[Skiboot] [PATCH v3 8/8] imc: Use pir_to_core_id() rather than cpu_get_core_index()
Vaidyanathan Srinivasan
svaidy at linux.vnet.ibm.com
Mon Mar 25 04:25:43 AEDT 2019
From: Benjamin Herrenschmidt <benh at kernel.crashing.org>
The IMC HW targets HW ECs, not fused cores on P9
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Signed-off-by: Michael Neuling <mikey at neuling.org>
---
hw/imc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/hw/imc.c b/hw/imc.c
index 354a5454..cf10701e 100644
--- a/hw/imc.c
+++ b/hw/imc.c
@@ -630,7 +630,7 @@ static int64_t opal_imc_counters_init(uint32_t type, uint64_t addr, uint64_t cpu
* pdbar in specific scom ports. port_id are in
* pdbar_scom_index[] and htm_scom_index[].
*/
- phys_core_id = cpu_get_core_index(c);
+ phys_core_id = pir_to_core_id(c->pir);
port_id = phys_core_id % 4;
if (proc_chip_quirks & QUIRK_MAMBO_CALLOUTS)
@@ -750,7 +750,7 @@ static int64_t opal_imc_counters_start(uint32_t type, uint64_t cpu_pir)
* Core IMC hardware mandates setting of htm_mode in specific
* scom ports (port_id are in htm_scom_index[])
*/
- phys_core_id = cpu_get_core_index(c);
+ phys_core_id = pir_to_core_id(c->pir);
port_id = phys_core_id % 4;
if (proc_chip_quirks & QUIRK_MAMBO_CALLOUTS)
@@ -811,7 +811,7 @@ static int64_t opal_imc_counters_stop(uint32_t type, uint64_t cpu_pir)
* Core IMC hardware mandates setting of htm_mode in specific
* scom ports (port_id are in htm_scom_index[])
*/
- phys_core_id = cpu_get_core_index(c);
+ phys_core_id = pir_to_core_id(c->pir);
port_id = phys_core_id % 4;
if (proc_chip_quirks & QUIRK_MAMBO_CALLOUTS)
--
2.20.1
More information about the Skiboot
mailing list