[Skiboot] [PATCH v2 5/6] hw/npu2, platform: Restructure OpenCAPI i2c reset/presence pins
Oliver
oohall at gmail.com
Thu Aug 30 17:57:56 AEST 2018
On Mon, Aug 27, 2018 at 6:55 PM, Andrew Donnellan
<andrew.donnellan at au1.ibm.com> wrote:
> In platform_ocapi, we define i2c_{reset,presence}_odl{0,1} to specify the
> appropriate reset/presence GPIO pins for devices connected to ODL0 and ODL1
> respectively.
>
> This is obviously wrong, because a device connected to brick 2 and a device
> connected to brick 4 are going to be different devices connected to
> different I2C pins, but rather conveniently we haven't had to deal with
> systems that can use the full 4 bricks as yet. Now that we're adding
> OpenCAPI support for Witherspoon, we should change this to specify pins
> separately for all 4 bricks.
> Replace i2c_{reset,presence}_odl{0,1} with
> i2c_{reset,presence}_pin{2,3,4,5} and update the presence detection code,
> device reset code, and existing platforms accordingly.
hmm
> Signed-off-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
>
> ---
> v1->v2:
> - rename the i2c fields from pin* to brick* to be clearer (Oliver)
You missed a spot ;)
I'm not overly bothered though. I mean really, who reads commit messages?
Reviewed-by: Oliver O'Halloran <oohall at gmail.com>
> ---
> core/platform.c | 24 ++++++++++++++----------
> hw/npu2-common.c | 9 +++++++--
> hw/npu2-opencapi.c | 10 +++++++---
> include/platform.h | 12 ++++++++----
> platforms/astbmc/zaius.c | 22 +++++++++++++---------
> platforms/ibm-fsp/zz.c | 24 ++++++++++++++----------
> 6 files changed, 63 insertions(+), 38 deletions(-)
>
> diff --git a/core/platform.c b/core/platform.c
> index 4b3eaa4bd1d1..7985ce564509 100644
> --- a/core/platform.c
> +++ b/core/platform.c
> @@ -172,21 +172,25 @@ static int generic_start_preload_resource(enum resource_id id, uint32_t subid,
>
> /* These values will work for a ZZ booted using BML */
> const struct platform_ocapi generic_ocapi = {
> - .i2c_engine = 1,
> - .i2c_port = 4,
> - .i2c_reset_addr = 0x20,
> - .i2c_reset_odl0 = (1 << 1),
> - .i2c_reset_odl1 = (1 << 6),
> - .i2c_presence_addr = 0x20,
> - .i2c_presence_odl0 = (1 << 2), /* bottom connector */
> - .i2c_presence_odl1 = (1 << 7), /* top connector */
> + .i2c_engine = 1,
> + .i2c_port = 4,
> + .i2c_reset_addr = 0x20,
> + .i2c_reset_brick2 = (1 << 1),
> + .i2c_reset_brick3 = (1 << 6),
> + .i2c_reset_brick4 = 0, /* unused */
> + .i2c_reset_brick5 = 0, /* unused */
> + .i2c_presence_addr = 0x20,
> + .i2c_presence_brick2 = (1 << 2), /* bottom connector */
> + .i2c_presence_brick3 = (1 << 7), /* top connector */
> + .i2c_presence_brick4 = 0, /* unused */
> + .i2c_presence_brick5 = 0, /* unused */
> /*
> * The ZZs we typically use for BML/generic platform tend to
> * have old planars and presence detection is broken there, so
> * force presence.
> */
> - .force_presence = true,
> - .odl_phy_swap = true,
> + .force_presence = true,
> + .odl_phy_swap = true,
> };
>
> static struct bmc_platform generic_bmc = {
> diff --git a/hw/npu2-common.c b/hw/npu2-common.c
> index b87d43469d5b..d60dda19dd3c 100644
> --- a/hw/npu2-common.c
> +++ b/hw/npu2-common.c
> @@ -115,11 +115,16 @@ static bool _i2c_presence_detect(struct npu2_dev *dev)
>
> switch (dev->link_index) {
> case 2:
> - data = platform.ocapi->i2c_presence_odl0;
> + data = platform.ocapi->i2c_presence_brick2;
> break;
> case 3:
> - data = platform.ocapi->i2c_presence_odl1;
> + data = platform.ocapi->i2c_presence_brick3;
> break;
> + case 4:
> + data = platform.ocapi->i2c_presence_brick4;
> + break;
> + case 5:
> + data = platform.ocapi->i2c_presence_brick5;
> default:
> OCAPIERR(dev, "presence detection on invalid link\n");
> return true;
> diff --git a/hw/npu2-opencapi.c b/hw/npu2-opencapi.c
> index fa28633bb150..decdfafb07db 100644
> --- a/hw/npu2-opencapi.c
> +++ b/hw/npu2-opencapi.c
> @@ -816,12 +816,16 @@ static void assert_reset(struct npu2_dev *dev)
>
> switch (dev->brick_index) {
> case 2:
> - case 4:
> - pin = platform.ocapi->i2c_reset_odl0;
> + pin = platform.ocapi->i2c_reset_brick2;
> break;
> case 3:
> + pin = platform.ocapi->i2c_reset_brick3;
