[Skiboot] Flashing Image using 'pflash' Tool
AKASH G J
akashgj91 at gmail.com
Wed Nov 14 17:40:16 AEDT 2018
It worked. Thanks for the help.
On Tue, Nov 13, 2018 at 5:45 PM Oliver <oohall at gmail.com> wrote:
> On Tue, Nov 13, 2018 at 10:51 PM AKASH G J <akashgj91 at gmail.com> wrote:
> > Hi Team,
> > I tried to flash kernel image fitImage.bin to the flash memory address
> 0x20100000 using the following command.
> > pflash -b -e -a 0x20100000 -f -p fitImage.bin
> -a specifies the offset into the PNOR that you want to read or write
> from, not a memory address.
> > It is showing the following error.
> > WARNING: Erase at 0x20100000 for 0x00271e20 isn't erase block aligned
> > About to erase 0x20100000..0x20371e20 !
> > Erasing...
> > [ ] 0%mtd_erase: IOCTL
> to kernt
> > Failed to blocklevel_smart_erase(): 3
> > Thanks and Regards,
> > Akash
> > _______________________________________________
> > Skiboot mailing list
> > Skiboot at lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/skiboot
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Skiboot