[Skiboot] [PATCH v2] SLW: Add init for power9 power management

[Vaidyanathan Srinivasan]

* Akshay Adiga <akshay.adiga at linux.vnet.ibm.com> [2017-03-24 20:01:49]:

> This patch adds new function to init core for power9 power management.
> SPECIAL_WKUP_* SCOM registers, if set, can hold the cores from going into
> idle states. Hence, clear PPM_SPECIAL_WKUP_HYP_REG scom register for each
> core during init. (This init are not required for MAMBO)
> 
> Signed-off-by: Akshay Adiga <akshay.adiga at linux.vnet.ibm.com>

Reviewed-by: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>

> ---
> v2 Changes :
> 	Handling init for mambo
> 
>  hw/slw.c        | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++-------
>  include/xscom.h |  6 ++++++
>  2 files changed, 57 insertions(+), 7 deletions(-)
> 
> diff --git a/hw/slw.c b/hw/slw.c
> index a1d3eca..6503fa7 100644
> --- a/hw/slw.c
> +++ b/hw/slw.c
> @@ -287,6 +287,39 @@ static bool slw_set_overrides(struct proc_chip *chip, struct cpu_thread *c)
>  	return true;
>  }
> 
> +static bool slw_set_overrides_p9(struct proc_chip *chip, struct cpu_thread *c)
> +{
> +	uint64_t tmp;
> +	int rc;
> +	uint32_t core = pir_to_core_id(c->pir);
> +
> +	/* MAMBO does not require this init */
> +	if (proc_chip_quirks & QUIRK_MAMBO_CALLOUTS) {
> +		return true;
> +	}
> +
> +	/* Clear special wakeup bits that could hold power mgt */
> +	rc = xscom_write(chip->id,
> +			 XSCOM_ADDR_P9_EC_SLAVE(core, EC_PPM_SPECIAL_WKUP_HYP),
> +			 0);
> +	if (rc) {
> +		log_simple_error(&e_info(OPAL_RC_SLW_SET),
> +			"SLW: Failed to write EC_PPM_SPECIAL_WKUP_HYP\n");
> +		return false;
> +	}
> +	/* Read back for debug */
> +	rc = xscom_read(chip->id,
> +			XSCOM_ADDR_P9_EC_SLAVE(core, EC_PPM_SPECIAL_WKUP_HYP),
> +			&tmp);
> +	prlog(PR_NOTICE, "SLW: EC_PPM_SPECIAL_WKUP_HYP read  0x%016llx\n", tmp);
> +	rc = xscom_read(chip->id,
> +			XSCOM_ADDR_P9_EC_SLAVE(core, EC_PPM_SPECIAL_WKUP_OTR),
> +			&tmp);
> +	if (tmp)
> +		prlog(PR_WARNING, "SLW: EC_PPM_SPECIAL_WKUP_OTR read  0x%016llx\n", tmp);
> +	return true;
> +}
> +
>  #ifdef __HAVE_LIBPORE__
>  static bool slw_unset_overrides(struct proc_chip *chip, struct cpu_thread *c)
>  {
> @@ -1128,6 +1161,16 @@ static void slw_patch_regs(struct proc_chip *chip)
>  }
>  #endif /* __HAVE_LIBPORE__ */
> 
> +static void slw_init_chip_p9(struct proc_chip *chip)
> +{
> +	struct cpu_thread *c;
> +
> +	prlog(PR_NOTICE, "SLW: Init chip 0x%x\n", chip->id);
> +
> +	/* At power ON setup inits for power-mgt */
> +	for_each_available_core_in_chip(c, chip->id)
> +		slw_set_overrides_p9(chip, c);
> +}
>  static void slw_init_chip(struct proc_chip *chip)
>  {
>  	int64_t rc;
> @@ -1493,11 +1536,12 @@ void slw_init(void)
>  {
>  	struct proc_chip *chip;
> 
> -	if (proc_gen != proc_gen_p8)
> -		return;
> -
> -	for_each_chip(chip)
> -		slw_init_chip(chip);
> -
> -	slw_init_timer();
> +	if (proc_gen == proc_gen_p8) {
> +		for_each_chip(chip)
> +			slw_init_chip(chip);
> +		slw_init_timer();
> +	} else if (proc_gen == proc_gen_p9) {
> +		for_each_chip(chip)
> +			slw_init_chip_p9(chip);
> +	}
>  }
> diff --git a/include/xscom.h b/include/xscom.h
> index bad9140..fae956d 100644
> --- a/include/xscom.h
> +++ b/include/xscom.h
> @@ -143,6 +143,12 @@
>  #define XSCOM_ADDR_P9_EC_SLAVE(core, addr) \
>  	XSCOM_ADDR_P9_EC(core, (addr) | 0xf0000)
> 
> +/* Power 9 EC slave per-core power mgt slave registers */
> +#define EC_PPM_SPECIAL_WKUP_OTR		0x010A
> +#define EC_PPM_SPECIAL_WKUP_FSP		0x010B
> +#define EC_PPM_SPECIAL_WKUP_OCC		0x010C
> +#define EC_PPM_SPECIAL_WKUP_HYP		0x010D
> +
>  /************* XXXX Move these P8 only registers elswhere !!! ****************/
> 
>  /* Per core power mgt registers */
> -- 
> 2.5.5
>