[Skiboot] [PATCH v6 1/3] powerpc/powernv: Introduce interface for self-restore support
Gautham R Shenoy
ego at linux.vnet.ibm.com
Tue Apr 14 17:16:24 AEST 2020
On Thu, Mar 26, 2020 at 12:40:32PM +0530, Pratik Rajesh Sampat wrote:
> Introduces an interface that helps determine support for the
> self-restore API. The commit is isomorphic to the original interface of
> declaring SPRs to self-restore.
>
> Signed-off-by: Pratik Rajesh Sampat <psampat at linux.ibm.com>
This patch looks good to me.
Reviewed-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
> ---
> arch/powerpc/platforms/powernv/idle.c | 200 +++++++++++++++++++-------
> 1 file changed, 152 insertions(+), 48 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> index 78599bca66c2..858ceb86394d 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -32,10 +32,67 @@
> #define P9_STOP_SPR_MSR 2000
> #define P9_STOP_SPR_PSSCR 855
>
> +/*
> + * Type of support for each SPR
> + * FIRMWARE_RESTORE: firmware restoration supported: calls self-restore OPAL API
> + */
> +#define UNSUPPORTED 0x0
> +#define FIRMWARE_RESTORE 0x1
> +
> static u32 supported_cpuidle_states;
> struct pnv_idle_states_t *pnv_idle_states;
> int nr_pnv_idle_states;
>
> +struct preferred_sprs {
> + u64 spr;
> + u32 supported_mode;
> +};
> +
> +/*
> + * Supported mode: Default support. Can be overwritten during system
> + * initialization
> + */
> +struct preferred_sprs preferred_sprs[] = {
> + {
> + .spr = SPRN_HSPRG0,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = SPRN_LPCR,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = SPRN_HMEER,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = SPRN_HID0,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = P9_STOP_SPR_MSR,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = P9_STOP_SPR_PSSCR,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = SPRN_HID1,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = SPRN_HID4,
> + .supported_mode = FIRMWARE_RESTORE,
> + },
> + {
> + .spr = SPRN_HID5,
> + .supported_mode = FIRMWARE_RESTORE,
> + }
> +};
> +
> +const int nr_preferred_sprs = ARRAY_SIZE(preferred_sprs);
> +
> /*
> * The default stop state that will be used by ppc_md.power_save
> * function on platforms that support stop instruction.
> @@ -61,78 +118,125 @@ static bool deepest_stop_found;
>
> static unsigned long power7_offline_type;
>
> -static int pnv_save_sprs_for_deep_states(void)
> +static int pnv_self_restore_sprs(u64 pir, int cpu, u64 spr)
> {
> - int cpu;
> + u64 reg_val;
> int rc;
>
> - /*
> - * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric across
> - * all cpus at boot. Get these reg values of current cpu and use the
> - * same across all cpus.
> - */
> - uint64_t lpcr_val = mfspr(SPRN_LPCR);
> - uint64_t hid0_val = mfspr(SPRN_HID0);
> - uint64_t hid1_val = mfspr(SPRN_HID1);
> - uint64_t hid4_val = mfspr(SPRN_HID4);
> - uint64_t hid5_val = mfspr(SPRN_HID5);
> - uint64_t hmeer_val = mfspr(SPRN_HMEER);
> - uint64_t msr_val = MSR_IDLE;
> - uint64_t psscr_val = pnv_deepest_stop_psscr_val;
> -
> - for_each_present_cpu(cpu) {
> - uint64_t pir = get_hard_smp_processor_id(cpu);
> - uint64_t hsprg0_val = (uint64_t)paca_ptrs[cpu];
> -
> - rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
> + switch (spr) {
> + case SPRN_HSPRG0:
> + reg_val = (uint64_t)paca_ptrs[cpu];
> + rc = opal_slw_set_reg(pir, SPRN_HSPRG0, reg_val);
> if (rc != 0)
> return rc;
