[Skiboot] [PATCH] platforms/astbmc/vesnin: Send list of PCI devices to BMC through IPMI
Artem Senichev
a.senichev at yadro.com
Fri Oct 19 22:37:51 AEDT 2018
Implements sending a list of installed PCI devices through IPMI protocol.
Each PCI device description is sent as a standalone IPMI message.
A list of devices can be gathered from separate messages using the
session identifier. The session Id is an incremental counter that is
updated at the start of synchronization session.
Signed-off-by: Artem Senichev <a.senichev at yadro.com>
---
platforms/astbmc/vesnin.c | 103 +++++++++++++++++++++++++++++++++++++-
1 file changed, 101 insertions(+), 2 deletions(-)
diff --git a/platforms/astbmc/vesnin.c b/platforms/astbmc/vesnin.c
index 62eb3403..fb3425f8 100644
--- a/platforms/astbmc/vesnin.c
+++ b/platforms/astbmc/vesnin.c
@@ -1,5 +1,5 @@
/**
- * Copyright (c) 2018 YADRO (KNS Group LLC)
+ * Copyright (c) 2018 YADRO
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
@@ -19,6 +19,8 @@
#include <console.h>
#include <chip.h>
#include <ipmi.h>
+#include <pci.h>
+#include <pci-cfg.h>
#include "astbmc.h"
@@ -27,6 +29,51 @@
#define CHIP_ID_CPU2 0x10
#define CHIP_ID_CPU3 0x18
+/* Current version of the PCI inventory synchronization packet. */
+#define PCI_INV_VERSION 1
+
+/* IPMI message identifier (IBM OEM) for PCI inventory. */
+#define IPMI_PCI_INV IPMI_CODE(0x3a, 0x2a)
+
+/* Id of the current PCI inventory synchronization session. */
+static uint8_t pci_inv_session_id;
+
+/**
+ * struct pciinv_device - PCI device inventory description.
+ * @domain_num: Domain number.
+ * @bus_num: Bus number.
+ * @device_num: Device number.
+ * @func_num: Function number.
+ * @vendor_id: Vendor Id.
+ * @device_id: Device Id.
+ * @class_code: Device class code.
+ * @revision: Revision number.
+ *
+ * All fields have Big Endian byte order.
+ */
+struct pciinv_device {
+ uint16_t domain_num;
+ uint8_t bus_num;
+ uint8_t device_num;
+ uint8_t func_num;
+ uint16_t vendor_id;
+ uint16_t device_id;
+ uint32_t class_code;
+ uint8_t revision;
+} __packed;
+
+/**
+ * struct pciinv_packet - IPMI message packet data.
+ * @version: Packet version, must be set to %PCI_INVENTORY_VERSION.
+ * @session: Sync session Id.
+ * @device: PCI device description.
+ */
+struct pciinv_packet {
+ uint8_t version;
+ uint8_t session;
+ struct pciinv_device device;
+} __packed;
+
static const struct slot_table_entry vesnin_phb0_0_slot[] = {
{
@@ -233,6 +280,58 @@ static const struct slot_table_entry vesnin_phb_table[] = {
{ .etype = st_end }
};
+/**
+ * pciinv_walk() - Callback from PCI enumerator, see :c:func:`pci_walk_dev`.
+ */
+static int pciinv_walk(struct phb *phb, struct pci_device *pd, void *data __unused)
+{
+ struct ipmi_msg *msg;
+ struct pciinv_packet pack = {
+ .version = PCI_INV_VERSION,
+ .session = pci_inv_session_id
+ };
+
+ /* PCI device filter: Skip non-EP devices */
+ if (pci_has_cap(pd, PCI_CFG_CAP_ID_EXP, false)) {
+ if (pd->dev_type != PCIE_TYPE_ENDPOINT)
+ return OPAL_SUCCESS;
+ }
+ else if (pd->is_bridge)
+ return OPAL_SUCCESS;
+
+ /* Fill the PCI device inventory description */
+ pack.device.domain_num = cpu_to_be16(phb->opal_id & 0xffff);
+ pack.device.bus_num = (pd->bdfn >> 8) & 0xff;
+ pack.device.device_num = (pd->bdfn >> 3) & 0x1f;
+ pack.device.func_num = pd->bdfn & 0x7;
+ pack.device.vendor_id = cpu_to_be16(PCI_VENDOR_ID(pd->vdid));
+ pack.device.device_id = cpu_to_be16(PCI_DEVICE_ID(pd->vdid));
+ pack.device.class_code = cpu_to_be32(pd->class & 0xffffff);
+ pci_cfg_read8(phb, pd->bdfn, PCI_CFG_REV_ID, &pack.device.revision);
+
+ msg = ipmi_mkmsg_simple(IPMI_PCI_INV, &pack, sizeof(pack));
+ if (!msg)
+ return OPAL_HARDWARE;
+
+ /* Synchronously send the IPMI message, the queue is too small */
+ ipmi_queue_msg_sync(msg);
+
+ return OPAL_SUCCESS;
+}
+
+static void vesnin_pci_probe_complete(void)
+{
+ struct phb *phb;
+
+ check_all_slot_table();
+
+ /* Send PCI device list to the BMC */
+ ++pci_inv_session_id;
+ for_each_phb(phb) {
+ pci_walk_dev(phb, NULL, &pciinv_walk, NULL);
+ }
+}
+
static bool vesnin_probe(void)
{
if (!dt_node_is_compatible(dt_root, "YADRO,vesnin"))
@@ -251,7 +350,7 @@ DECLARE_PLATFORM(vesnin) = {
.probe = vesnin_probe,
.init = astbmc_init,
.pci_get_slot_info = slot_table_get_slot_info,
- .pci_probe_complete = check_all_slot_table,
+ .pci_probe_complete = vesnin_pci_probe_complete,
.external_irq = astbmc_ext_irq_serirq_cpld,
.cec_power_down = astbmc_ipmi_power_down,
.cec_reboot = astbmc_ipmi_reboot,
--
2.17.1
More information about the Skiboot
mailing list