-tree/ibm,opal/power-mgt/self-save.rst b/doc/device-tree/ibm,opal/power-mgt/self-save.rst
new file mode 100644
index 00000000..450c56dd
--- /dev/null
+++ b/doc/device-tree/ibm,opal/power-mgt/self-save.rst
@@ -0,0 +1,25 @@
+ibm,opal/power-mgt/self-save device tree entries
+===================================================
+
+This node exports the bitmask representing the special purpose registers that
+the self-save API currently supports.
+
+Example:
+
+.. code-block:: dts
+
+ self-save {
+ sprn-bitmask = <0x0 0x0 0x0 0x0 0x100000 0x0 0x0 0x0 0x42010000 0x0 0x0
+ 0x20000 0x0 0x0 0x0 0x10000 0x0 0x0 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x100000 0x840000 0x0 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x10000>;
+ phandle = <0x1c8>;
+ };
+
+sprn-bitmask
+------------
+
+This property is a bitmask of of all the existing SPRs and if the SPR is
+supported, the corresponding bit of the SPR number is set to 1.
diff --git a/hw/slw.c b/hw/slw.c
index 0e92adaa..333f15f2 100644
--- a/hw/slw.c
+++ b/hw/slw.c
@@ -29,6 +29,7 @@
#include <sbe_xip_image.h>
static uint32_t slw_saved_reset[0x100];
+#define SPR_BITMAP_LENGTH 2048
static bool slw_current_le = false;
@@ -750,6 +751,115 @@ static void slw_late_init_p9(struct proc_chip *chip)
}
}
+/* Add device tree properties to determine self-save | restore */
+void add_cpu_self_save_properties(void)
+{
+ struct dt_node *self_restore, *self_save, *power_mgt;
+ uint64_t *self_save_mask, *self_restore_mask;
+ bool self_save_supported = true;
+ uint64_t compVector = -1;
+ struct proc_chip *chip;
+ int i, rc;
+
+ const uint64_t self_restore_regs[] = {
+ P8_SPR_HRMOR,
+ P8_SPR_HMEER,
+ P8_SPR_PMICR,
+ P8_SPR_PMCR,
+ P8_SPR_HID0,
+ P8_SPR_HID1,
+ P8_SPR_HID4,
+ P8_SPR_HID5,
+ P8_SPR_HSPRG0,
+ P8_SPR_LPCR,
+ P9_STOP_SPR_PSSCR,
+ P8_MSR_MSR
+ };
+
+ const uint64_t self_save_regs[] = {
+ P9_STOP_SPR_DAWR,
+ P9_STOP_SPR_HSPRG0,
+ P9_STOP_SPR_LDBAR,
+ P9_STOP_SPR_LPCR,
+ P9_STOP_SPR_PSSCR,
+ P9_STOP_SPR_MSR,
+ P9_STOP_SPR_HRMOR,
+ P9_STOP_SPR_HMEER,
+ P9_STOP_SPR_PMCR,
+ P9_STOP_SPR_PTCR
+ };
+
+ chip = next_chip(NULL);
+ assert(chip);
+ rc = proc_stop_api_discover_capability((void *) chip->homer_base,
+ &compVector);
+ if (rc == STOP_SAVE_ARG_INVALID_IMG) {
+ prlog(PR_DEBUG, "HOMER BASE INVALID\n");
+ return;
+ } else if (rc == STOP_SAVE_API_IMG_INCOMPATIBLE) {
+ prlog(PR_DEBUG, "STOP API running incompatible versions\n");
+ if ((compVector & SELF_RESTORE_VER_MISMATCH) == 0) {
+ prlog(PR_DEBUG, "Self-save API unsupported\n");
+ self_save_supported = false;
+ }
+ }
+
+ power_mgt = dt_find_by_path(dt_root, "/ibm,opal/power-mgt");
+ if (!power_mgt) {
+ prerror("OCC: dt node /ibm,opal/power-mgt not found\n");
+ return;
+ }
+
+ self_restore = dt_new(power_mgt, "self-restore");
+ if (!self_restore) {
+ prerror("OCC: Failed to create self restore node");
+ return;
+ }
+
+ self_restore_mask = zalloc(SPR_BITMAP_LENGTH / 8);
+ if (!self_restore_mask)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(self_restore_regs); i++) {
+ int bitmask_idx = self_restore_regs[i] / 64;
+ uint64_t bitmask_pos = self_restore_regs[i] % 64;
+ self_restore_mask[bitmask_idx] |= 1ul << bitmask_pos;
+ }
+ for (i = 0; i < (SPR_BITMAP_LENGTH / 64); i++) {
+ self_restore_mask[i] = be64_to_cpu(self_restore_mask[i]);
+ }
+
+ dt_add_property(self_restore, "sprn-bitmask", self_restore_mask,
+ SPR_BITMAP_LENGTH / 8);
+ free(self_restore_mask);
+
+ if (proc_gen != proc_gen_p9 || !self_save_supported)
+ return;
+
+ self_save = dt_new(power_mgt, "self-save");
+ if (!self_save) {
+ prerror("OCC: Failed to create self save node");
+ return;
+ }
+
+ self_save_mask = zalloc(SPR_BITMAP_LENGTH / 8);
+ if (!self_save_mask)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(self_save_regs); i++) {
+ int bitmask_idx = self_save_regs[i] / 64;
+ uint64_t bitmask_pos = self_save_regs[i] % 64;
+ self_save_mask[bitmask_idx] |= 1ul << bitmask_pos;
+ }
+ for (i = 0; i < (SPR_BITMAP_LENGTH / 64); i++) {
+ self_save_mask[i] = be64_to_cpu(self_save_mask[i]);
+ }
+
+ dt_add_property(self_save, "sprn-bitmask", self_save_mask,
+ SPR_BITMAP_LENGTH / 8);
+ free(self_save_mask);
+}
+
/* Add device tree properties to describe idle states */
void add_cpu_idle_state_properties(void)
{
@@ -1563,4 +1673,6 @@ void slw_init(void)
}
}
add_cpu_idle_state_properties();
+ if (has_deep_states)
+ add_cpu_self_save_properties();
}
diff --git a/include/skiboot.h b/include/skiboot.h
index 072ce589..676211ad 100644
--- a/include/skiboot.h
+++ b/include/skiboot.h
@@ -209,6 +209,7 @@ extern void early_uart_init(void);
extern void homer_init(void);
extern void slw_init(void);
extern void add_cpu_idle_state_properties(void);
+extern void add_cpu_self_save_properties(void);
extern void lpc_rtc_init(void);
/* flash support */
--
2.24.1
More information about the Skiboot
mailing list