[Skiboot] [PATCH 7/7] npu2-opencapi: Fix adapter reset when using 2 adapters

[Frederic Barrat]

If two opencapi adapters are on the same obus, we may try to train the
two links in parallel at boot time, when all the PCI links are being
trained. Both links use the same i2c controller to handle the reset
signal, so some care is needed to make sure resetting one doesn't
interfere with the reset of the other. We need to keep track of the
current state of the i2c controller (and use locking).

This went mostly unnoticed as you need to have 2 opencapi cards on the
same socket and links tended to train anyway because of the retries.

Signed-off-by: Frederic Barrat <fbarrat at linux.ibm.com>
---
 hw/npu2-common.c   |  3 +++
 hw/npu2-opencapi.c | 34 +++++++++++++++++++++++++++-------
 include/npu2.h     |  4 ++++
 3 files changed, 34 insertions(+), 7 deletions(-)

diff --git a/hw/npu2-common.c b/hw/npu2-common.c
index ec69953f..3d0b6366 100644
--- a/hw/npu2-common.c
+++ b/hw/npu2-common.c
@@ -182,6 +182,9 @@ static struct npu2 *setup_npu(struct dt_node *dn)
 	npu->xscom_base = dt_get_address(dn, 0, NULL);
 	npu->phb_index = dt_prop_get_u32(dn, "ibm,phb-index");
 
+	init_lock(&npu->i2c_lock);
+	npu->i2c_pin_mode = ~0; // input mode by default
+	npu->i2c_pin_wr_state = ~0; // reset is active low
 	if (platform.ocapi) {
 		/* Find I2C port for handling device presence/reset */
 		snprintf(port_name, sizeof(port_name), "p8_%08x_e%dp%d",
diff --git a/hw/npu2-opencapi.c b/hw/npu2-opencapi.c
index 786fb655..ccd3cd4b 100644
--- a/hw/npu2-opencapi.c
+++ b/hw/npu2-opencapi.c
@@ -848,10 +848,9 @@ static void otl_enabletx(uint32_t gcid, uint32_t scom_base,
 	/* TODO: Abort if credits are zero */
 }
 
-static void assert_adapter_reset(struct npu2_dev *dev)
+static uint8_t get_reset_pin(struct npu2_dev *dev)
 {
-	uint8_t pin, data;
-	int rc;
+	uint8_t pin;
 
 	switch (dev->brick_index) {
 	case 2:
@@ -869,14 +868,25 @@ static void assert_adapter_reset(struct npu2_dev *dev)
 	default:
 		assert(false);
 	}
+	return pin;
+}
+
+static void assert_adapter_reset(struct npu2_dev *dev)
+{
+	uint8_t pin, data;
+	int rc;
 
+	pin = get_reset_pin(dev);
 	/*
 	 * set the i2c reset pin in output mode
 	 *
 	 * On the 9554 device, register 3 is the configuration
 	 * register and a pin is in output mode if its value is 0
 	 */
-	data = ~pin;
+	lock(&dev->npu->i2c_lock);
+	dev->npu->i2c_pin_mode &= ~pin;
+	data = dev->npu->i2c_pin_mode;
+
 	rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
 			platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
 			0x3, 1,
@@ -885,16 +895,20 @@ static void assert_adapter_reset(struct npu2_dev *dev)
 		goto err;
 
 	/* register 1 controls the signal, reset is active low */
-	data = ~pin;
+	dev->npu->i2c_pin_wr_state &= ~pin;
+	data = dev->npu->i2c_pin_wr_state;
+
 	rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
 			platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
 			0x1, 1,
 			&data, sizeof(data), 120);
 	if (rc)
 		goto err;
+	unlock(&dev->npu->i2c_lock);
 	return;
 
 err:
+	unlock(&dev->npu->i2c_lock);
 	/**
 	 * @fwts-label OCAPIDeviceResetFailed
 	 * @fwts-advice There was an error attempting to send
@@ -905,14 +919,20 @@ err:
 
 static void deassert_adapter_reset(struct npu2_dev *dev)
 {
-	uint8_t data;
+	uint8_t pin, data;
 	int rc;
 
-	data = 0xFF;
+	pin = get_reset_pin(dev);
+
+	lock(&dev->npu->i2c_lock);
+	dev->npu->i2c_pin_wr_state |= pin;
+	data = dev->npu->i2c_pin_wr_state;
+
 	rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
 			platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
 			0x1, 1,
 			&data, sizeof(data), 120);
+	unlock(&dev->npu->i2c_lock);
 	if (rc) {
 		/**
 		 * @fwts-label OCAPIDeviceResetFailed
diff --git a/include/npu2.h b/include/npu2.h
index cfa3b1f8..b62d1748 100644
--- a/include/npu2.h
+++ b/include/npu2.h
@@ -173,7 +173,11 @@ struct npu2 {
 	struct phb	phb_nvlink;
 	uint32_t	phb_index;
 
+	/* OCAPI */
 	uint64_t	i2c_port_id_ocapi;
+	struct lock	i2c_lock;
+	uint8_t		i2c_pin_mode;
+	uint8_t		i2c_pin_wr_state;
 };
 
 static inline struct npu2 *phb_to_npu2_nvlink(struct phb *phb)
-- 
2.19.1