[Skiboot] [PATCH v3 09/10] platforms: Add OpenCAPI platform data and device tree nodes
Frederic Barrat
fbarrat at linux.vnet.ibm.com
Tue Feb 6 00:36:03 AEDT 2018
Le 31/01/2018 à 10:34, Andrew Donnellan a écrit :
> Add OpenCAPI platform data for the zaius and zz platforms, as well as the
> generic platform that's used for BML boots. Currently, all three platforms
> are identical, but that won't always be the case (e.g. Witherspoon).
>
> Additionally, for Zaius, hardcode link information and the I2C bus that's
> required to reset OpenCAPI devices, because this currently can't be
> extracted from HDAT. Eventually this will go away once Hostboot adds the
> relevant data in HDAT. A later patch will add this for ZZ once we've done
> more testing.
>
> Signed-off-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
> ---
>
> v1->v2:
>
> - Remove extraneous break that stops things after the first CPU (Fred)
> - Remove i2c odl01 data (Fred)
> - Remove i2c 1.8v hack (Fred)
> - Don't try to create device tree nodes on zaius if they already exist
> (Fred)
>
> v2->v3:
>
> - Reverse bit order of lane masks
>
> ** Depends on https://patchwork.ozlabs.org/patch/865155/ **
> ---
> core/platform.c | 11 +++++-
> platforms/astbmc/zaius.c | 96 +++++++++++++++++++++++++++++++++++++++++-
> platforms/ibm-fsp/zz.c | 11 +++++-
> 3 files changed, 118 insertions(+)
>
> diff --git a/core/platform.c b/core/platform.c
> index 6816fe5..f09ea3c 100644
> --- a/core/platform.c
> +++ b/core/platform.c
> @@ -168,6 +168,16 @@ static int generic_start_preload_resource(enum resource_id id, uint32_t subid,
> return OPAL_EMPTY;
> }
>
> +/* These values will work for a ZZ booted using BML */
> +const struct platform_ocapi generic_ocapi = {
> + .i2c_engine = 1,
> + .i2c_port = 4,
> + .i2c_offset = { 0x3, 0x1, 0x1 },
> + .i2c_odl0_data = { 0xFD, 0xFD, 0xFF },
> + .i2c_odl1_data = { 0xBF, 0xBF, 0xFF },
> + .odl_phy_swap = true,
> +};
> +
> static struct bmc_platform generic_bmc = {
> .name = "generic",
> };
> @@ -183,6 +193,7 @@ static struct platform generic_platform = {
> .cec_power_down = generic_cec_power_down,
> .start_preload_resource = generic_start_preload_resource,
> .resource_loaded = generic_resource_loaded,
> + .ocapi = &generic_ocapi,
> };
>
> const struct bmc_platform *bmc_platform = &generic_bmc;
> diff --git a/platforms/astbmc/zaius.c b/platforms/astbmc/zaius.c
> index 74c7f13..d706464 100644
> --- a/platforms/astbmc/zaius.c
> +++ b/platforms/astbmc/zaius.c
> @@ -24,6 +24,98 @@
>
> #include "astbmc.h"
>
> +const struct platform_ocapi zaius_ocapi = {
> + .i2c_engine = 1,
> + .i2c_port = 4,
> + .i2c_offset = { 0x3, 0x1, 0x1 },
> + .i2c_odl0_data = { 0xFD, 0xFD, 0xFF },
> + .i2c_odl1_data = { 0xBF, 0xBF, 0xFF },
> + .odl_phy_swap = true,
> +};
> +
> +#define NPU_BASE 0x5011000
> +#define NPU_SIZE 0x2c
> +#define NPU_INDIRECT0 0x8000000009010c3f /* OB0 - no OB3 on Zaius */
> +
> +/* OpenCAPI only */
> +static void create_link(struct dt_node *npu, int group, int index)
> +{
> + struct dt_node *link;
> + uint32_t lane_mask;
> + char namebuf[32];
> +
> + snprintf(namebuf, sizeof(namebuf), "link@%x", index);
> + link = dt_new(npu, namebuf);
> +
> + dt_add_property_string(link, "compatible", "ibm,npu-link-opencapi");
> + dt_add_property_cells(link, "ibm,npu-link-index", index);
> +
> + switch (index) {
> + case 2:
> + lane_mask = 0xf1e000; /* 0-3, 7-10 */
> + break;
> + case 3:
