[Skiboot] [PATCH] Add the other 7 ATSD registers to the device tree.

Rashmica Gupta rashmica.g at gmail.com
Fri Nov 16 14:02:48 AEDT 2018


On Fri, 2018-11-16 at 13:35 +1100, Oliver wrote:
> On Fri, Nov 16, 2018 at 12:04 PM Rashmica Gupta <rashmica.g at gmail.com
> > wrote:
> > 
> > Suggested-by: Alexey Kardashevskiy <aik at ozlabs.ru>
> > Signed-off-by: Rashmica Gupta <rashmica.g at gmail.com>
> > ---
> >  hw/npu2.c           | 15 ++++++++++-----
> >  include/npu2-regs.h |  2 ++
> >  2 files changed, 12 insertions(+), 5 deletions(-)
> > 
> > diff --git a/hw/npu2.c b/hw/npu2.c
> > index d7d94357..28745682 100644
> > --- a/hw/npu2.c
> > +++ b/hw/npu2.c
> > @@ -1781,7 +1781,7 @@ static void npu2_add_phb_properties(struct
> > npu2 *p)
> >  {
> >         struct dt_node *np = p->phb_nvlink.dt_node;
> >         uint32_t icsp = get_ics_phandle();
> > -       uint64_t mm_base, mm_size, mmio_atsd;
> > +       uint64_t mm_base, mm_size;
> > 
> >         /*
> >          * Add various properties that HB doesn't have to
> > @@ -1803,10 +1803,15 @@ static void npu2_add_phb_properties(struct
> > npu2 *p)
> >         dt_add_property_cells(np, "ibm,opal-reserved-pe",
> >                               NPU2_RESERVED_PE_NUM);
> > 
> > -       mmio_atsd = (u64) p->regs +
> > -               NPU2_REG_OFFSET(NPU2_STACK_ATSD, NPU2_BLOCK_ATSD0,
> > NPU2_XTS_MMIO_ATSD_LAUNCH);
> > -       dt_add_property_cells(np, "ibm,mmio-atsd", hi32(mmio_atsd),
> > -                             lo32(mmio_atsd));
> > +       dt_add_property_cells(np, "ibm,mmio-atsd",
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 0)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 0)),
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 1)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 1)),
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 2)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 2)),
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 3)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 3)),
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 4)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 4)),
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 5)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 5)),
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 6)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 6)),
> > +                       hi32(MMIO_ATSD_ADDR(p->regs, 7)),
> > lo32(MMIO_ATSD_ADDR(p->regs, 7)));
> 
> Any reason you can't use dt_add_property_u64s() here?
> 

Nope, I just didn't know about it



> > 
> >         /*
> >          * Memory window is exposed as 64-bits non-prefetchable
> > diff --git a/include/npu2-regs.h b/include/npu2-regs.h
> > index 8c1ba5ff..165e0b79 100644
> > --- a/include/npu2-regs.h
> > +++ b/include/npu2-regs.h
> > @@ -579,6 +579,8 @@ void npu2_scom_write(uint64_t gcid, uint64_t
> > scom_base,
> >  #define NPU2_XTS_MMIO_ATSD_LAUNCH              0x000
> >  #define NPU2_XTS_MMIO_ATSD_AVA                 0x008
> >  #define NPU2_XTS_MMIO_ATSD_STATUS              0x010
> > +#define MMIO_ATSD_ADDR(p, n)                   (u64) p +
> > NPU2_REG_OFFSET(NPU2_STACK_ATSD,\
> > +                                               NPU2_BLOCK_ATSD##n,
> > NPU2_XTS_MMIO_ATSD_LAUNCH)
> > 
> >  /* ALTD SCOM addresses */
> >  #define NPU2_MISC_SCOM_IND_SCOM_ADDR           0x68e
> > --
> > 2.17.2
> > 
> > _______________________________________________
> > Skiboot mailing list
> > Skiboot at lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/skiboot



More information about the Skiboot mailing list