[Skiboot] [PATCH v2 1/2] Move pb_cen_hp_mode_curr register definition to xscom-p9-reg.h

[Alistair Popple]

Currently it is defined in npu2-regs.h but needs to be used by other files
as well so move it somewhere generic.

Signed-off-by: Alistair Popple <alistair at popple.id.au>
---
 hw/npu2.c               | 1 +
 include/npu2-regs.h     | 2 --
 include/xscom-p9-regs.h | 4 ++++
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/hw/npu2.c b/hw/npu2.c
index 8e2f6fe9..b8f0c21e 100644
--- a/hw/npu2.c
+++ b/hw/npu2.c
@@ -37,6 +37,7 @@
 #include <phys-map.h>
 #include <nvram.h>
 #include <xive.h>
+#include <xscom-p9-regs.h>
 
 #define NPU2_IRQ_BASE_SHIFT 13
 #define NPU2_N_DL_IRQS 23
diff --git a/include/npu2-regs.h b/include/npu2-regs.h
index a8f571eb..3e4eff3f 100644
--- a/include/npu2-regs.h
+++ b/include/npu2-regs.h
@@ -36,8 +36,6 @@ void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
 #define	MCD_BANK_CN_VALID	PPC_BIT(0)
 #define	MCD_BANK_CN_SIZE	PPC_BITMASK(13,29)
 #define	MCD_BANK_CN_ADDR	PPC_BITMASK(33,63)
-#define PB_CENT_HP_MODE_CURR	0x5011c0c
-#define  PB_CFG_CHG_RATE_GP_MASTER PPC_BIT(2)
 #define PB_CENT_MODE		0x5011c0a
 #define  PB_CFG_CHIP_ADDR_EXTENSION_MASK_CENT PPC_BITMASK(42,48)
 
diff --git a/include/xscom-p9-regs.h b/include/xscom-p9-regs.h
index c3322499..42dd4267 100644
--- a/include/xscom-p9-regs.h
+++ b/include/xscom-p9-regs.h
@@ -29,4 +29,8 @@
 
 #define P9_SCOM_SPRD				0x20010A81
 
+#define PB_CENT_HP_MODE_CURR			0x5011c0c
+#define  PB_CFG_CHG_RATE_GP_MASTER		PPC_BIT(2)
+#define  PB_CFG_PUMP_MODE			PPC_BIT(54)
+
 #endif /* __XSCOM_P9_REGS_H__ */
-- 
2.11.0