> + break;
> + case 4:
> + pin = platform.ocapi->i2c_reset_brick4;
> + break;
> case 5:
> - pin = platform.ocapi->i2c_reset_odl1;
> + pin = platform.ocapi->i2c_reset_brick5;
> break;
> default:
> assert(false);
> diff --git a/include/platform.h b/include/platform.h
> index efafbd2239b9..fee5a76cf9e8 100644
> --- a/include/platform.h
> +++ b/include/platform.h
> @@ -50,11 +50,15 @@ struct platform_ocapi {
> uint8_t i2c_engine; /* I2C engine number */
> uint8_t i2c_port; /* I2C port number */
> uint8_t i2c_reset_addr; /* I2C address for reset */
> - uint8_t i2c_reset_odl0; /* I2C pin to write to reset ODL0 */
> - uint8_t i2c_reset_odl1; /* I2C pin to write to reset ODL1 */
> + uint8_t i2c_reset_brick2; /* I2C pin to write to reset brick 2 */
> + uint8_t i2c_reset_brick3; /* I2C pin to write to reset brick 3 */
> + uint8_t i2c_reset_brick4; /* I2C pin to write to reset brick 4 */
> + uint8_t i2c_reset_brick5; /* I2C pin to write to reset brick 5 */
> uint8_t i2c_presence_addr; /* I2C address for presence detection */
> - uint8_t i2c_presence_odl0; /* I2C mask for detection on ODL0 */
> - uint8_t i2c_presence_odl1; /* I2C mask for detection on ODL1 */
> + uint8_t i2c_presence_brick2; /* I2C pin to read for presence on brick 2 */
> + uint8_t i2c_presence_brick3; /* I2C pin to read for presence on brick 3 */
> + uint8_t i2c_presence_brick4; /* I2C pin to read for presence on brick 4 */
> + uint8_t i2c_presence_brick5; /* I2C pin to read for presence on brick 5 */
> bool force_presence; /* don't use i2c detection */
> bool odl_phy_swap; /* Swap ODL1 to use brick 2 rather than
> * brick 1 lanes */
> diff --git a/platforms/astbmc/zaius.c b/platforms/astbmc/zaius.c
> index 267e6578bbe7..0eed10c706d0 100644
> --- a/platforms/astbmc/zaius.c
> +++ b/platforms/astbmc/zaius.c
> @@ -26,15 +26,19 @@
> #include "astbmc.h"
>
> const struct platform_ocapi zaius_ocapi = {
> - .i2c_engine = 1,
> - .i2c_port = 4,
> - .i2c_reset_addr = 0x20,
> - .i2c_reset_odl0 = (1 << 1),
> - .i2c_reset_odl1 = (1 << 6),
> - .i2c_presence_addr = 0x20,
> - .i2c_presence_odl0 = (1 << 2), /* bottom connector */
> - .i2c_presence_odl1 = (1 << 7), /* top connector */
> - .odl_phy_swap = true,
> + .i2c_engine = 1,
> + .i2c_port = 4,
> + .i2c_reset_addr = 0x20,
> + .i2c_reset_brick2 = (1 << 1),
> + .i2c_reset_brick3 = (1 << 6),
> + .i2c_reset_brick4 = 0, /* unused */
> + .i2c_reset_brick5 = 0, /* unused */
> + .i2c_presence_addr = 0x20,
> + .i2c_presence_brick2 = (1 << 2), /* bottom connector */
> + .i2c_presence_brick3 = (1 << 7), /* top connector */
> + .i2c_presence_brick4 = 0, /* unused */
> + .i2c_presence_brick5 = 0, /* unused */
> + .odl_phy_swap = true,
> };
>
> #define NPU_BASE 0x5011000
> diff --git a/platforms/ibm-fsp/zz.c b/platforms/ibm-fsp/zz.c
> index dc48768b8a96..e4ff981c9c1b 100644
> --- a/platforms/ibm-fsp/zz.c
> +++ b/platforms/ibm-fsp/zz.c
> @@ -29,20 +29,24 @@
>
> /* We don't yet create NPU device nodes on ZZ, but these values are correct */
> const struct platform_ocapi zz_ocapi = {
> - .i2c_engine = 1,
> - .i2c_port = 4,
> - .i2c_reset_addr = 0x20,
> - .i2c_reset_odl0 = (1 << 1),
> - .i2c_reset_odl1 = (1 << 6),
> - .i2c_presence_addr = 0x20,
> - .i2c_presence_odl0 = (1 << 2), /* bottom connector */
> - .i2c_presence_odl1 = (1 << 7), /* top connector */
> + .i2c_engine = 1,
> + .i2c_port = 4,
> + .i2c_reset_addr = 0x20,
> + .i2c_reset_brick2 = (1 << 1),
> + .i2c_reset_brick3 = (1 << 6),
> + .i2c_reset_brick4 = 0, /* unused */
> + .i2c_reset_brick5 = 0, /* unused */
> + .i2c_presence_addr = 0x20,
> + .i2c_presence_brick2 = (1 << 2), /* bottom connector */
> + .i2c_presence_brick3 = (1 << 7), /* top connector */
> + .i2c_presence_brick4 = 0, /* unused */
> + .i2c_presence_brick5 = 0, /* unused */
> /*
> * i2c presence detection is broken on ZZ planar < v4 so we
> * force the presence until all our systems are upgraded
> */
> - .force_presence = true,
> - .odl_phy_swap = true,
> + .force_presence = true,
> + .odl_phy_swap = true,
> };
>
> static bool zz_probe(void)
> --
> git-series 0.9.1
>
More information about the Skiboot
mailing list