[Skiboot] [PATCH v2 4/6] hw/npu2, platform: Add NPU2 platform device detection callback

Andrew Donnellan andrew.donnellan at au1.ibm.com
Mon Aug 27 18:55:53 AEST 2018


There is no standardised way to determine the presence and type of devices
connected to an NPU on POWER9.

Currently, we hardcode device types based on platform type (as no platform
currently supports both OpenCAPI and NVLink), and for OpenCAPI platforms
we use I2C to detect presence.

Witherspoon (and potentially other platforms later on) supports both
NVLink and OpenCAPI, and additionally uses SXM2 connectors which can carry
more than one link, rather than the SlimSAS connectors used for OpenCAPI on
Zaius and ZZ. This necessitates some special handling.

Add a platform callback for NPU device detection. In a later patch, we
will use this to implement Witherspoon-specific device detection. For now,
add a Witherspoon stub that sets all links to NVLink (i.e. current
behaviour).

Move the existing I2C-based presence detection for OpenCAPI devices on
Zaius/ZZ into common code, which we use by default for platforms which do
not define a callback. Clean up the use of the ibm,npu-link-type property,
which will now be exposed solely for debugging and not consumed internally.

Signed-off-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>

---
v1->v2:
- turn the "generic" i2c detection code into a callback (Alistair)
---
 core/platform.c                |   2 +-
 hdata/spira.c                  |   1 +-
 hw/npu2-common.c               | 103 +++++++++++++++++++++++++++++-----
 hw/npu2-opencapi.c             |  85 +---------------------------
 include/npu2.h                 |  14 ++++-
 include/platform.h             |   4 +-
 platforms/astbmc/witherspoon.c |  10 +++-
 platforms/astbmc/zaius.c       |   3 +-
 8 files changed, 125 insertions(+), 97 deletions(-)

diff --git a/core/platform.c b/core/platform.c
index b32cbf5ce9d1..4b3eaa4bd1d1 100644
--- a/core/platform.c
+++ b/core/platform.c
@@ -25,6 +25,7 @@
 #include <errorlog.h>
 #include <bt.h>
 #include <nvram.h>
+#include <npu2.h>
 #include <platforms/astbmc/astbmc.h>
 
 bool manufacturing_mode = false;
@@ -204,6 +205,7 @@ static struct platform generic_platform = {
 	.start_preload_resource	= generic_start_preload_resource,
 	.resource_loaded	= generic_resource_loaded,
 	.ocapi		= &generic_ocapi,
+	.npu2_device_detect = npu2_i2c_presence_detect, /* Assumes ZZ */
 };
 
 const struct bmc_platform *bmc_platform = &generic_bmc;
diff --git a/hdata/spira.c b/hdata/spira.c
index c820c4daf26e..189584d5ddb6 100644
--- a/hdata/spira.c
+++ b/hdata/spira.c
@@ -1490,7 +1490,6 @@ static void add_npu(struct dt_node *xscom, const struct HDIF_array_hdr *links,
 		}
 
 		dt_add_property_string(node, "compatible", "ibm,npu-link");
-		dt_add_property_string(node, "ibm,npu-link-type", "nvlink");
 		dt_add_property_cells(node, "reg", link_count);
 		dt_add_property_cells(node, "ibm,npu-link-index", link_count);
 		dt_add_property_cells(node, "ibm,workbook-link-id", link_id);
diff --git a/hw/npu2-common.c b/hw/npu2-common.c
index 7346e704fc93..b87d43469d5b 100644
--- a/hw/npu2-common.c
+++ b/hw/npu2-common.c
@@ -21,19 +21,7 @@
 #include <npu2-regs.h>
 #include <bitutils.h>
 #include <nvram.h>
-
-enum npu2_dev_type npu2_dt_link_dev_type(struct dt_node *link)
-{
-	const char *link_type = dt_prop_get(link, "ibm,npu-link-type") ?:
-		"unknown";
-	if (streq(link_type, "nvlink")) {
-		return NPU2_DEV_TYPE_NVLINK;
-	} else if (streq(link_type, "opencapi")) {
-		return NPU2_DEV_TYPE_OPENCAPI;
-	} else {
-		return NPU2_DEV_TYPE_UNKNOWN;
-	}
-}
+#include <i2c.h>
 
 /*
  * We use the indirect method because it uses the same addresses as
@@ -109,12 +97,62 @@ void npu2_write_mask_4b(struct npu2 *p, uint64_t reg, uint32_t val, uint32_t mas
 			(uint64_t)new_val << 32);
 }
 
