[Skiboot] [RFC PATCH 1/2] core: implement OPAL_SIGNAL_SYSTEM_RESET with POWER9 scoms

Benjamin Herrenschmidt benh at kernel.crashing.org
Wed Sep 13 09:18:34 AEST 2017


On Wed, 2017-09-13 at 02:05 +1000, Nicholas Piggin wrote:
> This implements a way to raise system reset interrupts on other
> cores. This has not yet been tested on DD2 or with deeper sleep
> states.

Reminds me, we need to workaround a bug with XSCOMs on P9

PSCOMs to core in the range 20010A80-20010Ab8 (list below) can fail
occasionally with an error of 4 (PCB_ADDRESS_ERROR). We need to
(silently) retry up to 32 times.

> 0000000020010A80 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SCOMC
> 0000000020010A81 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SCOMD
> 0000000020010A82 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.OCC_SCOMC
> 0000000020010A83 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.OCC_SCOMD
> 0000000020010A84 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SPR_MODE
> 0000000020010A85 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.CTRL
> 0000000020010A86 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SCR0
> 0000000020010A87 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SCR1
> 0000000020010A88 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SCR2
> 0000000020010A89 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SCR3
> 0000000020010A8E EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V0_HMER
> 0000000020010A92 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V0_HMER
> 0000000020010A8F EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V1_HMER
> 0000000020010A93 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V1_HMER
> 0000000020010A90 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V2_HMER
> 0000000020010A94 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V2_HMER
> 0000000020010A91 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V3_HMER
> 0000000020010A95 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.V3_HMER
> 0000000020010A96 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.HMEER
> 0000000020010A97 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SPATTN
> 0000000020010A98 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SPATTN
> 0000000020010A99 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SPATTN
> 0000000020010A9A EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SPATTN_MASK
> 0000000020010A9B EXP.EC.CC.PCC0.PMC.THREAD_INFO
> 0000000020010A9C EXP.EC.CC.PCC0.PMC.DIRECT_CONTROLS
> 0000000020010A9D ECP.PC.PMU.SPR_CORE.RAS_MODEREG
> 0000000020010A9E EXP.EC.CC.PCC0.COMMON.POW.THROTTLE_CONTROL
> 0000000020010A9F EXP.EC.CC.PCC0.TFDP.TFP.SPURR_FREQ_DETECT_CYC_CNT
> 0000000020010AA0 EXP.EC.CC.PCC0.TFDP.TFP.SPURR_FREQ_SCALE
> 0000000020010AA1 EXP.EC.CC.PCC0.TFDP.TFP.SPURR_FREQ_REF
> 0000000020010AA2 EXP.EC.CC.PCC0.TFDP.TFP.PWM_EVENTS
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_READ
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC000
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC001
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC010
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC011
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC100
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC101
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC110
> 0000000020010AA3 EXP.EC.CC.PCC0.TOD_SYNC111