> + lane_mask = 0x00078f; /* 13-16, 20-23 */
> + break;
> + default:
> + assert(0);
> + }
> +
> + dt_add_property_u64s(link, "ibm,npu-phy", NPU_INDIRECT0);
> + dt_add_property_cells(link, "ibm,npu-lane-mask", lane_mask);
> + dt_add_property_cells(link, "ibm,npu-group-id", group);
> +}
> +
> +/* FIXME: Get rid of this after we get NPU information properly via HDAT/MRW */
> +static void zaius_create_npu(void)
> +{
> + struct dt_node *xscom, *npu;
> + int npu_index = 0;
> + int phb_index = 7;
> + char namebuf[32];
> +
> + /* Abort if there's already an NPU in the device tree */
> + if (dt_find_compatible_node(dt_root, NULL, "ibm,power9-npu"))
> + return;
> +
> + prlog(PR_DEBUG, "OCAPI: Adding NPU device nodes\n");
> + dt_for_each_compatible(dt_root, xscom, "ibm,xscom") {
> + snprintf(namebuf, sizeof(namebuf), "npu@%x", NPU_BASE);
> + npu = dt_new(xscom, namebuf);
> + dt_add_property_cells(npu, "reg", NPU_BASE, NPU_SIZE);
> + dt_add_property_strings(npu, "compatible", "ibm,power9-npu");
> + dt_add_property_cells(npu, "ibm,npu-index", npu_index++);
> + dt_add_property_cells(npu, "ibm,phb-index", phb_index++);
> + dt_add_property_cells(npu, "ibm,npu-links", 2);
> + create_link(npu, 1, 2);
> + create_link(npu, 2, 3);
> + }
> +}
> +
> +/* FIXME: Get rid of this after we get NPU information properly via HDAT/MRW */
> +static void zaius_create_ocapi_i2c_bus(void)
> +{
> + struct dt_node *xscom, *i2cm, *i2c_bus;
> + prlog(PR_DEBUG, "OCAPI: Adding I2C bus device node for OCAPI reset\n");
> + dt_for_each_compatible(dt_root, xscom, "ibm,xscom") {
> + i2cm = dt_find_by_name(xscom, "i2cm at a1000");
> + if (!i2cm) {
> + prlog(PR_ERR, "OCAPI: Failed to add I2C bus device node\n");
> + continue;
> + }
> +
> + if (dt_find_by_name(i2cm, "i2c-bus at 4"))
> + continue;
> +
> + i2c_bus = dt_new_addr(i2cm, "i2c-bus", 4);
> + dt_add_property_cells(i2c_bus, "reg", 4);
> + dt_add_property_cells(i2c_bus, "bus-frequency", 0x61a80);
> + dt_add_property_strings(i2c_bus, "compatible",
> + "ibm,opal-i2c", "ibm,power8-i2c-port",
> + "ibm,power9-i2c-port");
> + }
> +}
> +
> static bool zaius_probe(void)
> {
> if (!dt_node_is_compatible(dt_root, "ingrasys,zaius"))
> @@ -35,6 +127,9 @@ static bool zaius_probe(void)
> /* Setup UART for direct use by Linux */
> uart_set_console_policy(UART_CONSOLE_OS);
>
> + zaius_create_npu();
> + zaius_create_ocapi_i2c_bus();
> +
> return true;
> }
>
> @@ -52,4 +147,5 @@ DECLARE_PLATFORM(zaius) = {
> .elog_commit = ipmi_elog_commit,
> .exit = ipmi_wdt_final_reset,
> .terminate = ipmi_terminate,
> + .ocapi = &zaius_ocapi,
> };
> diff --git a/platforms/ibm-fsp/zz.c b/platforms/ibm-fsp/zz.c
> index a8150b8..9a84929 100644
> --- a/platforms/ibm-fsp/zz.c
> +++ b/platforms/ibm-fsp/zz.c
> @@ -27,6 +27,16 @@
> #include "ibm-fsp.h"
> #include "lxvpd.h"
>
> +/* We don't yet create NPU device nodes on ZZ, but these values are correct */
> +const struct platform_ocapi zz_ocapi = {
> + .i2c_engine = 1,
> + .i2c_port = 4,
> + .i2c_offset = { 0x3, 0x1, 0x1 },
> + .i2c_odl0_data = { 0xFD, 0xFD, 0xFF },
> + .i2c_odl1_data = { 0xBF, 0xBF, 0xFF },
> + .odl_phy_swap = true,
> +};
> +
> static bool zz_probe(void)
> {
> /* FIXME: make this neater when the dust settles */
> @@ -71,4 +81,5 @@ DECLARE_PLATFORM(zz) = {
> .resource_loaded = fsp_resource_loaded,
> .sensor_read = ibm_fsp_sensor_read,
> .terminate = ibm_fsp_terminate,
> + .ocapi = &zz_ocapi,
> };
>
More information about the Skiboot
mailing list