[Skiboot] [PATCH v8 1/1] powerpc/powernv: Introduce support and parsing for self-save API
Gautham R Shenoy
ego at linux.vnet.ibm.com
Fri Apr 24 04:15:23 AEST 2020
On Thu, Apr 23, 2020 at 04:25:57PM +0530, Pratik Rajesh Sampat wrote:
> This commit introduces and leverages the Self save API. The difference
> between self-save and self-restore is that the value to be saved for the
> SPR does not need to be passed to the call.
>
> Add the new Self Save OPAL API call in the list of OPAL calls.
>
> The device tree is parsed looking for the property "ibm,opal-self-save"
> If self-save is supported then for all SPRs self-save is invoked for all
> P9 supported registers. In the case self-save fails corresponding
> self-restore call is invoked as a fallback.
>
> Signed-off-by: Pratik Rajesh Sampat <psampat at linux.ibm.com>
A suggestion from the bisectability point of view though.
Since in this patch you are also invoking self_save API for a new SPR,
namely PTCR which was previously not present, I would suggest that you
move the PTCR changes to a different patch.
Otherwise, the patchset looks good to me
Reviewed-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/opal-api.h | 3 +-
> arch/powerpc/include/asm/opal.h | 1 +
> arch/powerpc/platforms/powernv/idle.c | 73 ++++++++++++++++++----
> arch/powerpc/platforms/powernv/opal-call.c | 1 +
> 4 files changed, 64 insertions(+), 14 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
> index 1dffa3cb16ba..7ba698369083 100644
> --- a/arch/powerpc/include/asm/opal-api.h
> +++ b/arch/powerpc/include/asm/opal-api.h
> @@ -214,7 +214,8 @@
> #define OPAL_SECVAR_GET 176
> #define OPAL_SECVAR_GET_NEXT 177
> #define OPAL_SECVAR_ENQUEUE_UPDATE 178
> -#define OPAL_LAST 178
> +#define OPAL_SLW_SELF_SAVE_REG 181
> +#define OPAL_LAST 181
>
> #define QUIESCE_HOLD 1 /* Spin all calls at entry */
> #define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index 9986ac34b8e2..a370b0e8d899 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -204,6 +204,7 @@ int64_t opal_handle_hmi2(__be64 *out_flags);
> int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
> int64_t opal_unregister_dump_region(uint32_t id);
> int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
> +int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
> int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag);
> int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
> int64_t opal_pci_get_pbcq_tunnel_bar(uint64_t phb_id, uint64_t *addr);
> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> index 78599bca66c2..ada7ece24521 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -32,6 +32,11 @@
> #define P9_STOP_SPR_MSR 2000
> #define P9_STOP_SPR_PSSCR 855
>
> +/* Caching the self-save functionality, lpcr, ptcr support */
> +DEFINE_STATIC_KEY_FALSE(self_save_available);
> +DEFINE_STATIC_KEY_FALSE(is_lpcr_self_save);
> +DEFINE_STATIC_KEY_FALSE(is_ptcr_self_save);
> +
> static u32 supported_cpuidle_states;
> struct pnv_idle_states_t *pnv_idle_states;
> int nr_pnv_idle_states;
> @@ -61,6 +66,35 @@ static bool deepest_stop_found;
>
> static unsigned long power7_offline_type;
>
> +/*
> + * Cache support for SPRs that support self-save as well as kernel save restore
> + * so that kernel does not duplicate efforts in saving and restoring SPRs
> + */
> +static void cache_spr_self_save_support(u64 sprn)
> +{
> + switch (sprn) {
> + case SPRN_LPCR:
> + static_branch_enable(&is_lpcr_self_save);
> + break;
> + case SPRN_PTCR:
> + static_branch_enable(&is_ptcr_self_save);
> + break;
> + }
> +}
> +
> +static int pnv_save_one_spr(u64 pir, u64 sprn, u64 val)
> +{
> + if (static_branch_likely(&self_save_available)) {
> + int rc = opal_slw_self_save_reg(pir, sprn);
> +
> + if (!rc) {
> + cache_spr_self_save_support(sprn);
> + return rc;
> + }
> + }
> + return opal_slw_set_reg(pir, sprn, val);
> +}
> +
> static int pnv_save_sprs_for_deep_states(void)
> {
> int cpu;
> @@ -72,6 +106,7 @@ static int pnv_save_sprs_for_deep_states(void)
> * same across all cpus.