+static bool _i2c_presence_detect(struct npu2_dev *dev)
+{
+	uint8_t state, data;
+	int rc;
+
+	rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
+			platform.ocapi->i2c_presence_addr,
+			SMBUS_READ, 0, 1,
+			&state, 1, 120);
+	if (rc) {
+		OCAPIERR(dev, "error detecting link presence: %d\n", rc);
+		return true; /* assume link exists */
+	}
+
+	OCAPIDBG(dev, "I2C presence detect: 0x%x\n", state);
+
+	switch (dev->link_index) {
+	case 2:
+		data = platform.ocapi->i2c_presence_odl0;
+		break;
+	case 3:
+		data = platform.ocapi->i2c_presence_odl1;
+		break;
+	default:
+		OCAPIERR(dev, "presence detection on invalid link\n");
+		return true;
+	}
+	/* Presence detect bits are active low */
+	return !(state & data);
+}
+
+/*
+ * A default presence detection implementation for platforms like ZZ and Zaius
+ * that don't implement their own. Assumes all devices found will be OpenCAPI.
+ */
+void npu2_i2c_presence_detect(struct npu2 *npu)
+{
+	struct npu2_dev *dev;
+	assert(platform.ocapi);
+	for (int i = 0; i < npu->total_devices; i++) {
+		dev = &npu->devices[i];
+		if (platform.ocapi->force_presence ||
+		    _i2c_presence_detect(dev))
+			dev->type = NPU2_DEV_TYPE_OPENCAPI;
+		else
+			dev->type = NPU2_DEV_TYPE_UNKNOWN;
+	}
+}
+
 static struct npu2 *setup_npu(struct dt_node *dn)
 {
 	struct npu2 *npu;
 	struct npu2_dev *dev;
 	struct dt_node *np;
 	uint32_t num_links;
+	char port_name[17];
 	void *npumem;
 	char *path;
 	int gcid;
@@ -138,6 +176,27 @@ static struct npu2 *setup_npu(struct dt_node *dn)
 	npu->chip_id = gcid;
 	npu->xscom_base = dt_get_address(dn, 0, NULL);
 	npu->phb_index = dt_prop_get_u32(dn, "ibm,phb-index");
+
+	if (platform.ocapi) {
+		/* Find I2C port for handling device presence/reset */
+		snprintf(port_name, sizeof(port_name), "p8_%08x_e%dp%d",
+			 gcid, platform.ocapi->i2c_engine,
+			 platform.ocapi->i2c_port);
+		prlog(PR_DEBUG, "NPU: Looking for I2C port %s\n", port_name);
+
+		dt_for_each_compatible(dt_root, np, "ibm,power9-i2c-port") {
+			if (streq(port_name, dt_prop_get(np, "ibm,port-name"))) {
+				npu->i2c_port_id_ocapi = dt_prop_get_u32(np, "ibm,opal-id");
+				break;
+			}
+		}
+
+		if (!npu->i2c_port_id_ocapi) {
+			prlog(PR_ERR, "NPU: Couldn't find I2C port %s\n",
+			      port_name);
+		}
+	}
+
 	npu->devices = npumem + sizeof(struct npu2);
 
 	dt_for_each_compatible(dn, np, "ibm,npu-link") {
@@ -145,7 +204,8 @@ static struct npu2 *setup_npu(struct dt_node *dn)
 		dev->link_index = dt_prop_get_u32(np, "ibm,npu-link-index");
 		/* May be overridden by platform presence detection */
 		dev->brick_index = dev->link_index;
-		dev->type = npu2_dt_link_dev_type(np);
+		/* Will be overridden by presence detection */
+		dev->type = NPU2_DEV_TYPE_UNKNOWN;
 		dev->npu = npu;
 		dev->dt_node = np;
 		dev->pl_xscom_base = dt_prop_get_u64(np, "ibm,npu-phy");
@@ -176,13 +236,22 @@ static void setup_devices(struct npu2 *npu)
 		switch (dev->type) {
 		case NPU2_DEV_TYPE_NVLINK:
 			nvlink_detected = true;
+			dt_add_property_strings(dev->dt_node,
+						"ibm,npu-link-type",
+						"nvlink");
 			break;
 		case NPU2_DEV_TYPE_OPENCAPI:
 			ocapi_detected = true;
+			dt_add_property_strings(dev->dt_node,
+						"ibm,npu-link-type",
+						"opencapi");
 			break;
 		default:
 			prlog(PR_INFO, "NPU: Link %d device not present\n",
 			      npu->devices[i].link_index);
+			dt_add_property_strings(dev->dt_node,
+						"ibm,npu-link-type",
+						"unknown");
 		}
 	}
 