> 0000000020010AA4 EXP.EC.CC.PCC0.COMMON.TFC.TOD_STEP_CHECK
> 0000000020010AA5 ECP.PC.PMU.SPR_CORE.SHID0
> 0000000020010AA6 ECP.PC.PMU.SPR_CORE.HV_STATE
> 0000000020010AA7 ECP.PC.PMU.SPR_CORE.CORE_FUSES
> 0000000020010AA8 ECP.PC.IMA.IMA_EVENT_MASK
> 0000000020010AA9 ECP.PC.IMA.IMA_TRACE
> 0000000020010AAA ECP.PC.T0_PMU_SCOM
> 0000000020010AAB ECP.PC.T1_PMU_SCOM
> 0000000020010AAC ECP.PC.T2_PMU_SCOM
> 0000000020010AAD ECP.PC.T3_PMU_SCOM
> 0000000020010AAE ECP.PC.PMU.PMUC.SIER_MASK
> 0000000020010AAF ECP.PC.PMU.PMUC.SRC_MASK
> 0000000020010AB0 ECP.PC.PMU.SPR_CORE.PMU_SCOMC
> 0000000020010AB2 ECP.PC.PMU.SPR_CORE.PMU_SCOMC_EN
> 0000000020010AB3 EXP.EC.CC.PCC0.PMC.CORE_THREAD_STATE
> 0000000020010AB4 ECP.PC.PMU.SPR_CORE.INV_ERATE
> 0000000020010AB5 ECP.PC.PMU.SPR_CORE.SPR_CORE_HOLD_OUT
> 0000000020010AB6 ECP.PC.PMU.SPR_CORE.PMU_HOLD_OUT
> 0000000020010AB7 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.TFAC_HOLD_OUT
> 0000000020010AB8 EXP.EC.CC.PCC0.COMMON.SPR_COMMON.SPR_COMMON_HOLD_OUT 
> ---
>  core/Makefile.inc       |   1 +
>  core/sreset.c           | 237 ++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/xscom.c              |   2 +
>  include/skiboot.h       |   3 +
>  platforms/mambo/mambo.c |   3 +-
>  5 files changed, 245 insertions(+), 1 deletion(-)
>  create mode 100644 core/sreset.c
> 
> diff --git a/core/Makefile.inc b/core/Makefile.inc
> index f2de2f64..16204978 100644
> --- a/core/Makefile.inc
> +++ b/core/Makefile.inc
> @@ -9,6 +9,7 @@ CORE_OBJS += vpd.o hostservices.o platform.o nvram.o nvram-format.o hmi.o
>  CORE_OBJS += console-log.o ipmi.o time-utils.o pel.o pool.o errorlog.o
>  CORE_OBJS += timer.o i2c.o rtc.o flash.o sensor.o ipmi-opal.o
>  CORE_OBJS += flash-subpartition.o bitmap.o buddy.o pci-quirk.o powercap.o psr.o
> +CORE_OBJS += sreset.o
>  
>  ifeq ($(SKIBOOT_GCOV),1)
>  CORE_OBJS += gcov-profiling.o
> diff --git a/core/sreset.c b/core/sreset.c
> new file mode 100644
> index 00000000..ff20fe71
> --- /dev/null
> +++ b/core/sreset.c
> @@ -0,0 +1,237 @@
> +/* Copyright 2017 IBM Corp.
> + *
> + * Licensed under the Apache License, Version 2.0 (the "License");
> + * you may not use this file except in compliance with the License.
> + * You may obtain a copy of the License at
> + *
> + * 	http://www.apache.org/licenses/LICENSE-2.0
> + *
> + * Unless required by applicable law or agreed to in writing, software
> + * distributed under the License is distributed on an "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> + * implied.
> + * See the License for the specific language governing permissions and
> + * limitations under the License.
> + */
> +
> +#include <skiboot.h>
> +#include <cpu.h>
> +#include <fsp.h>
> +#include <psi.h>
> +#include <opal.h>
> +#include <xscom.h>
> +#include <interrupts.h>
> +#include <cec.h>
> +#include <timebase.h>
> +#include <pci.h>
> +#include <chip.h>
> +#include <chiptod.h>
> +#include <ipmi.h>
> +
> +#define P9_RAS_STATUS			0x10a02
> +#define P9_RSTAT_QUIESCED(t)		PPC_BITMASK(0 + 8*(t), 3 + 8*(t))
> +#define P9_RAS_MODEREG			0x10a9d
> +#define P9_DIRECT_CONTROLS		0x10a9c
> +#define P9_DCTL_STOP(t)			PPC_BIT(7 + 8*(t))
> +#define P9_DCTL_CONT(t)			PPC_BIT(6 + 8*(t))
> +#define P9_DCTL_SRESET(t)		PPC_BIT(4 + 8*(t))
> +#define P9_DCTL_PWR(t)			PPC_BIT(32 + 8*(t))
> +
> +#define P9_CORE_THREAD_STATE		0x10ab3
> +#define P9_CTS_STOP(t)			PPC_BIT(56 + (t))
> +