> */
> uint64_t lpcr_val = mfspr(SPRN_LPCR);
> + uint64_t ptcr_val = mfspr(SPRN_PTCR);
> uint64_t hid0_val = mfspr(SPRN_HID0);
> uint64_t hid1_val = mfspr(SPRN_HID1);
> uint64_t hid4_val = mfspr(SPRN_HID4);
> @@ -84,30 +119,34 @@ static int pnv_save_sprs_for_deep_states(void)
> uint64_t pir = get_hard_smp_processor_id(cpu);
> uint64_t hsprg0_val = (uint64_t)paca_ptrs[cpu];
>
> - rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
> + rc = pnv_save_one_spr(pir, SPRN_HSPRG0, hsprg0_val);
> if (rc != 0)
> return rc;
>
> - rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> + rc = pnv_save_one_spr(pir, SPRN_LPCR, lpcr_val);
> if (rc != 0)
> return rc;
>
> + /*
> + * No need to check for failure, if firmware fails to save then
> + * kernel handles save-restore for PTCR
> + */
> + pnv_save_one_spr(pir, SPRN_PTCR, ptcr_val);
> +
> if (cpu_has_feature(CPU_FTR_ARCH_300)) {
> - rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, msr_val);
> + rc = pnv_save_one_spr(pir, P9_STOP_SPR_MSR, msr_val);
> if (rc)
> return rc;
>
> - rc = opal_slw_set_reg(pir,
> + rc = pnv_save_one_spr(pir,
> P9_STOP_SPR_PSSCR, psscr_val);
> -
> if (rc)
> return rc;
> }
>
> /* HIDs are per core registers */
> if (cpu_thread_in_core(cpu) == 0) {
> -
> - rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
> + rc = pnv_save_one_spr(pir, SPRN_HMEER, hmeer_val);
> if (rc != 0)
> return rc;
>
> @@ -658,7 +697,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
> mmcr0 = mfspr(SPRN_MMCR0);
> }
> if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) {
> - sprs.lpcr = mfspr(SPRN_LPCR);
> + if (!static_branch_unlikely(&is_lpcr_self_save))
> + sprs.lpcr = mfspr(SPRN_LPCR);
> sprs.hfscr = mfspr(SPRN_HFSCR);
> sprs.fscr = mfspr(SPRN_FSCR);
> sprs.pid = mfspr(SPRN_PID);
> @@ -672,7 +712,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
> sprs.mmcr1 = mfspr(SPRN_MMCR1);
> sprs.mmcr2 = mfspr(SPRN_MMCR2);
>
> - sprs.ptcr = mfspr(SPRN_PTCR);
> + if (!static_branch_unlikely(&is_ptcr_self_save))
> + sprs.ptcr = mfspr(SPRN_PTCR);
> sprs.rpr = mfspr(SPRN_RPR);
> sprs.tscr = mfspr(SPRN_TSCR);
> if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
> @@ -756,7 +797,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
> goto core_woken;
>
> /* Per-core SPRs */
> - mtspr(SPRN_PTCR, sprs.ptcr);
> + if (!static_branch_unlikely(&is_ptcr_self_save))
> + mtspr(SPRN_PTCR, sprs.ptcr);
> mtspr(SPRN_RPR, sprs.rpr);
> mtspr(SPRN_TSCR, sprs.tscr);
>
> @@ -777,7 +819,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
> atomic_unlock_and_stop_thread_idle();
>
> /* Per-thread SPRs */
> - mtspr(SPRN_LPCR, sprs.lpcr);
> + if (!static_branch_unlikely(&is_lpcr_self_save))
> + mtspr(SPRN_LPCR, sprs.lpcr);
> mtspr(SPRN_HFSCR, sprs.hfscr);
> mtspr(SPRN_FSCR, sprs.fscr);
> mtspr(SPRN_PID, sprs.pid);
> @@ -956,8 +999,10 @@ void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val)
> * Program the LPCR via stop-api only if the deepest stop state
> * can lose hypervisor context.
> */
> - if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT)
> - opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> + if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) {
> + if (!static_branch_unlikely(&is_lpcr_self_save))
> + opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> + }
> }
>
> /*
> @@ -1298,6 +1343,8 @@ static int pnv_parse_cpuidle_dt(void)
> }
> for (i = 0; i < nr_idle_states; i++)
> pnv_idle_states[i].psscr_mask = temp_u64[i];
> + if (of_property_read_bool(np, "ibm,opal-self-save"))
> + static_branch_enable(&self_save_available);
> }
>
> /*
> diff --git a/arch/powerpc/platforms/powernv/opal-call.c b/arch/powerpc/platforms/powernv/opal-call.c
> index 5cd0f52d258f..11e0ceb90de0 100644
> --- a/arch/powerpc/platforms/powernv/opal-call.c
> +++ b/arch/powerpc/platforms/powernv/opal-call.c
> @@ -223,6 +223,7 @@ OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI);
> OPAL_CALL(opal_handle_hmi2, OPAL_HANDLE_HMI2);
> OPAL_CALL(opal_config_cpu_idle_state, OPAL_CONFIG_CPU_IDLE_STATE);
> OPAL_CALL(opal_slw_set_reg, OPAL_SLW_SET_REG);
> +OPAL_CALL(opal_slw_self_save_reg, OPAL_SLW_SELF_SAVE_REG);
> OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION);
> OPAL_CALL(opal_unregister_dump_region, OPAL_UNREGISTER_DUMP_REGION);
> OPAL_CALL(opal_pci_set_phb_cxl_mode, OPAL_PCI_SET_PHB_CAPI_MODE);
> --
> 2.17.1
>
More information about the Skiboot
mailing list