[Skiboot] [PATCH 4/4] hw/npu2-common: Allow mixed mode NPU setups

[Andrew Donnellan]

Now that we have all the support in place for NPUs with both NVLink and
OpenCAPI devices, get rid of the error that aborts NPU init when a mixed
setup is detected.

While we're there, rename setup_devices() to more accurately reflect what
it does, and move the calls to the NVLink/OpenCAPI setup code out of there
into the main probe function.

Signed-off-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
---
 hw/npu2-common.c   | 23 ++++-------------------
 hw/npu2-opencapi.c |  5 -----
 2 files changed, 4 insertions(+), 24 deletions(-)

diff --git a/hw/npu2-common.c b/hw/npu2-common.c
index 1b07d157b744..16533286ca79 100644
--- a/hw/npu2-common.c
+++ b/hw/npu2-common.c
@@ -361,26 +361,19 @@ failed:
 	return NULL;
 }
 
-static void setup_devices(struct npu2 *npu)
+static void add_link_type_properties(struct npu2 *npu)
 {
-	bool nvlink_detected = false, ocapi_detected = false;
 	struct npu2_dev *dev;
 
-	/*
-	 * TODO: In future, we'll do brick configuration here to support mixed
-	 * setups.
-	 */
 	for (int i = 0; i < npu->total_devices; i++) {
 		dev = &npu->devices[i];
 		switch (dev->type) {
 		case NPU2_DEV_TYPE_NVLINK:
-			nvlink_detected = true;
 			dt_add_property_strings(dev->dt_node,
 						"ibm,npu-link-type",
 						"nvlink");
 			break;
 		case NPU2_DEV_TYPE_OPENCAPI:
-			ocapi_detected = true;
 			dt_add_property_strings(dev->dt_node,
 						"ibm,npu-link-type",
 						"opencapi");
@@ -393,16 +386,6 @@ static void setup_devices(struct npu2 *npu)
 						"unknown");
 		}
 	}
-
-	if (nvlink_detected && ocapi_detected) {
-		prlog(PR_ERR, "NPU: NVLink and OpenCAPI devices on same chip not supported, aborting NPU init\n");
-		return;
-	}
-
-	if (nvlink_detected)
-		npu2_nvlink_init_npu(npu);
-	else if (ocapi_detected)
-		npu2_opencapi_init_npu(npu);
 }
 
 void probe_npu2(void)
@@ -438,7 +421,9 @@ void probe_npu2(void)
 		if (!npu)
 			continue;
 		platform.npu2_device_detect(npu);
+		add_link_type_properties(npu);
 		set_brick_config(npu);
-		setup_devices(npu);
+		npu2_nvlink_init_npu(npu);
+		npu2_opencapi_init_npu(npu);
 	}
 }
diff --git a/hw/npu2-opencapi.c b/hw/npu2-opencapi.c
index fdad7c5c1bbe..93df898cd068 100644
--- a/hw/npu2-opencapi.c
+++ b/hw/npu2-opencapi.c
@@ -19,15 +19,10 @@
  *
  * This file provides support for OpenCAPI as implemented on POWER9.
  *
- * At present, we initialise the NPU separately from the NVLink code in npu2.c.
- * As such, we don't currently support mixed NVLink and OpenCAPI configurations
- * on the same NPU for machines such as Witherspoon.
- *
  * Procedure references in this file are to the POWER9 OpenCAPI NPU Workbook
  * (IBM internal document).
  *
  * TODO:
- *   - Support for mixed NVLink and OpenCAPI on the same NPU
  *   - Support for link ganging (one AFU using multiple links)
  *   - Link reset and error handling
  *   - Presence detection
-- 
2.11.0