[Skiboot] [PATCH v2 10/16] npu2-opencapi: Tweak fundamental reset sequence
Frederic Barrat
fbarrat at linux.ibm.com
Thu Oct 10 06:38:05 AEDT 2019
Modify slightly the ordering of a few steps in our init sequence on
fundamental reset, so that it can be called from the OS, when the link
is already up:
- when the card is reset, the link goes down, so we need to fence the
brick to prevent errors propagating to the NPU and OS
- since fencing and unfencing don't require any delay, let's also
fence/unfence during the very first reset at boot. It's useless but
doesn't hurt and keep the code simpler.
- resetting the PHY must be done a bit later, while fenced and the ODL
and DLx in reset
Signed-off-by: Frederic Barrat <fbarrat at linux.ibm.com>
---
hw/npu2-opencapi.c | 48 +++++++++++++++++++++++++---------------------
include/npu2.h | 2 --
2 files changed, 26 insertions(+), 24 deletions(-)
diff --git a/hw/npu2-opencapi.c b/hw/npu2-opencapi.c
index f7be9f09..619d4be8 100644
--- a/hw/npu2-opencapi.c
+++ b/hw/npu2-opencapi.c
@@ -1039,6 +1039,28 @@ static int64_t npu2_opencapi_get_presence_state(struct pci_slot __unused *slot,
return OPAL_SUCCESS;
}
+static void fence_brick(struct npu2_dev *dev)
+{
+ OCAPIDBG(dev, "Fencing brick\n");
+ set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
+ dev->brick_index, 0b11);
+ /* from 13.2.1, Quiesce Fence State */
+ npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
+ PPC_BIT(dev->brick_index + 6));
+}
+
+static void unfence_brick(struct npu2_dev *dev)
+{
+ OCAPIDBG(dev, "Unfencing brick\n");
+ npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
+ PPC_BIT(dev->brick_index));
+
+ set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
+ dev->brick_index, 0b10);
+ set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
+ dev->brick_index, 0b00);
+}
+
static enum OpalShpcLinkState get_link_width(uint64_t odl_status)
{
uint64_t tx_lanes, rx_lanes, state;
@@ -1153,7 +1175,7 @@ static int64_t npu2_opencapi_poll_link(struct pci_slot *slot)
return OPAL_HARDWARE;
}
-static int64_t npu2_opencapi_creset(struct pci_slot *slot __unused)
+static int64_t npu2_opencapi_creset(struct pci_slot *slot)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
@@ -1183,19 +1205,10 @@ static int64_t npu2_opencapi_freset(struct pci_slot *slot)
OCAPIINF(dev, "no card detected\n");
return OPAL_SUCCESS;
}
- if (dev->train_need_fence) {
- OCAPIDBG(dev, "Fencing OTL during reset\n");
- set_fence_control(chip_id, dev->npu->xscom_base,
- dev->brick_index, 0b11);
- npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
- PPC_BIT(dev->brick_index + 6));
- dev->train_fenced = true;
- }
- dev->train_need_fence = true;
slot->link_retries = OCAPI_LINK_TRAINING_RETRIES;
- npu2_opencapi_phy_reset(dev);
/* fall-through */
case OCAPI_SLOT_FRESET_INIT:
+ fence_brick(dev);
assert_odl_reset(chip_id, dev->brick_index);
assert_adapter_reset(dev);
pci_slot_set_state(slot,
@@ -1204,6 +1217,7 @@ static int64_t npu2_opencapi_freset(struct pci_slot *slot)
return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
case OCAPI_SLOT_FRESET_ASSERT_DELAY:
+ npu2_opencapi_phy_reset(dev);
deassert_odl_reset(chip_id, dev->brick_index);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_DEASSERT_DELAY);
@@ -1221,15 +1235,7 @@ static int64_t npu2_opencapi_freset(struct pci_slot *slot)
return pci_slot_set_sm_timeout(slot, msecs_to_tb(250));
case OCAPI_SLOT_FRESET_DEASSERT_DELAY2:
- if (dev->train_fenced) {
- OCAPIDBG(dev, "Unfencing OTL after reset\n");
- npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
- PPC_BIT(dev->brick_index));
- set_fence_control(chip_id, dev->npu->xscom_base,
- dev->brick_index, 0b00);
- dev->train_fenced = false;
- }
-
+ unfence_brick(dev);
set_init_pattern(chip_id, dev);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_INIT_DELAY);
@@ -1692,8 +1698,6 @@ static void setup_device(struct npu2_dev *dev)
dev->bdfn = 0;
dev->linux_pe = -1;
- dev->train_need_fence = false;
- dev->train_fenced = false;
/* TODO: Procedure 13.1.3.7 - AFU Memory Range BARs */
/* Procedure 13.1.3.8 - AFU MMIO Range BARs */
diff --git a/include/npu2.h b/include/npu2.h
index d2316dc1..6b1063da 100644
--- a/include/npu2.h
+++ b/include/npu2.h
@@ -145,8 +145,6 @@ struct npu2_dev {
/* OpenCAPI */
struct phb phb_ocapi;
uint64_t linux_pe;
- bool train_need_fence;
- bool train_fenced;
unsigned long train_start;
unsigned long train_timeout;
};
--
2.21.0
More information about the Skiboot
mailing list