[Skiboot] [PATCH v6 11/22] hdata: Create dump DT node under /ibm, opal DT node

[Vasant Hegde]

We use MPIPL system parameter to detect whether MPIPL is supported or not.
If its supported create new device tree node (/ibm,opal/dump) to pass all
dump related information to kernel. This patch creates new node and populates
below properties:
  - compatible   - dump version (ibm,opal-dump)
  - fw-load-area - Memory used by OPAL to load kernel/initrd from PNOR
                   (KERNEL_LOAD_BASE & INITRAMFS_LOAD_BASE)
                   This is the temporary memory used by OPAL during boot.
		   Later Linux kernel is free to use this memory. We will
		   pass this information to Linux. If Linux kernel is using
		   these memory, it will make sure to create destination
		   memory to preserve content during MPIPL.

Signed-off-by: Vasant Hegde <hegdevasant at linux.vnet.ibm.com>
---
 hdata/spira.c | 24 ++++++++++++++++++++++++
 hdata/spira.h |  1 +
 2 files changed, 25 insertions(+)

diff --git a/hdata/spira.c b/hdata/spira.c
index b0e91803f..d1748511c 100644
--- a/hdata/spira.c
+++ b/hdata/spira.c
@@ -1033,6 +1033,26 @@ static void dt_init_secureboot_node(const struct iplparams_sysparams *sysparams)
 	dt_add_property_cells(node, "hw-key-hash-size", hw_key_hash_size);
 }
 
+static void fadump_add_node(void)
+{
+	u64 fw_load_area[4];
+	struct dt_node *node;
+
+	if (proc_gen < proc_gen_p9)
+		return;
+
+	opal_node = dt_new_check(dt_root, "ibm,opal");
+	node = dt_new(opal_node, "dump");
+	assert(node);
+	dt_add_property_string(node, "compatible", "ibm,opal-dump");
+
+	fw_load_area[0] = (u64)KERNEL_LOAD_BASE;
+	fw_load_area[1] = KERNEL_LOAD_SIZE;
+	fw_load_area[2] = (u64)INITRAMFS_LOAD_BASE;
+	fw_load_area[3] = INITRAMFS_LOAD_SIZE;
+	dt_add_property(node, "fw-load-area", fw_load_area, sizeof(fw_load_area));
+}
+
 static void add_iplparams_sys_params(const void *iplp, struct dt_node *node)
 {
 	const struct iplparams_sysparams *p;
@@ -1120,6 +1140,10 @@ static void add_iplparams_sys_params(const void *iplp, struct dt_node *node)
 	if (sys_attributes & SYS_ATTR_RISK_LEVEL)
 		dt_add_property(node, "elevated-risk-level", NULL, 0);
 
+	/* Populate fadump node */
+	if (sys_attributes & SYS_ATTR_MPIPL_SUPPORTED)
+		fadump_add_node();
+
 	if (version >= 0x60 && proc_gen >= proc_gen_p9)
 		dt_init_secureboot_node(p);
 }
diff --git a/hdata/spira.h b/hdata/spira.h
index 8aa688b62..5c030692e 100644
--- a/hdata/spira.h
+++ b/hdata/spira.h
@@ -364,6 +364,7 @@ struct iplparams_sysparams {
 	__be32		sys_eco_mode;
 #define SYS_ATTR_MULTIPLE_TPM PPC_BIT32(0)
 #define SYS_ATTR_RISK_LEVEL PPC_BIT32(3)
+#define SYS_ATTR_MPIPL_SUPPORTED PPC_BIT32(4)
 	__be32		sys_attributes;
 	__be32		mem_scrubbing;
 	__be16		cur_spl_value;
-- 
2.14.3