> -
> - rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> + break;
> + case SPRN_LPCR:
> + reg_val = mfspr(SPRN_LPCR);
> + rc = opal_slw_set_reg(pir, SPRN_LPCR, reg_val);
> if (rc != 0)
> return rc;
> -
> + break;
> + case P9_STOP_SPR_MSR:
> + reg_val = MSR_IDLE;
> if (cpu_has_feature(CPU_FTR_ARCH_300)) {
> - rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, msr_val);
> + rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, reg_val);
> if (rc)
> return rc;
> -
> - rc = opal_slw_set_reg(pir,
> - P9_STOP_SPR_PSSCR, psscr_val);
> -
> + }
> + break;
> + case P9_STOP_SPR_PSSCR:
> + reg_val = pnv_deepest_stop_psscr_val;
> + if (cpu_has_feature(CPU_FTR_ARCH_300)) {
> + rc = opal_slw_set_reg(pir, P9_STOP_SPR_PSSCR, reg_val);
> if (rc)
> return rc;
> }
> -
> - /* HIDs are per core registers */
> + break;
> + case SPRN_HMEER:
> + reg_val = mfspr(SPRN_HMEER);
> if (cpu_thread_in_core(cpu) == 0) {
> -
> - rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
> - if (rc != 0)
> + rc = opal_slw_set_reg(pir, SPRN_HMEER, reg_val);
> + if (rc)
> return rc;
> -
> - rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
> - if (rc != 0)
> + }
> + break;
> + case SPRN_HID0:
> + reg_val = mfspr(SPRN_HID0);
> + if (cpu_thread_in_core(cpu) == 0) {
> + rc = opal_slw_set_reg(pir, SPRN_HID0, reg_val);
> + if (rc)
> return rc;
> + }
> + break;
> + case SPRN_HID1:
> + reg_val = mfspr(SPRN_HID1);
> + if (!cpu_has_feature(CPU_FTR_ARCH_300) &&
> + cpu_thread_in_core(cpu) == 0) {
> + rc = opal_slw_set_reg(pir, SPRN_HID1, reg_val);
> + if (rc)
> + return rc;
> + }
> + break;
> + case SPRN_HID4:
> + reg_val = mfspr(SPRN_HID4);
> + if (!cpu_has_feature(CPU_FTR_ARCH_300) &&
> + cpu_thread_in_core(cpu) == 0) {
> + rc = opal_slw_set_reg(pir, SPRN_HID4, reg_val);
> + if (rc)
> + return rc;
> + }
> + break;
> + case SPRN_HID5:
> + reg_val = mfspr(SPRN_HID5);
> + if (!cpu_has_feature(CPU_FTR_ARCH_300) &&
> + cpu_thread_in_core(cpu) == 0) {
> + rc = opal_slw_set_reg(pir, SPRN_HID5, reg_val);
> + if (rc)
> + return rc;
> + }
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
>
> - /* Only p8 needs to set extra HID regiters */
> - if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
> -
> - rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
> - if (rc != 0)
> - return rc;
> -
> - rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
> - if (rc != 0)
> - return rc;
> +static int pnv_self_save_restore_sprs(void)
> +{
> + int rc, index, cpu;
> + u64 pir;
> + struct preferred_sprs curr_spr;
>
> - rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
> + for_each_present_cpu(cpu) {
> + pir = get_hard_smp_processor_id(cpu);
> + for (index = 0; index < nr_preferred_sprs; index++) {
> + curr_spr = preferred_sprs[index];
> + /* HIDs are per core register */
> + if (cpu_thread_in_core(cpu) != 0 &&
> + (curr_spr.spr == SPRN_HMEER ||
> + curr_spr.spr == SPRN_HID0 ||
> + curr_spr.spr == SPRN_HID1 ||
> + curr_spr.spr == SPRN_HID4 ||
> + curr_spr.spr == SPRN_HID5))
> + continue;
> + if (curr_spr.supported_mode & FIRMWARE_RESTORE) {
> + rc = pnv_self_restore_sprs(pir, cpu,
> + curr_spr.spr);
> if (rc != 0)
> return rc;
> }
> }
> }
> + return 0;
> +}
>
> +static int pnv_save_sprs_for_deep_states(void)
> +{
> + int rc;
> +
> + rc = pnv_self_save_restore_sprs();
> + if (rc != 0)
> + return rc;
> return 0;
> }
>
> --
> 2.17.1
>
More information about the Skiboot
mailing list