@@ -220,8 +289,14 @@ void probe_npu2(void)
 		prlog(PR_WARNING, "NPU2: Using ZCAL impedance override = %d\n", nv_zcal_nominal);
 	}
 
+	if (!platform.npu2_device_detect) {
+		prlog(PR_INFO, "NPU: Platform does not support NPU\n");
+		return;
+	}
+
 	dt_for_each_compatible(dt_root, np, "ibm,power9-npu") {
 	        npu = setup_npu(np);
+		platform.npu2_device_detect(npu);
 		setup_devices(npu);
 	}
 }
diff --git a/hw/npu2-opencapi.c b/hw/npu2-opencapi.c
index ead8ec011341..fa28633bb150 100644
--- a/hw/npu2-opencapi.c
+++ b/hw/npu2-opencapi.c
@@ -52,14 +52,6 @@
 #include <i2c.h>
 #include <nvram.h>
 
-#define OCAPIDBG(dev, fmt, a...)    prlog(PR_DEBUG, "OCAPI[%d:%d]: " fmt, \
-					  dev->npu->chip_id, dev->brick_index, ## a)
-#define OCAPIINF(dev, fmt, a...)    prlog(PR_INFO, "OCAPI[%d:%d]: " fmt, \
-					  dev->npu->chip_id, dev->brick_index, ## a)
-#define OCAPIERR(dev, fmt, a...)    prlog(PR_ERR, "OCAPI[%d:%d]: " fmt, \
-					  dev->npu->chip_id, dev->brick_index, ## a)
-
-
 #define NPU_IRQ_LEVELS		35
 #define NPU_IRQ_LEVELS_XSL	23
 #define MAX_PE_HANDLE		((1 << 15) - 1)
@@ -842,7 +834,7 @@ static void assert_reset(struct npu2_dev *dev)
 	 * register and a pin is in output mode if its value is 0
 	 */
 	data = ~pin;
-	rc = i2c_request_send(dev->i2c_port_id_ocapi,
+	rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
 			platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
 			0x3, 1,
 			&data, sizeof(data), 120);
@@ -851,7 +843,7 @@ static void assert_reset(struct npu2_dev *dev)
 
 	/* register 1 controls the signal, reset is active low */
 	data = ~pin;
-	rc = i2c_request_send(dev->i2c_port_id_ocapi,
+	rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
 			platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
 			0x1, 1,
 			&data, sizeof(data), 120);
@@ -874,7 +866,7 @@ static void deassert_reset(struct npu2_dev *dev)
 	int rc;
 
 	data = 0xFF;
-	rc = i2c_request_send(dev->i2c_port_id_ocapi,
+	rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
 			platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
 			0x1, 1,
 			&data, sizeof(data), 120);
@@ -888,43 +880,6 @@ static void deassert_reset(struct npu2_dev *dev)
 	}
 }
 
-static bool i2c_presence_detect(struct npu2_dev *dev)
-{
-	uint8_t state, data;
-	int rc;
-
-	/*
-	 * Opencapi presence detection is done through i2c
-	 *
-	 * Lagrange platforms (ZZ, Zaius) use the same default mechanism.
-	 * Witherspoon will need a specific implementation, TBD.
-	 */
-	rc = i2c_request_send(dev->i2c_port_id_ocapi,
-			platform.ocapi->i2c_presence_addr,
-			SMBUS_READ, 0, 1,
-			&state, 1, 120);
-	if (rc) {
-		OCAPIERR(dev, "error detecting link presence: %d\n", rc);
-		return true; /* assume link exists */
-	}
-
-	OCAPIDBG(dev, "I2C presence detect: 0x%x\n", state);
-
-	switch (dev->brick_index) { // TODO(ajd): Link or brick index?
-	case 2:
-		data = platform.ocapi->i2c_presence_odl0;
-		break;
-	case 3:
-		data = platform.ocapi->i2c_presence_odl1;
-		break;
-	default:
-		OCAPIERR(dev, "presence detection on invalid link\n");
-		return true;
-	}
-	/* Presence detect bits are active low */
-	return !(state & data);
-}
-
 static void reset_odl(uint32_t gcid, struct npu2_dev *dev)
 {
 	uint64_t reg, config_xscom;
@@ -1015,17 +970,10 @@ static void start_training(uint32_t gcid, struct npu2_dev *dev)
 	xscom_write(gcid, config_xscom, reg);
 }
 
