[Skiboot] [PATCH v8 01/10] npu2: Split out common helper functions into separate file

Andrew Donnellan andrew.donnellan at au1.ibm.com
Thu Mar 1 18:54:01 AEDT 2018


Split out common helper functions for NPU register access into a separate
file, as these will be used extensively by both NVLink and OpenCAPI code.

Signed-off-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
Acked-by: Reza Arbab <arbab at linux.vnet.ibm.com>

---

v1->v2:

  - Add copyright header (Fred)

v7->v8:

  - Rebase on master
---
 hw/Makefile.inc     |   2 +-
 hw/npu2-common.c    | 114 +++++++++++++++++++++++++++++++++++++++++++++-
 hw/npu2.c           |  92 +------------------------------------
 include/npu2-regs.h |   5 ++-
 include/npu2.h      |   2 +-
 5 files changed, 122 insertions(+), 93 deletions(-)
 create mode 100644 hw/npu2-common.c

diff --git a/hw/Makefile.inc b/hw/Makefile.inc
index 2dc3cc07916e..f31ba5841ea1 100644
--- a/hw/Makefile.inc
+++ b/hw/Makefile.inc
@@ -7,7 +7,7 @@ HW_OBJS += p7ioc.o p7ioc-inits.o p7ioc-phb.o
 HW_OBJS += phb3.o sfc-ctrl.o fake-rtc.o bt.o p8-i2c.o prd.o
 HW_OBJS += dts.o lpc-rtc.o npu.o npu-hw-procedures.o xive.o phb4.o
 HW_OBJS += fake-nvram.o lpc-mbox.o npu2.o npu2-hw-procedures.o
-HW_OBJS += phys-map.o sbe-p9.o capp.o occ-sensor.o vas.o
+HW_OBJS += npu2-common.o phys-map.o sbe-p9.o capp.o occ-sensor.o vas.o
 HW=hw/built-in.a
 
 # FIXME hack this for now
diff --git a/hw/npu2-common.c b/hw/npu2-common.c
new file mode 100644
index 000000000000..0c22d6188819
--- /dev/null
+++ b/hw/npu2-common.c
@@ -0,0 +1,114 @@
+/* Copyright 2013-2018 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <skiboot.h>
+#include <xscom.h>
+#include <pci.h>
+#include <npu2.h>
+#include <npu2-regs.h>
+#include <bitutils.h>
+
+bool is_p9dd1(void)
+{
+	struct proc_chip *chip = next_chip(NULL);
+
+	return chip &&
+	       (chip->type == PROC_CHIP_P9_NIMBUS ||
+		chip->type == PROC_CHIP_P9_CUMULUS) &&
+	       (chip->ec_level & 0xf0) == 0x10;
+}
+
+/*
+ * We use the indirect method because it uses the same addresses as
+ * the MMIO offsets (NPU RING)
+ */
+static void npu2_scom_set_addr(uint64_t gcid, uint64_t scom_base,
+			       uint64_t addr, uint64_t size)
+{
+	uint64_t isa = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_ADDR :
+				    NPU2_MISC_SCOM_IND_SCOM_ADDR;
+
+	addr = SETFIELD(NPU2_MISC_DA_ADDR, 0ull, addr);
+	addr = SETFIELD(NPU2_MISC_DA_LEN, addr, size);
+	xscom_write(gcid, scom_base + isa, addr);
+}
+
+void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
+		     uint64_t reg, uint64_t size,
+		     uint64_t val)
+{
+	uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
+				    NPU2_MISC_SCOM_IND_SCOM_DATA;
+
+	npu2_scom_set_addr(gcid, scom_base, reg, size);
+	xscom_write(gcid, scom_base + isd, val);
+}
+
+uint64_t npu2_scom_read(uint64_t gcid, uint64_t scom_base,
+			uint64_t reg, uint64_t size)
+{
+	uint64_t val;
+	uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
+				    NPU2_MISC_SCOM_IND_SCOM_DATA;
+
+	npu2_scom_set_addr(gcid, scom_base, reg, size);
+	xscom_read(gcid, scom_base + isd, &val);
+
+	return val;
+}
+
+void npu2_write_4b(struct npu2 *p, uint64_t reg, uint32_t val)
+{
+	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
+			(uint64_t)val << 32);
+}
+
+uint32_t npu2_read_4b(struct npu2 *p, uint64_t reg)
+{
+	return npu2_scom_read(p->chip_id, p->xscom_base, reg,
+			      NPU2_MISC_DA_LEN_4B) >> 32;
+}
+
+void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val)
+{
+	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, val);
+}
+
+uint64_t npu2_read(struct npu2 *p, uint64_t reg)
+{
+	return npu2_scom_read(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B);
+}
+
+void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask)
+{
+	uint64_t new_val;
+
+	new_val = npu2_read(p, reg);
+	new_val &= ~mask;
+	new_val |= val & mask;
+	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, new_val);
+}
+
+void npu2_write_mask_4b(struct npu2 *p, uint64_t reg, uint32_t val, uint32_t mask)
+{
+	uint32_t new_val;
+
+	new_val = npu2_read_4b(p, reg);
+	new_val &= ~mask;
+	new_val |= val & mask;
+	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
+			(uint64_t)new_val << 32);
+}
diff --git a/hw/npu2.c b/hw/npu2.c
index fad53c41f614..fd27c77b75f0 100644
--- a/hw/npu2.c
+++ b/hw/npu2.c
@@ -64,98 +64,6 @@
  * configure one particular BAR.
  */
 