> +#define PPM_GPMMR			0xf0100
> +#define PPM_SPWKUP_OTR			0xf010a
> +#define SPECIAL_WKUP_DONE		PPC_BIT(1)
> +
> +
> +static int core_set_special_wakeup(struct cpu_thread *cpu)
> +{
> +	uint32_t chip_id = pir_to_chip_id(cpu->pir);
> +	uint32_t core_id = pir_to_core_id(cpu->pir);
> +	uint32_t swake_addr;
> +	uint32_t gpmmr_addr;
> +	uint64_t val;
> +	int i;
> +
> +	swake_addr = XSCOM_ADDR_P9_EC(core_id, PPM_SPWKUP_OTR);
> +	gpmmr_addr = XSCOM_ADDR_P9_EC(core_id, PPM_GPMMR);
> +
> +	xscom_read(chip_id, swake_addr, &val);
> +	if (xscom_write(chip_id, swake_addr, PPC_BIT(0))) {
> +		prlog(PR_WARNING, "SRESET: Unable to write SPWKUP_OTR register\n");
> +		return OPAL_HARDWARE;
> +	}
> +	xscom_read(chip_id, swake_addr, &val);
> +
> +	for (i = 0; i < 100; i++) {
> +		if (xscom_read(chip_id, gpmmr_addr, &val)) {
> +			prlog(PR_WARNING, "SRESET: Unable to read GPMMR register\n");
> +			return OPAL_HARDWARE;
> +		}
> +		if (val & SPECIAL_WKUP_DONE)
> +			return 0;
> +
> +		time_wait_us(1);
> +	}
> +
> +	xscom_read(chip_id, swake_addr, &val);
> +	xscom_write(chip_id, swake_addr, 0);
> +	xscom_read(chip_id, swake_addr, &val);
> +
> +	prlog(PR_WARNING, "SRESET: Special wakeup mode could not be set.\n");
> +	return OPAL_HARDWARE;
> +}
> +
> +static void core_clear_special_wakeup(struct cpu_thread *cpu)
> +{
> +	uint32_t chip_id = pir_to_chip_id(cpu->pir);
> +	uint32_t core_id = pir_to_core_id(cpu->pir);
> +	uint32_t swake_addr;
> +	uint64_t val;
> +
> +	swake_addr = XSCOM_ADDR_P9_EC(core_id, PPM_SPWKUP_OTR);
> +
> +	/* De-assert special wakeup bit */
> +	xscom_read(chip_id, swake_addr, &val);
> +	xscom_write(chip_id, swake_addr, 0);
> +	xscom_read(chip_id, swake_addr, &val);
> +}
> +
> +static int thread_quiesced(struct cpu_thread *cpu)
> +{
> +	uint32_t chip_id = pir_to_chip_id(cpu->pir);
> +	uint32_t core_id = pir_to_core_id(cpu->pir);
> +	uint32_t thread_id = pir_to_thread_id(cpu->pir);
> +	uint32_t ras_addr;
> +	uint64_t ras_status;
> +
> +	ras_addr = XSCOM_ADDR_P9_EC(core_id, P9_RAS_STATUS);
> +	if (xscom_read(chip_id, ras_addr, &ras_status)) {
> +		prlog(PR_WARNING, "SRESET: Unable to read status register\n");
> +		return OPAL_HARDWARE;
> +	}
> +
> +	if ((ras_status & P9_RSTAT_QUIESCED(thread_id))
> +		   	== P9_RSTAT_QUIESCED(thread_id))
> +		return 1;
> +
> +	return 0;
> +}
> +
> +static int stop_thread(struct cpu_thread *cpu)
> +{
> +	uint32_t chip_id = pir_to_chip_id(cpu->pir);
> +	uint32_t core_id = pir_to_core_id(cpu->pir);
> +	uint32_t thread_id = pir_to_thread_id(cpu->pir);
> +	uint32_t dctl_addr;
> +	int i;
> +
> +	dctl_addr = XSCOM_ADDR_P9_EC(core_id, P9_DIRECT_CONTROLS);
> +
> +	xscom_write(chip_id, dctl_addr, P9_DCTL_STOP(thread_id));
> +
> +	for (i = 0; i < 100; i++) {
> +		int rc = thread_quiesced(cpu);
> +		if (rc < 0)
> +			break;
> +		if (rc)
> +			return 0;
> +	}
> +
> +	xscom_write(chip_id, dctl_addr, P9_DCTL_CONT(thread_id));
> +	prlog(PR_WARNING, "SRESET: Could not quiesce thread\n");
> +	return OPAL_HARDWARE;
> +}
> +
> +static int sreset_thread(struct cpu_thread *cpu)
> +{
> +	uint32_t chip_id = pir_to_chip_id(cpu->pir);
> +	uint32_t core_id = pir_to_core_id(cpu->pir);
> +	uint32_t thread_id = pir_to_thread_id(cpu->pir);
> +	uint32_t dctl_addr;
> +	uint32_t cts_addr;
> +	uint64_t cts_val;
> +
> +	dctl_addr = XSCOM_ADDR_P9_EC(core_id, P9_DIRECT_CONTROLS);
> +	cts_addr = XSCOM_ADDR_P9_EC(core_id, P9_CORE_THREAD_STATE);
> +