-static int64_t npu2_opencapi_get_presence_state(struct pci_slot *slot,
+static int64_t npu2_opencapi_get_presence_state(struct pci_slot __unused *slot,
 						uint8_t *val)
 {
-	bool present;
-	struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
-
-	if (platform.ocapi->force_presence)
-		present = true;
-	else
-		present = i2c_presence_detect(dev);
-	*val = present;
+	*val = true;
 	return OPAL_SUCCESS;
 }
 
@@ -1581,9 +1529,8 @@ static void setup_debug_training_state(struct npu2_dev *dev)
 
 static void setup_device(struct npu2_dev *dev)
 {
-	struct dt_node *dn_phb, *dn;
+	struct dt_node *dn_phb;
 	struct pci_slot *slot;
-	char port_name[17];
 	uint64_t mm_win[2];
 
 	/* Populate PHB device node */
@@ -1629,23 +1576,6 @@ static void setup_device(struct npu2_dev *dev)
 	dev->bdfn = 0;
 	dev->train_need_fence = false;
 	dev->train_fenced = false;
-	/* Find I2C port for handling device reset */
-	snprintf(port_name, sizeof(port_name), "p8_%08x_e%dp%d",
-		 dev->npu->chip_id, platform.ocapi->i2c_engine,
-		 platform.ocapi->i2c_port);
-	prlog(PR_DEBUG, "OCAPI: Looking for I2C port %s\n", port_name);
-
-	dt_for_each_compatible(dt_root, dn, "ibm,power9-i2c-port") {
-		if (streq(port_name, dt_prop_get(dn, "ibm,port-name"))) {
-			dev->i2c_port_id_ocapi = dt_prop_get_u32(dn, "ibm,opal-id");
-			break;
-		}
-	}
-
-	if (!dev->i2c_port_id_ocapi) {
-		prlog(PR_ERR, "OCAPI: Couldn't find I2C port %s\n", port_name);
-		goto failed;
-	}
 
 	/* TODO: Procedure 13.1.3.7 - AFU Memory Range BARs */
 	/* Procedure 13.1.3.8 - AFU MMIO Range BARs */
@@ -1670,9 +1600,6 @@ static void setup_device(struct npu2_dev *dev)
 	}
 	pci_register_phb(&dev->phb_ocapi, OPAL_DYNAMIC_PHB_ID);
 	return;
-failed:
-	dt_add_property_string(dn_phb, "status", "error");
-	return;
 }
 
 static void read_nvram_training_state(void)
diff --git a/include/npu2.h b/include/npu2.h
index 9fdc438bb4c1..6d28fd3e58f4 100644
--- a/include/npu2.h
+++ b/include/npu2.h
@@ -17,6 +17,7 @@
 #ifndef __NPU2_H
 #define __NPU2_H
 
+#include <pci.h>
 #include <phys-map.h>
 
 /* Debugging options */
@@ -36,6 +37,14 @@
 #define NPU2DEVINF(p, fmt, a...)	NPU2DEVLOG(PR_INFO, p, fmt, ##a)
 #define NPU2DEVERR(p, fmt, a...)	NPU2DEVLOG(PR_ERR, p, fmt, ##a)
 
+#define OCAPIDBG(dev, fmt, a...)    prlog(PR_DEBUG, "OCAPI[%d:%d]: " fmt, \
+					  dev->npu->chip_id, dev->brick_index, ## a)
+#define OCAPIINF(dev, fmt, a...)    prlog(PR_INFO, "OCAPI[%d:%d]: " fmt, \
+					  dev->npu->chip_id, dev->brick_index, ## a)
+#define OCAPIERR(dev, fmt, a...)    prlog(PR_ERR, "OCAPI[%d:%d]: " fmt, \
+					  dev->npu->chip_id, dev->brick_index, ## a)
+
+
 /* Number of PEs supported */
 #define NPU2_MAX_PE_NUM		16
 #define NPU2_RESERVED_PE_NUM	15
@@ -136,7 +145,6 @@ struct npu2_dev {
 