-static bool is_p9dd1(void)
-{
-	struct proc_chip *chip = next_chip(NULL);
-
-	return chip &&
-	       (chip->type == PROC_CHIP_P9_NIMBUS ||
-		chip->type == PROC_CHIP_P9_CUMULUS) &&
-	       (chip->ec_level & 0xf0) == 0x10;
-}
-
-/*
- * We use the indirect method because it uses the same addresses as
- * the MMIO offsets (NPU RING)
- */
-static void npu2_scom_set_addr(uint64_t gcid, uint64_t scom_base,
-			       uint64_t addr, uint64_t size)
-{
-	uint64_t isa = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_ADDR :
-				    NPU2_MISC_SCOM_IND_SCOM_ADDR;
-
-	addr = SETFIELD(NPU2_MISC_DA_ADDR, 0ull, addr);
-	addr = SETFIELD(NPU2_MISC_DA_LEN, addr, size);
-	xscom_write(gcid, scom_base + isa, addr);
-}
-
-static void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
-			    uint64_t reg, uint64_t size,
-			    uint64_t val)
-{
-	uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
-				    NPU2_MISC_SCOM_IND_SCOM_DATA;
-
-	npu2_scom_set_addr(gcid, scom_base, reg, size);
-	xscom_write(gcid, scom_base + isd, val);
-}
-
-static uint64_t npu2_scom_read(uint64_t gcid, uint64_t scom_base,
-			       uint64_t reg, uint64_t size)
-{
-	uint64_t val;
-	uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
-				    NPU2_MISC_SCOM_IND_SCOM_DATA;
-
-	npu2_scom_set_addr(gcid, scom_base, reg, size);
-	xscom_read(gcid, scom_base + isd, &val);
-
-	return val;
-}
-
-void npu2_write_4b(struct npu2 *p, uint64_t reg, uint32_t val)
-{
-	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
-			(uint64_t)val << 32);
-}
-
-uint32_t npu2_read_4b(struct npu2 *p, uint64_t reg)
-{
-	return npu2_scom_read(p->chip_id, p->xscom_base, reg,
-			      NPU2_MISC_DA_LEN_4B) >> 32;
-}
-
-void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val)
-{
-	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, val);
-}
-
-uint64_t npu2_read(struct npu2 *p, uint64_t reg)
-{
-	return npu2_scom_read(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B);
-}
-
-void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask)
-{
-	uint64_t new_val;
-
-	new_val = npu2_read(p, reg);
-	new_val &= ~mask;
-	new_val |= val & mask;
-	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, new_val);
-}
-
-void npu2_write_mask_4b(struct npu2 *p, uint64_t reg, uint32_t val, uint32_t mask)
-{
-	uint32_t new_val;
-
-	new_val = npu2_read_4b(p, reg);
-	new_val &= ~mask;
-	new_val |= val & mask;
-	npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
-			(uint64_t)new_val << 32);
-}
-
 /* Set a specific flag in the vendor config space */
 void npu2_set_link_flag(struct npu2_dev *ndev, uint8_t flag)
 {
diff --git a/include/npu2-regs.h b/include/npu2-regs.h
index 73925f9ee86d..669ab984e87d 100644
--- a/include/npu2-regs.h
+++ b/include/npu2-regs.h
@@ -23,6 +23,11 @@ void npu2_write4(struct npu2 *p, uint64_t reg, uint64_t val);
 uint64_t npu2_read(struct npu2 *p, uint64_t reg);
 void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val);
 void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask);
+uint64_t npu2_scom_read(uint64_t gcid, uint64_t scom_base,
+			uint64_t reg, uint64_t size);
+void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
+		     uint64_t reg, uint64_t size,
+		     uint64_t val);
 
 /* SCOM Registers to dump on HMI to aid in debugging */
 #define NPU2_DEBUG_REG_START 0x5011000
diff --git a/include/npu2.h b/include/npu2.h
index c1f3961645ec..a1d57e4c1276 100644
--- a/include/npu2.h
+++ b/include/npu2.h
@@ -164,4 +164,6 @@ void npu2_set_link_flag(struct npu2_dev *ndev, uint8_t flag);
 void npu2_clear_link_flag(struct npu2_dev *ndev, uint8_t flag);
 uint32_t reset_ntl(struct npu2_dev *ndev);
 extern int nv_zcal_nominal;
+bool is_p9dd1(void);
+
 #endif /* __NPU2_H */
-- 
git-series 0.9.1



More information about the Skiboot mailing list