[Skiboot] [PATCH] platform: add Raptor Blackbird support

[Stewart Smith]

Based off the Raptor patch:
https://git.raptorcs.com/git/blackbird-skiboot/commit/?id=c81f9d66592dc2a7cf7f6c59c3def5cee0638c1f

Notable changes are slot names matching what's silkscreened on the board.
See https://i1.wp.com/www.flamingspork.com/blog/wp-content/uploads/2019/12/IMG_4006-scaled.jpg
for a photo of the actual board.

I haven't included the port 80h bit as I haven't worked out how to probe that from the BMC to test.

Boot tested, seems good.

Signed-off-by: Stewart Smith <stewart at flamingspork.com>
---
 platforms/astbmc/Makefile.inc |  3 +-
 platforms/astbmc/blackbird.c  | 66 +++++++++++++++++++++++++++++++++++
 2 files changed, 68 insertions(+), 1 deletion(-)
 create mode 100644 platforms/astbmc/blackbird.c

diff --git a/platforms/astbmc/Makefile.inc b/platforms/astbmc/Makefile.inc
index fd4eaeac..e0f8760d 100644
--- a/platforms/astbmc/Makefile.inc
+++ b/platforms/astbmc/Makefile.inc
@@ -6,7 +6,8 @@ ASTBMC_OBJS = pnor.o common.o slots.o \
 	      garrison.o barreleye.o \
 	      witherspoon.o zaius.o romulus.o p9dsu.o \
 	      vesnin.o nicole.o mihawk.o\
-	      talos.o swift.o
+	      talos.o blackbird.o \
+	      swift.o
 
 ASTBMC = $(PLATDIR)/astbmc/built-in.a
 $(ASTBMC): $(ASTBMC_OBJS:%=$(PLATDIR)/astbmc/%)
diff --git a/platforms/astbmc/blackbird.c b/platforms/astbmc/blackbird.c
new file mode 100644
index 00000000..8817b8c5
--- /dev/null
+++ b/platforms/astbmc/blackbird.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: Apache-2.0
+/* Copyright 2017 IBM Corp.
+ * Copyright 2018-2019 Raptor Engineering, LLC
+ * Copyright 2019 Stewart Smith
+ */
+
+#include <skiboot.h>
+#include <device.h>
+#include <console.h>
+#include <chip.h>
+#include <ipmi.h>
+#include <psi.h>
+
+#include "astbmc.h"
+
+ST_PLUGGABLE(blackbird_cpu1_slot1, "SLOT1 PCIE 4.0 X16");
+ST_PLUGGABLE(blackbird_cpu1_slot2, "SLOT2 PCIE 4.0 X8");
+
+ST_BUILTIN_DEV(blackbird_builtin_sata, "Builtin SATA");
+ST_BUILTIN_DEV(blackbird_builtin_usb, "Builtin USB");
+ST_BUILTIN_DEV(blackbird_builtin_ethernet, "Builtin Ethernet");
+ST_BUILTIN_DEV(blackbird_builtin_bmc, "BMC");
+
+static const struct slot_table_entry blackbird_phb_table[] = {
+	ST_PHB_ENTRY(0, 0, blackbird_cpu1_slot1),
+	ST_PHB_ENTRY(0, 1, blackbird_cpu1_slot2),
+
+	ST_PHB_ENTRY(0, 2, blackbird_builtin_sata),
+	ST_PHB_ENTRY(0, 3, blackbird_builtin_usb),
+	ST_PHB_ENTRY(0, 4, blackbird_builtin_ethernet),
+	ST_PHB_ENTRY(0, 5, blackbird_builtin_bmc),
+
+	{ .etype = st_end },
+};
+
+static bool blackbird_probe(void)
+{
+	if (!dt_node_is_compatible(dt_root, "rcs,blackbird"))
+		return false;
+
+	/* Lot of common early inits here */
+	astbmc_early_init();
+
+	/* Setup UART for use by OPAL (Linux hvc) */
+	uart_set_console_policy(UART_CONSOLE_OPAL);
+
+	slot_table_init(blackbird_phb_table);
+
+	return true;
+}
+
+DECLARE_PLATFORM(blackbird) = {
+	.name			= "Blackbird",
+	.probe			= blackbird_probe,
+	.init			= astbmc_init,
+	.start_preload_resource	= flash_start_preload_resource,
+	.resource_loaded	= flash_resource_loaded,
+	.bmc			= &bmc_plat_ast2500_openbmc,
+	.pci_get_slot_info	= slot_table_get_slot_info,
+	.pci_probe_complete	= check_all_slot_table,
+	.cec_power_down         = astbmc_ipmi_power_down,
+	.cec_reboot             = astbmc_ipmi_reboot,
+	.elog_commit		= ipmi_elog_commit,
+	.exit			= astbmc_exit,
+	.terminate		= ipmi_terminate,
+};
-- 
2.23.0