 	/* OpenCAPI */
 	struct phb		phb_ocapi;
-	uint64_t		i2c_port_id_ocapi;
 	bool			train_need_fence;
 	bool			train_fenced;
 };
@@ -169,6 +177,8 @@ struct npu2 {
 	/* NVLink */
 	struct phb	phb_nvlink;
 	uint32_t	phb_index;
+
+	uint64_t	i2c_port_id_ocapi;
 };
 
 static inline struct npu2 *phb_to_npu2_nvlink(struct phb *phb)
@@ -195,11 +205,11 @@ static inline struct phb *npu2_dev_to_phb(struct npu2_dev *ndev)
 	}
 }
 
+void npu2_i2c_presence_detect(struct npu2 *npu);
 int npu2_opencapi_init_npu(struct npu2 *npu);
 int npu2_nvlink_init_npu(struct npu2 *npu);
 void npu2_nvlink_create_phb(struct npu2 *npu, struct dt_node *dn);
 
-enum npu2_dev_type npu2_dt_link_dev_type(struct dt_node *link);
 void npu2_write_4b(struct npu2 *p, uint64_t reg, uint32_t val);
 uint32_t npu2_read_4b(struct npu2 *p, uint64_t reg);
 void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val);
diff --git a/include/platform.h b/include/platform.h
index 1a35a86a6f8b..efafbd2239b9 100644
--- a/include/platform.h
+++ b/include/platform.h
@@ -22,6 +22,7 @@ struct phb;
 struct pci_device;
 struct pci_slot;
 struct errorlog;
+struct npu2;
 
 enum resource_id {
 	RESOURCE_ID_KERNEL,
@@ -76,6 +77,9 @@ struct platform {
 	/* OpenCAPI platform-specific I2C information */
 	const struct platform_ocapi *ocapi;
 
+	/* NPU2 device detection */
+	void		(*npu2_device_detect)(struct npu2 *npu);
+
 	/*
 	 * Probe platform, return true on a match, called before
 	 * any allocation has been performed outside of the heap
diff --git a/platforms/astbmc/witherspoon.c b/platforms/astbmc/witherspoon.c
index d663709f8766..ce83ff9701d3 100644
--- a/platforms/astbmc/witherspoon.c
+++ b/platforms/astbmc/witherspoon.c
@@ -27,6 +27,7 @@
 #include <pci.h>
 #include <pci-slot.h>
 #include <phb4.h>
+#include <npu2.h>
 
 #include "astbmc.h"
 #include "ast.h"
@@ -153,6 +154,14 @@ static void witherspoon_pre_pci_fixup(void)
 	phb4_pre_pci_fixup_witherspoon();
 }
 
+static void witherspoon_npu2_device_detect(struct npu2 *npu)
+{
+        /* Stub until we implement real device detection */
+	for (int i = 0; i < npu->total_devices; i++) {
+		npu->devices[i].type = NPU2_DEV_TYPE_NVLINK;
+	}
+}
+
 /* The only difference between these is the PCI slot handling */
 
 DECLARE_PLATFORM(witherspoon) = {
@@ -170,4 +179,5 @@ DECLARE_PLATFORM(witherspoon) = {
 	.terminate		= ipmi_terminate,
 
 	.pci_get_slot_info	= dt_slot_get_slot_info,
+	.npu2_device_detect	= witherspoon_npu2_device_detect,
 };
diff --git a/platforms/astbmc/zaius.c b/platforms/astbmc/zaius.c
index 2f296c3679ac..267e6578bbe7 100644
--- a/platforms/astbmc/zaius.c
+++ b/platforms/astbmc/zaius.c
@@ -21,6 +21,7 @@
 #include <ipmi.h>
 #include <psi.h>
 #include <npu-regs.h>
+#include <npu2.h>
 
 #include "astbmc.h"
 
@@ -51,7 +52,6 @@ static void create_link(struct dt_node *npu, int group, int index)
 	link = dt_new(npu, namebuf);
 
 	dt_add_property_string(link, "compatible", "ibm,npu-link");
-	dt_add_property_string(link, "ibm,npu-link-type", "opencapi");
 	dt_add_property_cells(link, "ibm,npu-link-index", index);
 
 	switch (index) {
@@ -153,4 +153,5 @@ DECLARE_PLATFORM(zaius) = {
 	.exit			= ipmi_wdt_final_reset,
 	.terminate		= ipmi_terminate,
 	.ocapi			= &zaius_ocapi,
+	.npu2_device_detect	= npu2_i2c_presence_detect,
 };
-- 
git-series 0.9.1



More information about the Skiboot mailing list