> +	if (xscom_read(chip_id, cts_addr, &cts_val)) {
> +		prlog(PR_WARNING, "SRESET: Unable to read CORE_THREAD_STATE register\n");
> +		return OPAL_HARDWARE;
> +	}
> +	if (!(cts_val & P9_CTS_STOP(thread_id))) {
> +		/* Clear SRR1[46:47] */
> +		if (xscom_write(chip_id, dctl_addr, P9_DCTL_PWR(thread_id))) {
> +			prlog(PR_WARNING, "SRESET: Unable to set power saving mode\n");
> +			return OPAL_HARDWARE;
> +		}
> +	}
> +
> +	if (xscom_write(chip_id, dctl_addr, P9_DCTL_SRESET(thread_id))) {
> +		prlog(PR_WARNING, "SRESET: Unable to write DIRECT_CONTROLS register\n");
> +		return OPAL_HARDWARE;
> +	}
> +
> +	return 0;
> +}
> +
> +// static struct lock sreset_lock = LOCK_UNLOCKED;
> +
> +static int64_t sreset_cpu(struct cpu_thread *cpu)
> +{
> +	int rc;
> +
> +	if (this_cpu() == cpu) {
> +		prlog(PR_WARNING, "SRESET: Unable to reset self\n");
> +		return OPAL_UNSUPPORTED;
> +	}
> +	if (this_cpu()->primary == cpu->primary) {
> +		prlog(PR_WARNING, "SRESET: Unable to reset threads on same core\n");
> +		return OPAL_PARTIAL;
> +	}
> +
> +	rc = thread_quiesced(cpu);
> +	if (rc < 0)
> +		return rc;
> +	if (rc) {
> +		prlog(PR_WARNING, "SRESET: Thread is quiesced already\n");
> +		return OPAL_WRONG_STATE;
> +	}
> +
> +	rc = core_set_special_wakeup(cpu);
> +	if (rc)
> +		return rc;
> +
> +	rc = stop_thread(cpu);
> +	if (rc) {
> +		core_clear_special_wakeup(cpu);
> +		return rc;
> +	}
> +
> +	rc = sreset_thread(cpu);
> +
> +	core_clear_special_wakeup(cpu);
> +
> +	return 0;
> +}
> +
> +int64_t signal_system_reset(int cpu_nr)
> +{
> +	struct cpu_thread *cpu;
> +
> +	if (proc_gen != proc_gen_p9)
> +		return OPAL_UNSUPPORTED;
> +
> +	/* Reset a single CPU */
> +	if (cpu_nr >= 0) {
> +		cpu = find_cpu_by_server(cpu_nr);
> +		if (!cpu) {
> +			printf("SRESET: could not find cpu by server %d\n", cpu_nr);
> +			return OPAL_PARAMETER;
> +		}
> +		return sreset_cpu(cpu);
> +	}
> +	printf("SRESET: unsupported %d\n", cpu_nr);
> +	return OPAL_PARTIAL;
> +}
> diff --git a/hw/xscom.c b/hw/xscom.c
> index 7bd78bf9..f3e04291 100644
> --- a/hw/xscom.c
> +++ b/hw/xscom.c
> @@ -705,6 +705,8 @@ static void xscom_init_chip_info(struct proc_chip *chip)
>  		printf("P9 DD%i.%i%d detected\n", 0xf & (chip->ec_level >> 4),
>  		       chip->ec_level & 0xf, rev);
>  		chip->ec_rev = rev;
> +
> +		opal_register(OPAL_SIGNAL_SYSTEM_RESET, signal_system_reset, 1);
>  	}
>  }
>  
> diff --git a/include/skiboot.h b/include/skiboot.h
> index 4b7d5197..37fd774f 100644
> --- a/include/skiboot.h
> +++ b/include/skiboot.h
> @@ -198,6 +198,9 @@ extern char __sym_map_end[];
>  extern unsigned long get_symbol(unsigned long addr,
>  				char **sym, char **sym_end);
>  
> +/* System reset */
> +extern int64_t signal_system_reset(int cpu_nr);
> +
>  /* Fast reboot support */
>  extern void disable_fast_reboot(const char *reason);
>  extern void fast_reboot(void);
> diff --git a/platforms/mambo/mambo.c b/platforms/mambo/mambo.c
> index cb6e103c..e306ba5c 100644
> --- a/platforms/mambo/mambo.c
> +++ b/platforms/mambo/mambo.c
> @@ -259,7 +259,8 @@ static int64_t mambo_signal_system_reset(int32_t cpu_nr)
>  
>  static void mambo_sreset_init(void)
>  {
> -	opal_register(OPAL_SIGNAL_SYSTEM_RESET, mambo_signal_system_reset, 1);
> +	if (0)
> +		opal_register(OPAL_SIGNAL_SYSTEM_RESET, mambo_signal_system_reset, 1);
>  }
>  
>  static void mambo_platform_init(void)


More information about the Skiboot mailing list